summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2022-07-12ice: change devlink code to read NVM in blocksPaul M Stillwell Jr
When creating a snapshot of the NVM the driver needs to read the entire contents from the NVM and store it. The NVM reads are protected by a lock that is shared between the driver and the firmware. If the driver takes too long to read the entire NVM (which can happen on some systems) then the firmware could reclaim the lock and cause subsequent reads from the driver to fail. We could fix this by increasing the timeout that we pass to the firmware, but we could end up in the same situation again if the system is slow. Instead have the driver break the reading of the NVM into blocks that are small enough that we have confidence that the read will complete within the timeout time, but large enough not to cause significant AQ overhead. Fixes: dce730f17825 ("ice: add a devlink region for dumping NVM contents") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12ice: handle E822 generic device ID in PLDM headerPaul M Stillwell Jr
The driver currently presumes that the record data in the PLDM header of the firmware image will match the device ID of the running device. This is true for E810 devices. It appears that for E822 devices that this is not guaranteed to be true. Fix this by adding a check for the generic E822 device. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12net: marvell: prestera: fix missed deinit sequenceYevhen Orlov
Add unregister_fib_notifier as rollback of register_fib_notifier. Fixes: 4394fbcb78cf ("net: marvell: prestera: handle fib notifications") Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20220710122021.7642-1-yevhen.orlov@plvision.eu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-09nfp: fix issue of skb segments exceeds descriptor limitationBaowen Zheng
TCP packets will be dropped if the segments number in the tx skb exceeds limitation when sending iperf3 traffic with --zerocopy option. we make the following changes: Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from outside because it will be changed after skb_linearize operation. Fill maximum dma_len in first tx descriptor to make sure the whole head is included in the first descriptor. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-07net: ocelot: fix wrong time_after usagePavel Skripkin
Accidentally noticed, that this driver is the only user of while (time_after(jiffies...)). It looks like typo, because likely this while loop will finish after 1st iteration, because time_after() returns true when 1st argument _is after_ 2nd one. There is one possible problem with this poll loop: the scheduler could put the thread to sleep, and it does not get woken up for OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done its thing, but you exit the while loop and return -ETIMEDOUT. Fix it by using sane poll API that avoids all problems described above Fixes: 753a026cfec1 ("net: ocelot: add FDMA support") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07Merge tag 'mlx5-fixes-2022-07-06' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-07-06 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Ring the TX doorbell on DMA errors net/mlx5e: Fix capability check for updating vnic env counters net/mlx5e: CT: Use own workqueue instead of mlx5e priv net/mlx5: Lag, correct get the port select mode str net/mlx5e: Fix enabling sriov while tc nic rules are offloaded net/mlx5e: kTLS, Fix build time constant test in RX net/mlx5e: kTLS, Fix build time constant test in TX net/mlx5: Lag, decouple FDB selection and shared FDB net/mlx5: TC, allow offload from uplink to other PF's VF ==================== Link: https://lore.kernel.org/r/20220706231309.38579-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: ethernet: ti: am65-cpsw: Fix devlink port register sequenceSiddharth Vadapalli
Renaming interfaces using udevd depends on the interface being registered before its netdev is registered. Otherwise, udevd reads an empty phys_port_name value, resulting in the interface not being renamed. Fix this by registering the interface before registering its netdev by invoking am65_cpsw_nuss_register_devlink() before invoking register_netdev() for the interface. Move the function call to devlink_port_type_eth_set(), invoking it after register_netdev() is invoked, to ensure that netlink notification for the port state change is generated after the netdev is completely initialized. Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07net: stmmac: dwc-qos: Disable split header for Tegra194Jon Hunter
There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06r8169: fix accessing unset transport headerHeiner Kallweit
66e4c8d95008 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed68187 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4de3ed ("r8169: work around RTL8125 UDP hw bug") Reported-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06net/mlx5e: Ring the TX doorbell on DMA errorsMaxim Mikityanskiy
TX doorbells may be postponed, because sometimes the driver knows that another packet follows (for example, when xmit_more is true, or when a MPWQE session is closed before transmitting a packet). However, the DMA mapping may fail for the next packet, in which case a new WQE is not posted, the doorbell isn't updated either, and the transmission of the previous packet will be delayed indefinitely. This commit fixes the described rare error flow by posting a NOP and ringing the doorbell on errors to flush all the previous packets. The MPWQE session is closed before that. DMA mapping in the MPWQE flow is moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions are not allowed. Stop room always has enough space for a NOP, because the actual TX WQE is not posted. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix capability check for updating vnic env countersGal Pressman
The existing capability check for vnic env counters only checks for receive steering discards, although we need the counters update for the exposed internal queue oob counter as well. This could result in the latter counter not being updated correctly when the receive steering discards counter is not supported. Fix that by checking whether any counter is supported instead of only the steering counter capability. Fixes: 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: CT: Use own workqueue instead of mlx5e privRoi Dayan
Allocate a ct priv workqueue instead of using mlx5e priv one so flushing will only be of related CT entries. Also move flushing of the workqueue before rhashtable destroy otherwise entries won't be valid. Fixes: b069e14fff46 ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: Lag, correct get the port select mode strLiu, Changcheng
mode & mode_flags is updated at the end of mlx5_activate_lag which may not reflect the actual mode as shown in below logic: mlx5_activate_lag(struct mlx5_lag *ldev, |-- unsigned long flags = 0; |-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags); |-- err = mlx5_create_lag(ldev, tracker, mode, flags); |-- mlx5_get_str_port_sel_mode(ldev); |-- ldev->mode = mode; |-- ldev->mode_flags = flags; Use mode & flag as parameters to get port select mode info. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix enabling sriov while tc nic rules are offloadedPaul Blakey
There is a total of four 4M entries flow tables. In sriov disabled mode, ct, ct_nat and post_act take three of them. When adding the first tc nic rule in this mode, it will take another 4M table for the tc <chain,prio> table. If user then enables sriov, the legacy flow table tries to take another 4M and fails, and so enablement fails. To fix that, have legacy fdb take the next available maximum size from the fs ft pool. Fixes: 4a98544d1827 ("net/mlx5: Move chains ft pool to be used by all firmware steering") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: kTLS, Fix build time constant test in RXTariq Toukan
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison against the size of the private RX TLS driver context. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: kTLS, Fix build time constant test in TXTariq Toukan
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison against the size of the private TX TLS driver context. Fixes: df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: Lag, decouple FDB selection and shared FDBMark Bloch
Multiport eswitch is required to use native FDB selection instead of affinity, This was achieved by passing the shared_fdb flag down the HW lag creation path. While it did accomplish the goal of setting FDB selection mode to native, it had the side effect of also creating a shared FDB configuration. This created a few issues: - TC rules are inserted into a non active FDB, which means traffic isn't offloaded as all traffic will reach only a single FDB. - All wire traffic is treated as if a single physical port received it; while this is true for a bond configuration, this shouldn't be the case for multiport eswitch. Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE to indicate what FDB selection mode should be used. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: TC, allow offload from uplink to other PF's VFEli Cohen
Redirecting traffic from uplink to a VF is a legal operation of mulitport eswitch mode. Remove the limitation. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: Fix matchall police parameters validationVlad Buslov
Referenced commit prepared the code for upcoming extension that allows mlx5 to offload police action attached to flower classifier. However, with regard to existing matchall classifier offload validation should be reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police action and extend scan_tc_matchall_fdb_actions() to only allow such actions with matchall classifier. Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-05net: lan966x: hardcode the number of external portsMichael Walle
Instead of counting the child nodes in the device tree, hardcode the number of ports in the driver itself. The counting won't work at all if an ethernet port is marked as disabled, e.g. because it is not connected on the board at all. It turns out that the LAN9662 and LAN9668 use the same switching IP with the same synthesis parameters. The only difference is that the output ports are not connected. Thus, we can just hardcode the number of physical ports to 8. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04ibmvnic: Properly dispose of all skbs during a failover.Rick Lindsley
During a reset, there may have been transmits in flight that are no longer valid and cannot be fulfilled. Resetting and clearing the queues is insufficient; each skb also needs to be explicitly freed so that upper levels are not left waiting for confirmation of a transmit that will never happen. If this happens frequently enough, the apparent backlog will cause TCP to begin "congestion control" unnecessarily, culminating in permanently decreased throughput. Fixes: d7c0ef36bde03 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change") Tested-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Rick Lindsley <ricklind@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30i40e: Fix VF's MAC Address change on VMNorbert Zulinski
Clear VF MAC from parent PF and remove VF filter from VSI when both conditions are true: -VIRTCHNL_VF_OFFLOAD_USO is not used -VM MAC was not set from PF level It affects older version of IAVF and it allow them to change MAC Address on VM, newer IAVF won't change their behaviour. Previously it wasn't possible to change VF's MAC Address on VM because there is flag on IAVF driver that won't allow to change MAC Address if this address is given from PF driver. Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30i40e: Fix dropped jumbo frames statisticsLukasz Cieplicki
Dropped packets caused by too large frames were not included in dropped RX packets statistics. Issue was caused by not reading the GL_RXERR1 register. That register stores count of packet which was have been dropped due to too large size. Fix it by reading GL_RXERR1 register for each interface. Repro steps: Send a packet larger than the set MTU to SUT Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0" Fixes: 41a9e55c89be ("i40e: add missing VSI statistics") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30net: sparx5: mdb add/del handle non-sparx5 devicesCasper Andersson
When adding/deleting mdb entries on other net_devices, eg., tap interfaces, it should not crash. Fixes: 3bacfccdcb2d ("net: sparx5: Add mdb handlers") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30mlxsw: spectrum_router: Fix rollback in tunnel next hop initPetr Machata
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When that function results in an error, the next hop will not have been removed from the linked list. As the error is propagated upwards and the caller frees the next hop object, the linked list ends up holding an invalid object. A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback block does exist, however does not include the linked list removal. Both IPv6 and IPv4 next hops have a similar issue with next-hop counter rollbacks. As these were introduced in the same patchset as the next hop linked list, include the cleanup in this patch. Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list") Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-27octeon_ep: use bitwise ANDShreenidhi Shedi
This should be bitwise operator not logical. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com> Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27epic100: fix use after free on rmmodTong Zhang
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-21 This series contains updates to ice driver only. Marcin fixes GTP filters by allowing ignoring of the inner ethertype field. Wojciech adds VSI handle tracking in order to properly distinguish similar filters for removal. Anatolii removes ability to set 1000baseT and 1000baseX fields concurrently which caused link issues. He also disallows setting channels to less than the number of Traffic Classes which would cause NULL pointer dereference. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload ==================== Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22igb: Make DMA faster when CPU is active on the PCIe linkKai-Heng Feng
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22hinic: Replace memcpy() with direct assignmentKees Cook
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out. Avoid the whole thing and just do a direct assignment. This results in no change to the executable code. [This is a duplicate of commit 2c0ab32b73cf ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.] Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in ↵Jakub Kicinski
vxge-main.c" This reverts commit 8fc74d18639a2402ca52b177e990428e26ea881f. BAR0 is the main (only?) register bank for this device. We most obviously can't unmap it before the netdev is unregistered. This was pointed out in review but the patch got reposted and merged, anyway. The author of the patch was only testing it with a QEMU model, which I presume does not emulate enough for the netdev to be brought up (author's replies are not visible in lore because they kept sending their emails in HTML). Link: https://lore.kernel.org/all/20220616085059.680dc215@kernel.org/ Fixes: 8fc74d18639a ("drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-21ice: ethtool: Prohibit improper channel config for DCBAnatolii Gerasymenko
Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: ethtool: advertise 1000M speeds properlyAnatolii Gerasymenko
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: Fix switchdev rules book keepingWojciech Drewek
Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: ignore protocol field in GTP offloadMarcin Szycik
Commit 34a897758efe ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-19drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.cWentao_Liang
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister. 4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. } This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN. /***************************start**************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint /*****************************end*****************************/ After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed. /*****************************start***************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~# /******************************end****************************/ Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17igb: fix a use-after-free issue in igb_clean_tx_ringLorenzo Bianconi
Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: axienet: add missing error return code in axienet_probe()Yang Yingliang
It should return error code in error path in axienet_probe(). Fixes: 00be43a74ca2 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-14 This series contains updates to ice driver only. Michal fixes incorrect Tx timestamp offset calculation for E822 devices. Roman enforces required VLAN filtering settings for double VLAN mode. Przemyslaw fixes memory corruption issues with VFs by ensuring queues are disabled in the error path of VF queue configuration and to disabled VFs during reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-14net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14ice: Fix memory corruption in VF driverPrzemyslaw Patynowski
Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a436bdf ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix queue config fail handlingPrzemyslaw Patynowski
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Sync VLAN filtering features for DVMRoman Storozhenko
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix PTP TX timestamp offset calculationMichal Michalik
The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-13amd-xgbe: Use platform_irq_count()Jean-Philippe Brucker
The AMD XGbE driver currently counts the number of interrupts assigned to the device by inspecting the pdev->resource array. Since commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed IRQs from this array, the driver now attempts to get all interrupts from 1 to -1U and gives up probing once it reaches an invalid interrupt index. Obtain the number of IRQs with platform_irq_count() instead. Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13octeontx2-vf: Add support for adaptive interrupt coalescingSuman Ghosh
Fixes: 6e144b47f560 (octeontx2-pf: Add support for adaptive interrupt coalescing) Added support for VF interfaces as well. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13xilinx: Fix build on x86.David S. Miller
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: Use iowrite64 to write all 64b descriptor pointersAndy Chiu
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: make the 64b addresable DMA depends on 64b archecturesAndy Chiu
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-27 16:43:29 +0000