summaryrefslogtreecommitdiff
path: root/drivers/net/fddi
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-19net: defxx: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08format-security: move static strings to constKees Cook
While examining output from trial builds with -Wformat-security enabled, many strings were found that should be defined as "const", or as a char array instead of char pointer. This makes some static analysis easier, by producing fewer false positives. As these are all trivial changes, it seemed best to put them all in a single patch rather than chopping them up per maintainer. Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c] Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Jiri Slaby <jslaby@suse.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kejian Yan <yankejian@huawei.com> Cc: Daode Huang <huangdaode@hisilicon.com> Cc: Qianqian Xie <xieqianqian@huawei.com> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Christian Gromm <christian.gromm@microchip.com> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: Jason Litzinger <jlitzingerdev@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-29fddi: skfp: Use more common logging stylesJoe Perches
Several macros use non-standard styles where format and arguments are not verified. Convert these to a more typical fmt, ##__VA_ARGS__ use so format and arguments match as appropriate. Miscellanea: o Fix format and argument mismatches o Realign and reindent misindented block o Strip newlines from formats and add to macro defines o Coalesce a few consecutive logging uses to more simple single uses Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29skfp: hwmtm: Use proper logging macros, correct mismatchesJoe Perches
Logging macros should allow format and argument validation. The DB_TX, DB_RX, and DB_GEN macros did not. Update the macros and uses and add no_printk validation to the previously compiled away #ifndef DEBUG variants. Done with coccinelle and some typing. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-21net: fddi: skfp: use %p format specifier for addresses rather than %xColin Ian King
Trivial fix: Addresses should be printed using the %p format specifier rather than using %x. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15net: skfb: remove obsolete -I cflagArnd Bergmann
The skfp driver has been moved to drivers/net/fddi/skfp a long time ago, but we still attempt to include headers from the old location, which causes a warning when building with W=1: cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs] Clearly this include directive is not needed any more, so we can just remove it now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25defxx: fix build warningSudip Mukherjee
We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net/fddi: remove HWM_REVERSE() macroyalin wang
HWM_REVERSE() macro is unused, remove it. Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07fddi: print an address with %p format specifier rather than %xColin Ian King
The debug is printing the struct smt_header * address using the %x format specifier. Fix it to use %p instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net: fddi: skfp: smt.c: Remove unused functionRickard Strandqvist
Remove the function smt_ifconfig() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21defxx: Clean up DEFEA resource managementMaciej W. Rozycki
Reserve DEFEA resources according to actual use. There are three regions, for the ESIC ASIC's CSRs, for the discrete Burst Holdoff register, and for the PDQ ASIC's CSRs. The latter is mapped in the memory or port I/O address space depending on configuration. The two formers are hardwired and always mapped in the port I/O address space. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21defxx: Disable DEFEA's ESIC I/O decoding on shutdownMaciej W. Rozycki
Make sure the option card does not respond after shutdown by disabling it via ESIC's Expansion Board Control register. Also disable memory and port I/O decoders, the latter in particular to disable slot-specific I/O decoding that otherwise remains active even in the board is disabled. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21defxx: Correct DEFEA's ESIC MMIO decodingMaciej W. Rozycki
Use ESIC's memory area 1 (MEMCS1) and its Memory Address High Compare and Memory Address Low Compare registers to set up the MMIO range for decoding accesses to PDQ ASIC registers. Previously the PDQ ASIC was thought to be addressable with the memory area 0 (MEMCS0) and its Memory Address Compare and Memory Address Mask registers. The MMIO range allocated for the option card is preset via ECU (EISA Configuration Utility) and can be disabled, so handle such a case gracefully too. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21defxx: Fix DEFPA enable error propagationMaciej W. Rozycki
Correctly propagate the error code from `pci_enable_device' if non zero. Currently a failure of this function is correctly recognized and device initialization abandoned, however a successful completion code returned. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's ESIC port I/O decoding cleanupMaciej W. Rozycki
Use the slot-specific I/O range for decoding accesses to PDQ ASIC registers (IOCS0) and the discrete Burst Holdoff register (IOCS1) as per the "HD64981F EISA Slave Interface Controller (ESIC)" datasheet. Use disjoint decode ranges now that the assignment of chip selects is known. Update the span of the port I/O resource requested accordingly. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's Burst Holdoff register initialization fixMaciej W. Rozycki
Use the mask rather than bit number macro to initialize the chip select control bit for PDQ register space decoding in the Burst Holdoff register. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: Correct DEFEA's ESIC port I/O accessesMaciej W. Rozycki
Reverse the order of arguments to `outb', data to write comes first. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macrosChen Gang
They are use less, and may generate compiling warnings, so remove them (microblaze, arc, arm64, and unicore32 have already defined PCI_IOBASE). The related warnings (with allmodconfig under microblaze): CC [M] drivers/net/fddi/skfp/skfddi.o In file included from drivers/net/fddi/skfp/skfddi.c:95:0: drivers/net/fddi/skfp/h/skfbi.h:151:0: warning: "PCI_IOBASE" redefined #define PCI_IOBASE 0xffffff00L /* Bit 31..8: I/O Base address */ ^ In file included from include/linux/io.h:22:0, from include/linux/pci.h:31, from drivers/net/fddi/skfp/skfddi.c:82: ./arch/microblaze/include/asm/io.h:33:0: note: this is the location of the previous definition #define PCI_IOBASE ((void __iomem *)_IO_BASE) ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Fix issues with debug printk callsMaciej W. Rozycki
This fixes issues with debug printk calls across the driver, normally disabled; first compilation errors: drivers/net/fddi/defxx.c:676:1: error: pasting "(" and ""In dfx_bus_init...\n"" does not give a valid preprocessing token drivers/net/fddi/defxx.c:820:1: error: pasting "(" and ""In dfx_bus_uninit...\n"" does not give a valid preprocessing token and so on, and then warnings: drivers/net/fddi/defxx.c: In function 'dfx_driver_init': drivers/net/fddi/defxx.c:1132: warning: format '%0X' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' drivers/net/fddi/defxx.c:1132: warning: format '%0X' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' etc. Additionally casts are removed from virtual addresses and %p used. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Add missing DMA synchronisation callsMaciej W. Rozycki
This adds DMA synchronisation calls needed in the receive path: 1. To retrieve the Receive Status word that is prepended by the PDQ DMA engine in the receive buffer, and provides information about the frame received, including its size and any errors. 2. To make data received available for copying in the small-frame case (size <= SKBUFF_RX_COPYBREAK) where the original DMA buffer will be returned to the receive descriptor ring and therefore its mapping retained. With DMA mapping error handling in place, added by the other patch, this may now also trigger where an attempt to map a newly allocated buffer for DMA has failed. In that case data from the original buffer will be copied out and the buffer returned to the DMA descriptor ring. These calls may do nothing when data is in the host DMA addressing range of the FDDI interface, such as always on 32-bit systems, however their absence makes frame reception stop functioning reliably on systems that have memory beyond the low 4GB of the address space. Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Handle DMA mapping errorsMaciej W. Rozycki
This adds error handling for DMA mapping requests; I think there isn't much else to say about it. A good side-effect is the mapping in the transmit path is now made with the board lock released. Also if DMA mapping fails for a newly allocated receive buffer, then data from the old buffer will be copied out (as is presently done for small frames only whose size does not exceed SKBUFF_RX_COPYBREAK) and the original buffer returned, with its mapping unchanged, to the DMA descriptor ring. Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Use netdev_alloc_skb consistentlyMaciej W. Rozycki
Switch the two remaining places across the driver that use dev_alloc_skb to netdev_alloc_skb. Another place has already been converted to use __netdev_alloc_skb, no idea why these two have been left behind. Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Discard DMA maps on buffer deallocationMaciej W. Rozycki
Prearranged receive DMA bounce buffer mappings are not released in the card reboot/shutdown path. That does not affect frame reception, but probably explains the random segmentation fault I observed the other day on interface shutdown. Card is rebooted as required by the spec in the process of ring fault recovery when a PC Trace signal has been received. This change fixes the problem in an obvious manner. Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08defxx: Correct the receive DMA map sizeMaciej W. Rozycki
Receive DMA maps are oversized, they include EISA legacy 128-byte alignment padding in size calculation whereas this padding is never used for data. Worse yet, if the skb's data area has been realigned indeed, then data beyond the end of the buffer will be synchronised from the receive DMA bounce buffer, possibly corrupting data structures residing in memory beyond the actual end of this data buffer. Therefore switch to using PI_RCV_DATA_K_SIZE_MAX rather than NEW_SKB_SIZE in DMA mapping, the value the former macro expands to is written to the receive ring DMA descriptor of the PDQ DMA chip and determines the maximum amount of data PDQ will ever transfer to the corresponding data buffer, including all headers and padding. Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02defxx: Fix !DYNAMIC_BUFFERS compilation warningsMaciej W. Rozycki
This fixes compilation warnings: drivers/net/fddi/defxx.c:294: warning: 'dfx_rcv_flush' declared inline after being called drivers/net/fddi/defxx.c:294: warning: previous declaration of 'dfx_rcv_flush' was here drivers/net/fddi/defxx.c:2854: warning: 'my_skb_align' defined but not used triggered when the driver is built with DYNAMIC_BUFFERS undefined. Code tested to work just fine with these changes and a few DEFPA and DEFTA boards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02defxx: Remove an incorrectly inverted preprocessor conditionalMaciej W. Rozycki
The RX handler of the driver has two paths switched between, depending on the size of the frame received, as determined by SKBUFF_RX_COPYBREAK. When a small frame is received, a new skb allocated has data space large enough to hold the incoming frame only, and data is copied there from the original skb whose buffer is returned to the DMA RX ring; in that case `rx_in_place' is 0. When a large frame is received, a new skb allocated has data space large enough to hold the largest frame possible, including the overhead for alignment, the receive status and padding, over 4.5kiB overall, and its buffer is placed on the DMA RX ring while the original buffer is passed up to the network stack avoiding the need to copy data; in that case `rx_in_place' is 1. However the latter scenario is only possible when dynamic buffers are used, as determined by DYNAMIC_BUFFERS, because otherwise the buffers used for the DMA RX ring are fixed at the time the interface is brought up. That leads to an observation that the preprocessor conditional around the `rx_in_place' check is inverted, the check only really matters when dynamic buffers are in use. It has gone unnoticed for many years since support for using dynamic buffers on the DMA RX ring was introduced in 2.1.40 -- because the only problem that results is in the case where `rx_in_place' is 1 frame data received is unnecessarily copied to the newly-allocated buffer, before the buffer placed on the the DMA receive RX and its contents ignored. Therefore the only symptom is some performance loss. Rather than flipping the condition though I decided to discard the conditional altogether -- in the case of static buffers `rx_in_place' is always 0 so GCC will optimise the C conditional away instead. Tested on a few DEFPA and DEFTA boards successfully using both small and large frames, both with DYNAMIC_BUFFERS defined and with the macro undefined. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31net: fddi: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-16fddi: cleanup unsigned to unsigned int/shorttanxiaojun
Use "unsigned int/short" instead of "unsigned", and change the type of iteration variable "i" to "unsigned int". Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: fddi: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net/fddi: Replace local macro with PCI standard macroYijing Wang
Replace local macro DFX_BUS_PCI() with PCI standard macro dev_is_pci(). Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24fddi/skfp: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
2013-08-29drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherentJoe Perches
__GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net/fddi/skfp/skfddi: Use module_pci_driver to register driverPeter Hüwe
Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03fddi: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-01fddi: 64 bit bug in smt_add_para()Dan Carpenter
The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-06-06drivers: net: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-27skfp: Fix SysKonnect FDDI driver compile issuesJeff Kirsher
After moving the skfp driver, issues with the #include pathing to their locel headers was somehow exposed. Several headers had the incorrect path, so they were not able to be found during compile time. This patch fixes up the path issues to the local headers that need to be included. CC: "Maciej W. Rozycki" <macro@linux-mips.org> CC: Christoph Goos <cgoos@syskonnect.de> CC: <linux@syskonnect.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-27fddi: Move the FDDI driversJeff Kirsher
Move the FDDI drivers into drivers/net/fddi/ and make the necessary Kconfig and Makefile changes. CC: "Maciej W. Rozycki" <macro@linux-mips.org> CC: Christoph Goos <cgoos@syskonnect.de> CC: <linux@syskonnect.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>