summaryrefslogtreecommitdiff
path: root/drivers/net/gtp.c
AgeCommit message (Collapse)Author
2020-05-01gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()Yoshiyuki Kurauchi
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13gtp: use icmp_ndo_send helperJason A. Donenfeld
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04gtp: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo
gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23gtp: make sure only SOCK_DGRAM UDP sockets are acceptedEric Dumazet
A malicious user could use RAW sockets and fool GTP using them as standard SOCK_DGRAM UDP sockets. BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827 gtp_encap_enable drivers/net/gtp.c:844 [inline] gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666 __rtnl_newlink net/core/rtnetlink.c:3305 [inline] rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441359 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline] kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207 alloc_pages include/linux/gfp.h:534 [inline] alloc_slab_page+0x111/0x12f0 mm/slub.c:1511 allocate_slab mm/slub.c:1656 [inline] new_slab+0x2bc/0x1130 mm/slub.c:1722 new_slab_objects mm/slub.c:2473 [inline] ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624 __slab_alloc mm/slub.c:2664 [inline] slab_alloc_node mm/slub.c:2738 [inline] slab_alloc mm/slub.c:2783 [inline] kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321 __sock_create+0x8eb/0xf00 net/socket.c:1420 sock_create net/socket.c:1471 [inline] __sys_socket+0x1a1/0x600 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket+0x8d/0xb0 net/socket.c:1520 __x64_sys_socket+0x4a/0x70 net/socket.c:1520 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pablo Neira <pablo@netfilter.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08gtp: fix bad unlock balance in gtp_encap_enable_socketEric Dumazet
WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06gtp: simplify error handling code in 'gtp_encap_enable()'Christophe JAILLET
'gtp_encap_disable_sock(sk)' handles the case where sk is NULL, so there is no need to test it before calling the function. This saves a few line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24gtp: do not confirm neighbor when do pmtu updateHangbin Liu
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not call dst_confirm_neigh(), we still set it to false to keep consistency with IPv6 code. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-14gtp: avoid zero size hashtableTaehee Yoo
GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-14gtp: fix an use-after-free in ipv4_pdp_find()Taehee Yoo
ipv4_pdp_find() is called in TX packet path of GTP. ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context. In the current code, gtp->tid_hash and gtp->addr_hash are freed by ->dellink(), which is gtp_dellink(). But gtp_dellink() would be called while packets are processing. So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash. Instead, dev->priv_destructor() would be used because this callback is called after all packet processing safely. Test commands: ip link add veth1 type veth peer name veth2 ip a a 172.0.0.1/24 dev veth1 ip link set veth1 up ip a a 172.99.0.1/32 dev lo gtp-link add gtp1 & gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2 ip r a 172.99.0.2/32 dev gtp1 ip link set gtp1 mtu 1500 ip netns add ns2 ip link set veth2 netns ns2 ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2 ip netns exec ns2 ip link set veth2 up ip netns exec ns2 ip a a 172.99.0.2/32 dev lo ip netns exec ns2 ip link set lo up ip netns exec ns2 gtp-link add gtp2 & ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1 ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2 ip netns exec ns2 ip link set gtp2 mtu 1500 hping3 172.99.0.2 -2 --flood & ip link del gtp1 Splat looks like: [ 72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195 [ 72.569631][ T1195] [ 72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199 [ 72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 72.571438][ T1195] Call Trace: [ 72.571764][ T1195] dump_stack+0x96/0xdb [ 72.572171][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.572761][ T1195] print_address_description.constprop.5+0x1be/0x360 [ 72.573400][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.573971][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.574544][ T1195] __kasan_report+0x12a/0x16f [ 72.575014][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.575593][ T1195] kasan_report+0xe/0x20 [ 72.576004][ T1195] ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.576577][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ ... ] [ 72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28 [ 72.648512][ T1195] #PF: supervisor read access in kernel mode [ 72.649158][ T1195] #PF: error_code(0x0000) - not-present page [ 72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060 [ 72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G B 5.5.0-rc1 #199 [ 72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp] [ ... ] [ 72.679168][ T1195] Call Trace: [ 72.679603][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ 72.681915][ T1195] ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp] [ 72.682513][ T1195] ? lock_acquire+0x164/0x3b0 [ 72.682966][ T1195] ? gtp_dev_xmit+0x35e/0x890 [gtp] [ 72.683481][ T1195] gtp_dev_xmit+0x3c2/0x890 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-14gtp: fix wrong condition in gtp_genl_dump_pdp()Taehee Yoo
gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size. If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer. Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found. In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp(). Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-14gtp: do not allow adding duplicate tid and ms_addr pdp contextTaehee Yoo
GTP RX packet path lookups pdp context with TID. If duplicate TID pdp contexts are existing in the list, it couldn't select correct pdp context. So, TID value should be unique. GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp contexts are existing in the list, it couldn't select correct pdp context. So, ms_addr value should be unique. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-07-07gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()Taehee Yoo
If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_newlink()Taehee Yoo
Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix Illegal context switch in RCU read-side critical section.Taehee Yoo
ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: remove duplicate code in gtp_dellink()Taehee Yoo
gtp_encap_disable() in gtp_dellink() is unnecessary because it will be called by unregister_netdevice(). unregister_netdevice() internally calls gtp_dev_uninit() by ->ndo_uninit(). And gtp_dev_uninit() calls gtp_encap_disable(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_encap_destroy()Taehee Yoo
gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix suspicious RCU usageTaehee Yoo
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20gtp: constify nla_policyStephen Hemminger
The netlink policy structure can be constant like other drivers. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-01gtp: Initialize 64-bit per-cpu stats correctlyFlorian Fainelli
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that by using netdev_alloc_pcpu_stats() instead of an open coded allocation. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net: fix potential null pointer dereferenceGustavo A. R. Silva
Add null check to avoid a potential null pointer dereference. Addresses-Coverity-ID: 1408831 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-25gtp: support SGSN-side tunnelsJonas Bonn
The GTP-tunnel driver is explicitly GGSN-side as it searches for PDP contexts based on the incoming packets _destination_ address. If we want to place ourselves on the SGSN side of the tunnel, then we want to be identifying PDP contexts based on _source_ address. Let it be noted that in a "real" configuration this module would never be used: the SGSN normally does not see IP packets as input. The justification for this functionality is for PGW load-testing applications where the input to the SGSN is locally generally IP traffic. This patch adds a "role" argument at GTP-link creation time to specify whether we are on the GGSN or SGSN side of the tunnel; this flag is then used to determine which part of the IP packet to use in determining the PDP context. Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-25gtp: rename SGSN netlink attributeJonas Bonn
This is a mostly cosmetic rename of the SGSN netlink attribute to the GTP link. The justification for this is that we will be making the module support decapsulation of "downstream" SGSN packets, in which case the netlink parameter actually refers to the upstream GGSN peer. Renaming the parameter makes the relationship clearer. The legacy name is maintained as a define in the header file in order to not break existing code. Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: add socket to pdp contextAndreas Schultz
Having the socket present in context simplifies the sending logic. It also fixes the invalid assumption that we have to use the same sending socket for all client IP's on a specific gtp interface. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: consolidate pdp context destruction into helperAndreas Schultz
Consolidate duplicate code into helper. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: unify genl_find_pdp and prepare for per socket lookupAndreas Schultz
This unifies duplicate code into a helper. It also prepares the groundwork to add a lookup version that uses the socket to find attached pdp contexts. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: consolidate gtp socket rx pathAndreas Schultz
Add network device to gtp context in preparation for splitting the TEID from the network device. Use this to rework the socker rx path. Move the common RX part of v0 and v1 into a helper. Also move the final rx part into that helper as well. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: merge gtp_get_net and gtp_genl_find_devAndreas Schultz
Both function are always used together with the final goal to get the gtp_dev. This simplifies the code by merging them together. The netdevice lookup is changed to use the regular dev_get_by_index. The gtp netdevice list is now only used to find the PDP contexts for imcomming packets. It can be completely eliminated Once the TEID hash is moved into the GTP socket. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: make GTP sockets in gtp_newlink optionalAndreas Schultz
Having both GTPv0-U and GTPv1-U is not always desirable. Fallback from GTPv1-U to GTPv0-U was depreciated from 3GPP Rel-8 onwards. Post Rel-8 implementation are discuraged from listening on the v0 port (see 3GPP TS 29.281, Sect. 1). A future change will completely decouple the sockets from the network device. Till then, at least one of the sockets needs to be specified (either v0 or v1), the other is optional. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: switch from struct socket to struct sock for the GTP socketsAndreas Schultz
After enabling the UDP encapsulation, only the sk member is used. Holding the socket would prevent user space from closing the socket, but holding a reference to the sk member does not have the same effect. This change will make it simpler to later detach the sockets from the netdevice. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-29gtp: let userspace handle packets for invalid tunnelsAndreas Schultz
enable userspace to send error replies for invalid tunnels Acked-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29gtp: remove unnecessary rcu_read_lockAndreas Schultz
The rcu read lock is hold by default in the ip input path. There is no need to hold it twice in the socket recv decapsulate code path. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: fix cross netns recv on gtp socketAndreas Schultz
The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation). Remove the now obsolete net field from gtp_dev. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: clear DF bit on GTP packet txAndreas Schultz
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2: > Backbone router: Any router in the backbone may fragment the GTP > packet if needed, according to IPv4. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27gtp: add genl family modules aliasAndreas Schultz
Auto-load the module when userspace asks for the gtp netlink family. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17gtp: Fix initialization of Flags octet in GTPv1 headerHarald Welte
When generating a GTPv1 header in gtp1_push_header(), initialize the 'reserved' bit to zero. All 3GPP specifications for GTPv1 from Release 99 through Release 13 agree that a transmitter shall set this bit to zero, see e.g. Note 0 of Figure 2 in Section 6 of 3GPP TS 29.060 v13.5.0 Release 13, available from http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.05.00_60/ts_129060v130500p.pdf Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17gtp: gtp_check_src_ms_ipv4() always return successLionel Gauthier
gtp_check_src_ms_ipv4() did not find the PDP context matching with the UE IP address because the memory location is not right, but the result is inverted by the Boolean "not" operator. So whatever is the PDP context, any call to this function is successful. Signed-off-by: Lionel Gauthier <Lionel.Gauthier@eurecom.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>