summaryrefslogtreecommitdiff
path: root/drivers/net/geneve.c
AgeCommit message (Collapse)Author
2024-03-04geneve: make sure to pull inner header in geneve_rx()Eric Dumazet
syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05geneve: use DEV_STATS_INC()Eric Dumazet
geneve updates dev->stats fields locklessly. Adopt DEV_STATS_INC() to avoid races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240104163633.2070538-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23geneve: use generic function for tunnel IPv6 route lookupBeniamino Galvani
The route lookup can be done now via generic function udp_tunnel6_dst_lookup() to replace the custom implementation in geneve_get_v6_dst(). This is similar to what already done for IPv4 in commit daa2ba7ed1d1 ("geneve: use generic function for tunnel IPv4 route lookup"). Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-16geneve: use generic function for tunnel IPv4 route lookupBeniamino Galvani
The route lookup can be done now via generic function udp_tunnel_dst_lookup() to replace the custom implementation in geneve_get_v4_rt(). Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-16geneve: add dsfield helper functionBeniamino Galvani
Add a helper function to compute the tos/dsfield. In this way, we can factor out some duplicate code. Also, the helper will be called from more places in the next commit. Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-21net: geneve: accept every ethertypeJosef Miegl
The Geneve encapsulation, as defined in RFC 8926, has a Protocol Type field, which states the Ethertype of the payload appearing after the Geneve header. Commit 435fe1c0c1f7 ("net: geneve: support IPv4/IPv6 as inner protocol") introduced a new IFLA_GENEVE_INNER_PROTO_INHERIT flag that allowed the use of other Ethertypes than Ethernet. However, it did not get rid of a restriction that prohibits receiving payloads other than Ethernet, instead the commit white-listed additional Ethertypes, IPv4 and IPv6. This patch removes this restriction, making it possible to receive any Ethertype as a payload, if the IFLA_GENEVE_INNER_PROTO_INHERIT flag is set. The restriction was set in place back in commit 0b5e8b8eeae4 ("net: Add Geneve tunneling protocol driver"), which implemented a protocol layer driver for Geneve to be used with Open vSwitch. The relevant discussion about introducing the Ethertype white-list can be found here: https://lore.kernel.org/netdev/CAEP_g=_1q3ACX5NTHxLDnysL+dTMUVzdLpgw1apLKEdDSWPztw@mail.gmail.com/ <quote> >> + if (unlikely(geneveh->proto_type != htons(ETH_P_TEB))) > > Why? I thought the point of geneve carrying protocol field was to > allow protocols other than Ethernet... is this temporary maybe? Yes, it is temporary. Currently OVS only handles Ethernet packets but this restriction can be lifted once we have a consumer that is capable of handling other protocols. </quote> This white-list was then ported to a generic Geneve netdevice in commit 371bd1061d29 ("geneve: Consolidate Geneve functionality in single module."). Preserving the Ethertype white-list at this point made sense, as the Geneve device could send out only Ethernet payloads anyways. However, now that the Geneve netdevice supports encapsulating other payloads with IFLA_GENEVE_INNER_PROTO_INHERIT and we have a consumer capable of other protocols, it seems appropriate to lift the restriction and allow any Geneve payload to be received. Signed-off-by: Josef Miegl <josef@miegl.cz> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20230319220954.21834-1-josef@miegl.cz Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-15net: geneve: set IFF_POINTOPOINT with IFLA_GENEVE_INNER_PROTO_INHERITJosef Miegl
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is point-to-point, so set IFF_POINTOPOINT to reflect that. Signed-off-by: Josef Miegl <josef@miegl.cz> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-31rtnetlink: pass netlink message header and portid to rtnl_configure_link()Hangbin Liu
This patch pass netlink message header and portid to rtnl_configure_link() All the functions in this call chain need to add the parameters so we can use them in the last call rtnl_notify(), and notify the userspace about the new link info if NLM_F_ECHO flag is set. - rtnl_configure_link() - __dev_notify_flags() - rtmsg_ifinfo() - rtmsg_ifinfo_event() - rtmsg_ifinfo_build_skb() - rtmsg_ifinfo_send() - rtnl_notify() Also move __dev_notify_flags() declaration to net/core/dev.h, as Jakub suggested. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: gro: skb_gro_header helper functionRichard Gobert
Introduce a simple helper function to replace a common pattern. When accessing the GRO header, we fetch the pointer from frag0, then test its validity and fetch it from the skb when necessary. This leads to the pattern skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow recurring many times throughout GRO code. This patch replaces these patterns with a single inlined function call, improving code readability. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220823071034.GA56142@debian Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-09geneve: do not use RT_TOS for IPv6 flowlabelMatthias May
According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-09geneve: fix TOS inheriting for ipv4Matthias May
The current code retrieves the TOS field after the lookup on the ipv4 routing table. The routing process currently only allows routing based on the original 3 TOS bits, and not on the full 6 DSCP bits. As a result the retrieved TOS is cut to the 3 bits. However for inheriting purposes the full 6 bits should be used. Extract the full 6 bits before the route lookup and use that instead of the cut off 3 TOS bits. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") Signed-off-by: Matthias May <matthias.may@westermo.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26geneve: Use ip_tunnel_key flow flags in route lookupsPaul Chaignon
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in the subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
2022-04-15geneve: avoid indirect calls in GRO path, when possiblePaolo Abeni
In the most common setups, the geneve tunnels use an inner ethernet encapsulation. In the GRO path, when such condition is true, we can call directly the relevant GRO helper and avoid a few indirect calls. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-22net: geneve: add missing netlink policy and size for ↵Eyal Birger
IFLA_GENEVE_INNER_PROTO_INHERIT Add missing netlink attribute policy and size calculation. Also enable strict validation from this new attribute onwards. Fixes: 435fe1c0c1f7 ("net: geneve: support IPv4/IPv6 as inner protocol") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20220322043954.3042468-1-eyal.birger@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: geneve: support IPv4/IPv6 as inner protocolEyal Birger
This patch adds support for encapsulating IPv4/IPv6 within GENEVE. In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs to be provided at device creation. This property cannot be changed for the time being. In case IP traffic is received on a non-tun device the drop count is increased. Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-02-14net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior
Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-24gro: remove rcu_read_lock/rcu_read_unlock from gro_complete handlersEric Dumazet
All gro_complete() handlers are called from napi_gro_complete() while rcu_read_lock() has been called. There is no point stacking more rcu_read_lock() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24gro: remove rcu_read_lock/rcu_read_unlock from gro_receive handlersEric Dumazet
All gro_receive() handlers are called from dev_gro_receive() while rcu_read_lock() has been called. There is no point stacking more rcu_read_lock() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16net: move gro definitions to include/net/gro.hEric Dumazet
include/linux/netdevice.h became too big, move gro stuff into include/net/gro.h Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-04-23net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skbPhillip Potter
Modify the header size check in geneve6_xmit_skb and geneve_xmit_skb to use pskb_inet_may_pull rather than pskb_network_may_pull. This fixes two kernel selftest failures introduced by the commit introducing the checks: IPv4 over geneve6: PMTU exceptions IPv4 over geneve6: PMTU exceptions - nexthop objects It does this by correctly accounting for the fact that IPv4 packets may transit over geneve IPv6 tunnels (and vice versa), and still fixes the uninit-value bug fixed by the original commit. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 6628ddfec758 ("net: geneve: check skb is large enough for IPv4/IPv6 header") Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-11net: geneve: check skb is large enough for IPv4/IPv6 headerPhillip Potter
Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure is large enough to include IPv4 or IPv6 header, and reject if not. The geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-03-30geneve: allow UDP L4 GRO passthrouPaolo Abeni
Similar to the previous commit, let even geneve passthrou the L4 GRO packets Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25geneve: do not modify the shared tunnel info when PMTU triggers an ICMP replyAntoine Tenart
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: c1a800e88dbf ("geneve: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-18geneve: add NETIF_F_FRAGLIST flag for dev featuresXin Long
Some protocol HW GSO requires fraglist supported by the device, like SCTP. Without NETIF_F_FRAGLIST set in the dev features of geneve, it would have to do SW GSO before the packets enter the driver, even when the geneve dev and lower dev (like veth) both have the feature of NETIF_F_GSO_SCTP. So this patch is to add it for geneve. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07udp_tunnel: remove REGISTER/UNREGISTER handling from tunnel driversJakub Kicinski
udp_tunnel_nic handles REGISTER and UNREGISTER event, now that all drivers use that infra we can drop the event handling in the tunnel drivers. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09Revert "geneve: pull IP header before ECN decapsulation"Jakub Kicinski
This reverts commit 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation"). Eric says: "network header should have been pulled already before hitting geneve_rx()". Let's revert the syzbot fix since it's causing more harm than good, and revisit. Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation") Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569 Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01geneve: pull IP header before ECN decapsulationEric Dumazet
IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume IP header is already pulled. geneve does not ensure this yet. Fixing this generically in IP_ECN_decapsulate() and IP6_ECN_decapsulate() is not possible, since callers pass a pointer that might be freed by pskb_may_pull() syzbot reported : BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197 __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306 geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377 udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093 udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167 udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline] __udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394 udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564 ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:449 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core net/core/dev.c:5315 [inline] __netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429 process_backlog+0x523/0xc10 net/core/dev.c:6319 napi_poll+0x420/0x1010 net/core/dev.c:6763 net_rx_action+0x35c/0xd40 net/core/dev.c:6833 __do_softirq+0x1a9/0x6fa kernel/softirq.c:298 asm_call_irq_on_stack+0xf/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77 do_softirq kernel/softirq.c:343 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline] __dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173 packet_snd net/packet/af_packet.c:2992 [inline] packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] __sys_sendto+0x9dc/0xc80 net/socket.c:1992 __do_sys_sendto net/socket.c:2004 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2000 __x64_sys_sendto+0x6e/0x90 net/socket.c:2000 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20201201090507.4137906-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13ip_tunnels: Set tunnel option flag when tunnel metadata is presentYi-Hung Wei
Currently, we may set the tunnel option flag when the size of metadata is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function no matter the geneve option is present or not. As this may result in issues on the tunnel flags consumers, this patch fixes the issue. Related discussion: * https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u Fixes: 256c87c17c53 ("net: check tunnel option type in tunnel flags") Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09net: switch to dev_get_tstats64Heiner Kallweit
Replace ip_tunnel_get_stats64() with the new identical core function dev_get_tstats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06geneve: use dev_sw_netstats_rx_add()Fabian Frederick
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16geneve: add transport ports in route lookup for geneveMark Gray
This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels. This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal: $ cat /etc/ipsec.conf conn in ... left=$IP1 right=$IP2 ... leftprotoport=udp/6081 rightprotoport=udp ... conn out ... left=$IP1 right=$IP2 ... leftprotoport=udp rightprotoport=udp/6081 ... The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses): $ ip link add tun type geneve id 1000 remote $IP2 $ ip addr add 192.168.0.1/24 dev tun $ ip link set tun up This can then be tested by pinging from $IP1: $ ping 192.168.0.2 Without this patch the traffic is unencrypted on the wire. Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com> Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04geneve: Support for PMTU discovery on directly bridged linksStefano Brivio
If the interface is a bridge or Open vSwitch port, and we can't forward a packet because it exceeds the local PMTU estimate, trigger an ICMP or ICMPv6 reply to the sender, using the same interface to forward it back. If metadata collection is enabled, set destination and source addresses for the flow as if we were receiving the packet, so that Open vSwitch can match the ICMP error against the existing association. v2: Use netif_is_any_bridge_port() (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04tunnels: PMTU discovery support for directly bridged IP packetsStefano Brivio
It's currently possible to bridge Ethernet tunnels carrying IP packets directly to external interfaces without assigning them addresses and routes on the bridged network itself: this is the case for UDP tunnels bridged with a standard bridge or by Open vSwitch. PMTU discovery is currently broken with those configurations, because the encapsulation effectively decreases the MTU of the link, and while we are able to account for this using PMTU discovery on the lower layer, we don't have a way to relay ICMP or ICMPv6 messages needed by the sender, because we don't have valid routes to it. On the other hand, as a tunnel endpoint, we can't fragment packets as a general approach: this is for instance clearly forbidden for VXLAN by RFC 7348, section 4.3: VTEPs MUST NOT fragment VXLAN packets. Intermediate routers may fragment encapsulated VXLAN packets due to the larger frame size. The destination VTEP MAY silently discard such VXLAN fragments. The same paragraph recommends that the MTU over the physical network accomodates for encapsulations, but this isn't a practical option for complex topologies, especially for typical Open vSwitch use cases. Further, it states that: Other techniques like Path MTU discovery (see [RFC1191] and [RFC1981]) MAY be used to address this requirement as well. Now, PMTU discovery already works for routed interfaces, we get route exceptions created by the encapsulation device as they receive ICMP Fragmentation Needed and ICMPv6 Packet Too Big messages, and we already rebuild those messages with the appropriate MTU and route them back to the sender. Add the missing bits for bridged cases: - checks in skb_tunnel_check_pmtu() to understand if it's appropriate to trigger a reply according to RFC 1122 section 3.2.2 for ICMP and RFC 4443 section 2.4 for ICMPv6. This function is already called by UDP tunnels - a new function generating those ICMP or ICMPv6 replies. We can't reuse icmp_send() and icmp6_send() as we don't see the sender as a valid destination. This doesn't need to be generic, as we don't cover any other type of ICMP errors given that we only provide an encapsulation function to the sender While at it, make the MTU check in skb_tunnel_check_pmtu() accurate: we might receive GSO buffers here, and the passed headroom already includes the inner MAC length, so we don't have to account for it a second time (that would imply three MAC headers on the wire, but there are just two). This issue became visible while bridging IPv6 packets with 4500 bytes of payload over GENEVE using IPv4 with a PMTU of 4000. Given the 50 bytes of encapsulation headroom, we would advertise MTU as 3950, and we would reject fragmented IPv6 datagrams of 3958 bytes size on the wire. We're exclusively dealing with network MTU here, though, so we could get Ethernet frames up to 3964 octets in that case. v2: - moved skb_tunnel_check_pmtu() to ip_tunnel_core.c (David Ahern) - split IPv4/IPv6 functions (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23geneve: fix an uninitialized value in geneve_changelink()Cong Wang
geneve_nl2info() sets 'df' conditionally, so we have to initialize it by copying the value from existing geneve device in geneve_changelink(). Fixes: 56c09de347e4 ("geneve: allow changing DF behavior after creation") Reported-by: syzbot+7ebc2e088af5e4c0c9fa@syzkaller.appspotmail.com Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10udp_tunnel: add central NIC RX port offload infrastructureJakub Kicinski
Cater to devices which: (a) may want to sleep in the callbacks; (b) only have IPv4 support; (c) need all the programming to happen while the netdev is up. Drivers attach UDP tunnel offload info struct to their netdevs, where they declare how many UDP ports of various tunnel types they support. Core takes care of tracking which ports to offload. Use a fixed-size array since this matches what almost all drivers do, and avoids a complexity and uncertainty around memory allocations in an atomic context. Make sure that tunnel drivers don't try to replay the ports when new NIC netdev is registered. Automatic replays would mess up reference counting, and will be removed completely once all drivers are converted. v4: - use a #define NULL to avoid build issues with CONFIG_INET=n. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06geneve: move all configuration under struct geneve_configSabrina Dubroca
This patch adds a new structure geneve_config and moves the per-device configuration attributes to it, like we already have in VXLAN with struct vxlan_config. This ends up being pretty invasive since those attributes are used everywhere. This allows us to clean up the argument lists for geneve_configure (4 arguments instead of 8) and geneve_nl2info (5 instead of 9). This also reduces the copy-paste of code setting those attributes between geneve_configure and geneve_changelink to a single memcpy, which would have avoided the bug fixed in commit 56c09de347e4 ("geneve: allow changing DF behavior after creation"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19geneve: allow changing DF behavior after creationSabrina Dubroca
Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-04geneve: change from tx_error to tx_dropped on missing metadataJiri Benc
If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected. However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping. The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none. Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23geneve: use the correct nlattr array in NL_SET_ERR_MSG_ATTRSabrina Dubroca
IFLA_GENEVE_* attributes are in the data array, which is correctly used when fetching the value, but not when setting the extended ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds array accesses, but we don't provide a pointer to the invalid attribute to userspace. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15geneve: move debug check after netdev unregisterFlorian Westphal
The debug check must be done after unregister_netdevice_many() call -- the list_del() for this is done inside .ndo_stop. Fixes: 2843a25348f8 ("geneve: speedup geneve tunnels dismantle") Reported-and-tested-by: <syzbot+68a8ed58e3d17c700de5@syzkaller.appspotmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
generated by cgit (git 2.34.1) at 2024-05-22 15:21:32 +0000