summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2015-10-27qede: Add support for linkSudarsana Kalluru
This adds basic link functionality to qede - driver still doesn't provide users with an API to change any link property, but it does request qed to initialize the link using default configuration, and registers a callback that allows it to get link notifications. This patch adds the ability of the driver to set the carrier as active and to enable traffic as a result of async. link notifications. Following this patch, driver should be capable of running traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qed: Add link supportYuval Mintz
Physical link is handled by the management Firmware. This patch lays the infrastructure for attention handling in the driver, as link change notifications arrive via async. attentions, as well the handling of such notifications. This patch also extends the API with the protocol drivers by adding registered callbacks which the protocol driver passes to qed in order to be notified of async. events originating from the FW/HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qede: classification configurationSudarsana Kalluru
Add the ability to configure basic classification in driver by implementing ndo_set_mac_address() and ndo_set_rx_mode(). Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qede: Add basic network device supportYuval Mintz
This patch includes the basic Rx/Tx support for the driver [although carrier will still never be turned on]. Following this patch the driver registers a network device, initializes it and prepares it for traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qed: Add slowpath L2 supportManish Chopra
This patch adds to the qed the support to configure various L2 elements, such as channels and basic filtering conditions. It also enhances its public API to allow qede to later utilize this functionality. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qede: Add basic Network driverYuval Mintz
The Qlogic Everest Driver for Ethernet is the Ethernet specific module for QL4xxx ethernet products by Qlogic. This patch adds a very minimal PCI driver, one that doesn't yet register a network device, but one that does interact with qed and does a basic initialization of the HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qed: Add basic L2 interfaceYuval Mintz
This patch adds a public API for a network driver to work on top of QED. The interface itself is very minimal - it's mostly infrastructure, as the only content it has after this patch is a query for HW-based information required for the creation of a network interface [I.e., no actual protocol-specific configurations are supported]. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27qed: Add module with basic common supportYuval Mintz
The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25bnxt_en: Fix compile warnings when CONFIG_INET is not set.Michael Chan
bnxt_gro_skb() has unused variables when CONFIG_INET is not set. We really cannot support hardware GRO if CONFIG_INET is not set, so compile out bnxt_gro_skb() completely and define BNXT_FLAG_GRO to be 0 if CONFIG_INET is not set. This will effectively always disable hardware GRO if CONFIG_INET is not set. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25net: encx24j600: Fix mask to update LED configurationJon Ringle
This fixes the mask used to update the LED configuration so that it clears the necessary bits as well as setting the bits according to the mask. Also reverse the LED configuration to show the Link state + collisions in LEDA and the Link state + TX/RX events in LEDB. Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25net: mvneta: Fix clearing of MIB statisticsAndrew Lunn
The existing function to clear the MIB statatistics was using the wrong address for the registers. Also, the counters would of been cleared when the interface was brought up, not during the probe. Fix both of these. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25net: mvneta: add ethtool statisticsRussell King
Add support for the ethtool statistic interface, returning the full set of statistics which both Armada 370, 38x and Armada XP can support. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23bnxt_en: Fix compile errors when CONFIG_BNXT_SRIOV is not set.Michael Chan
struct bnxt_pf_info needs to be always defined. Move bnxt_update_vf_mac() to bnxt_sriov.c and add some missing #ifdef CONFIG_BNXT_SRIOV. Reported-by: Jim Hull <jim.hull@hpe.com> Tested-by: Jim Hull <jim.hull@hpe.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-23 This series contains updates to i40e, i40evf, if_link, ixgbe and ixgbevf. Anjali adds a workaround to drop any flow control frames from being transmitted from any VSI, so that a malicious VF cannot send flow control or PFC packets out on the wire. Also fixed a bug in debugfs by grabbing the filter list lock before adding or deleting a filter. Akeem fixes an issue where we were unconditionally returning VEB bridge mode before allowing LB in the add VSI routine, resolve by checking if the bridge is actually in VEB mode first. Mitch fixed an issue where the incorrect structure was being used for VLAN filter list, which meant the VLAN filter list did not get processed correctly and VLAN filters would not be re-enabled after any kind of reset. Helin fixed a problem of possibly getting inconsistent flow control status after a PF reset. The issue was requested_mode was being set with a default value during probe, but the hardware state could be a different value from this mode. Carolyn fixed a problem where the driver output of the OEM version string varied from the other tools. Jean Sacren fixes up kernel documentation by fixing function header comments to match actual variables used in the functions. Also cleaned up variable initialization, when the variable would be over-written immediately. Hiroshi Shimanoto provides three patches to add "trusted" VF by adding netlink directives and an NDO entry. Then implement these new controls in ixgbe and ixgbevf. This series has gone through several iterations to address all the suggested community changes and concerns. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23ixgbe, ixgbevf: Add new mbox API xcast modeHiroshi Shimamoto
The limitation of the number of multicast address for VF is not enough for the large scale server with SR-IOV feature. IPv6 requires the multicast MAC address for each IP address to handle the Neighbor Solicitation message. We couldn't assign over 30 IPv6 addresses to a single VF. This patch introduces the new mailbox API, IXGBE_VF_UPDATE_XCAST_MODE, to update multicast mode of VF. This adds 3 modes; - NONE only L2 exact match addresses or Flow Director enabled - MULTI BAM and ROMPE set - ALLMULTI BAM, ROMPE and MPE set If a guest VF user wants over 30 MAC multicast addresses, set IFF_ALLMULTI to request PF to update xcast mode to enable VF multicast promiscuous mode. On the other hand, enabling VF multicast promiscuous mode may affect security and performance in the network of the NIC. Only trusted VF can enable multicast promiscuous mode. The behavior of untrusted VF is the same as previous version. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23ixgbe: Add new ndo to trust VFHiroshi Shimamoto
Implements the new netdev op to trust VF in ixgbe. The administrator can turn on and off VF trusted by ip command which supports trust message. # ip link set dev eth0 vf 1 trust on or # ip link set dev eth0 vf 1 trust off Send a ping to reset VF on changing the status of trusting. VF driver will reconfigure its features on reset. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23drivers: net: cpsw: use module_platform_driverGrygorii Strashko
There is no reasons to probe cpsw from late_initcall level and it's not recommended. Hence, use module_platform_driver() to register and probe cpsw driver from module_init() level. Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23i40e: fix unconditional execution of cpu_to_le16()Jean Sacren
The commit 3092e5e4cc79 ("i40e: add little endian conversion for checksum") fixed the checksum bug on big-endian architecture. But we should not execute cpu_to_le16() unconditionally. Thus, put cpu_to_le16() under certain condition. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: clean up local variable initializationJean Sacren
In both i40e_calc_nvm_checksum() and i40e_update_nvm_checksum(), the local variables designated by 'ret_code' are overwritten immediately. As such, they should merely be declared. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40evf: clean up local variable initializationJean Sacren
In i40evf_msix_aq(), the first two lines of rd32() are mainly to clear the registers. If we initialize 'val' at this point, it will be overwritten immediately. We shall simply discard the return value here. When we initialize 'val', we might as well include the mask in one step. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: add missing kernel-doc argumentJean Sacren
The following kernel-doc arguments for their respective functions are missing: 1) @cd_type_cmd_tso_mss for i40e_tso(); 2) @cd_type_cmd_tso_mss for i40e_tsyn(); 3) @tx_ring for i40e_tx_enable_csum(). Add them all for the kernel-doc requirement. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40evf: add missing kernel-doc argumentJean Sacren
@flush has been missing since the inception of i40evf_irq_enable(). Add it for the kernel doc. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: re-use %*ph specifier to hexdump a dataAndy Shevchenko
Instead of using a custom approach change the code to use %*ph format specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e/i40evf: Bump i40e to 1.3.46 and i40evf to 1.3.33Catherine Sullivan
Bump up the version... Change-ID: Ib8d501021671ba20250115ed54330e2c182255b7 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: Disable VEB bridge mode with SR-IOV failureAkeem G Abodunrin
If a call to enable SR-IOV in the kernel failed, we need to disable I40E_FLAG_VEB_MODE_ENABLED, so that bridge mode could fall back to VEPA, which is a default. Change-ID: I12b6f776769506db85b29bea94b9c88d0b5ee65e Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: Fix an incorrect OEM version stringCarolyn Wyborny
This patch fixes a problem where the driver output of the OEM version string varied from the other tools. The mask value and the order of operations were incorrect, per the original change request. Without this patch, the version string will appear incorrect from the driver. Change-ID: Ie1ca6485284b4ce3b57e5a99b18b7641617c7ef7 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: fix inconsistent statuses after a PF resetHelin Zhang
This patch fixes a problem of possibly getting inconsistent flow control statuses after a PF reset. Requested_mode was being set with a default value during probing, but the initial HW state could be different from this mode. Change-ID: I772bf07b78616e87086418d4bd87954b66fa17cd Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40evf: use correct struct for list manipulationMitch Williams
Not sure how this compiles at all. Use the correct struct for manipulating the VLAN filter list. Without this, the VLAN filter list doesn't get processed correctly, and VLAN filters will not be re-enabled after any kind of reset. Change-ID: Iceff2dc089f303058fb71ecb08419eed471e0e90 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: Fix VEB/VEPA bridge mode mismatch issueAkeem G Abodunrin
Fix i40e_is_vsi_uplink_mode_veb to check if bridge is actually in VEB mode before allowing LB in the add VSI routine, instead of unconditionally returning VEB bridge mode. Change-ID: I162397b1bdd02367735fe9baaeb51465be2a3ce9 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: fix a bug in debugfs with add/del macaddrAnjali Singhai Jain
The new code flow requires us to grab the filter list lock before adding/deleting the filter. Change-ID: I4eaef508ab4da2d1b2e23f20f2a78d931d5b6aeb Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e/i40evf: Add a workaround to drop all flow control framesAnjali Singhai Jain
This patch adds a workaround to drop any flow control frames from being transmitted from any VSI. FW can still send flow control frames if flow control is enabled. With this patch in place a malicious VF cannot send flow control or PFC packets out on the wire. Change-ID: I4303b24e98b93066d2767fec24dfe78be591c277 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23amd-xgbe: Use wmb before updating current descriptor countLendacky, Thomas
The code currently uses the lightweight dma_wmb barrier before updating the current descriptor count. Under heavy load, the Tx cleanup routine was seeing the updated current descriptor count before the updated descriptor information. As a result, the Tx descriptor was being cleaned up before it was used because it was not "owned" by the hardware yet, resulting in a Tx queue hang. Using the wmb barrier insures that the descriptor is updated before the descriptor counter preventing the Tx queue hang. For extra insurance, the Tx cleanup routine is changed to grab the current decriptor count on entry and uses that initial value in the processing loop rather than trying to chase the current value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22bnxt_en: New Broadcom ethernet driver.Michael Chan
Broadcom ethernet driver for the new family of NetXtreme-C/E ethernet devices. v5: - Removed empty blank lines at end of files (noted by David Miller). - Moved busy poll helper functions to bnxt.h to at least make the .c file look less cluttered with #ifdef (noted by Stephen Hemminger). v4: - Broke up 2 long message strings with "\n" (suggested by John Linville) - Constify an array of strings (suggested by Stephen Hemminger) - Improve bnxt_vf_pciid() (suggested by Stephen Hemminger) - Use PCI_VDEVICE() to populate pci_device_id table for more compact source. v3: - Fixed 2 more sparse warnings. - Removed some unused structures in .h files. v2: - Fixed all kbuild test robot reported warnings. - Fixed many of the checkpatch.pl errors and warnings. - Fixed the Kconfig description (noted by Dmitry Kravkov). Acked-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22i40e: fix annoying messageJesse Brandeburg
The driver was printing a message about not being able to assign VMDq because of a lack of MSI-X vectors. This was because a line was missing that initialized a variable, simply a merge error. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-22i40e: fix stats offsetsJesse Brandeburg
The code was setting up stats that were not being initialized. This caused several counters to be displayed incorrectly, due to indexing beyond the array of strings when printing stats. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-22net: hisilicon: deals with the sub ctrl by sysconyankejian
the global Soc configuration is treated by syscon, and sub ctrl bus is Soc bus. it has to be treated by syscon. Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: lisheng <lisheng011@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Update ethtool get_drvinfo to get regdump lenHariprasad Shenai
Update ethtool get_drvinfo to display regdump len and also update firmware string version print to display N/A in case FW isn't present Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Use vmalloc, if kmalloc failsHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Return error if setup_rss is called before probeHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4/cxgb4vf: Update driver desc. to include Chelsio T6 adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Add info print to display number of MSI-X vectors allocatedHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Restore L1 cfg, if FW rejects new L1 cfg settingsHariprasad Shenai
In the ethtool set_settings() routine we need to remember our old L1 Configuration in case the firmware rejects the request and then restore that. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Don't disallow turning off auto-negotiationHariprasad Shenai
For {1, 10, 40} Gb/s. Prohibiting turning off autonegotiation isn't anywhere in the standard. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4: Align ethtool get stat settingsHariprasad Shenai
Align the ethtool get stats settings with the rest so it looks uniform Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: sun4i-emac: Properly free resources on probe failure and removeHans de Goede
Fix sun4i-emac not releasing the following resources: -iomapped memory not released on probe-failure nor on remove -clock not getting disabled on probe-failure nor on remove -sram not being released on remove And while at it also add error checking to the clk_prepare_enable call done on probe. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: hisilicon: fix ptr_ret.cocci warningsWu Fengguang
drivers/net/ethernet/hisilicon/hns/hnae.c:442:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: cavium: change NET_VENDOR_CAVIUM to boolAndreas Schwab
CONFIG_NET_VENDOR_CAVIUM is only used to hide/show config options and to include subdirectories in the build, so it doesn't make sense to make it tristate. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: mv643xx_eth: Defer writing the first TX descriptor when using TSOPhilipp Kirchhofer
To prevent a race between the TX DMA engine and the CPU the writing of the first transmit descriptor must be deferred until all following descriptors have been updated. The network card may otherwise start transmitting before all packet descriptors are set up correctly, which leads to data corruption or an aborted transmit operation. This deferral is already done in the non-TSO TX path, implement it also in the TSO TX path. Signed-off-by: Philipp Kirchhofer <philipp@familie-kirchhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: mv643xx_eth: Ensure proper data alignment in TSO TX pathPhilipp Kirchhofer
The TX DMA engine requires that buffers with a size of 8 bytes or smaller must be 64 bit aligned. This requirement may be violated when doing TSO, as in this case larger skb frags can be broken up and transmitted in small parts with then inappropriate alignment. Fix this by checking for proper alignment before handing a buffer to the DMA engine. If the data is misaligned realign it by copying it into the TSO header data area. Signed-off-by: Philipp Kirchhofer <philipp@familie-kirchhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-29 09:59:05 +0000