| Age | Commit message (Collapse) | Author |
|---|
|
Calling ipa_cmd_pipeline_clear() after stopping the channel
underlying the AP<-modem RX endpoint can lead to a deadlock.
This occurs in the ->runtime_suspend device power operation for the
IPA driver. While this callback is in progress, any other requests
for power will block until the callback returns.
Stopping the AP<-modem RX channel does not prevent the modem from
sending another packet to this endpoint. If a packet arrives for an
RX channel when the channel is stopped, an SUSPEND IPA interrupt
condition will be pending. Handling an IPA interrupt requires
power, so ipa_isr_thread() calls pm_runtime_get_sync() first thing.
The problem occurs because a "pipeline clear" command will not
complete while such a SUSPEND interrupt condition exists. So the
SUSPEND IPA interrupt handler won't proceed until it gets power;
that won't happen until the ->runtime_suspend callback (and its
"pipeline clear" command) completes; and that can't happen while
the SUSPEND interrupt condition exists.
It turns out that in this case there is no need to use the "pipeline
clear" command. There are scenarios in which clearing the pipeline
is required while suspending, but those are not (yet) supported
upstream. So a simple fix, avoiding the potential deadlock, is to
stop calling ipa_cmd_pipeline_clear() in ipa_endpoint_suspend().
This removes the only user of ipa_cmd_pipeline_clear(), so get rid
of that function. It can be restored again whenever it's needed.
This is basically a manual revert along with an explanation for
commit 6cb63ea6a39ea ("net: ipa: introduce ipa_cmd_tag_process()").
Fixes: 6cb63ea6a39ea ("net: ipa: introduce ipa_cmd_tag_process()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I've added commented assertions to record certain properties that
can be assumed to hold in certain places in the IPA code. Convert
these into real WARN_ON() calls so the assertions are actually
checked, using the standard WARN_ON() mechanism.
Where errors can be returned, return an error if a warning is
triggered.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are only a few remaining spots that validate IPA code
conditional on whether a symbol is defined at compile time.
The checks are not expensive, so just build them always.
This completes the removal of all CONFIG_VALIDATE/CONFIG_VALIDATION
IPA code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stop supporting different sizes for hashed and non-hashed filter or
route tables. Add BUILD_BUG_ON() calls to verify the sizes of the
fields in the filter/route table initialization immediate command
are the same.
Add a check to ipa_cmd_table_valid() to ensure the size of the
memory region being checked fits within the immediate command field
that must hold it.
Remove two Boolean parameters used only for error reporting. This
actually fixes a bug that would only show up if IPA_VALIDATE were
defined. Define ipa_cmd_table_valid() unconditionally (no longer
dependent on IPA_VALIDATE).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new function that abstracts finding information about a
region in IPA-local memory, given its memory region ID. For now it
simply uses the region ID as an index into the IPA memory array.
If the region is not defined, ipa_mem_find() returns a null pointer.
Update all code that accesses the ipa->mem[] array directly to use
ipa_mem_find() instead. The return value must be checked for null
when optional memory regions are sought.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do some general cleanup in ipa_cmd_header_valid():
- Delay assigning the mem variable until just before it's used.
- Assign the maximum offset and size values together.
- Improve comments explaining the single range of memory being
made up of a modem portion and an AP portion.
- Record the offset of the combined range in a local variable.
- Do the initial size assignment right after assigning the offset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Entries in an IPA route or filter table are 64-bit little-endian
addresses, each of which refers to a routing or filtering rule.
The format of these table slots are fixed, but IPA_TABLE_ENTRY_SIZE
is used to define their size. This symbol doesn't really add value,
and I think it unnecessarily obscures what a table entry *is*.
So get rid of IPA_TABLE_ENTRY_SIZE, and just use sizeof(__le64) in
its place throughout the code.
Update the comments in "ipa_table.c" to provide a little better
explanation of these table slots.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify conditional tests throughout the IPA code so they do not
assume that IPA v3.5.1 is the oldest version supported. Also remove
assumptions that IPA v4.5 is the newest version of IPA supported.
Augment versions in comments with "+", to be clearer that the
comment applies to a version and subsequent versions. (E.g.,
"present for IPA v4.2+" instead of just "present for v4.2".)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them. This way we avoid having to check for errors
when we actually program the hardware.
Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.
There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it. Add this missing check.
Rearrange the way we ensure the header table fits in overall IPA
memory range.
Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new function to abstract the knowledge of whether hashed
routing and filter tables are supported for a given IPA instance.
IPA v4.2 is the only one that doesn't support hashed tables (now
and for the foreseeable future), but the name of the helper function
is better for explaining what's going on.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ipa_cmd_register_write_valid() we verify that values we will
supply to a REGISTER_WRITE IPA immediate command will fit in
the fields that need to hold them. This patch fixes some issues
in that function and ipa_cmd_register_write_offset_valid().
The dev_err() call in ipa_cmd_register_write_offset_valid() has
some printf format errors:
- The name of the register (corresponding to the string format
specifier) was not supplied.
- The IPA base offset and offset need to be supplied separately to
match the other format specifiers.
Also make the ~0 constant used there to compute the maximum
supported offset value explicitly unsigned.
There are two other issues in ipa_cmd_register_write_valid():
- There's no need to check the hash flush register for platforms
(like IPA v4.2) that do not support hashed tables
- The highest possible endpoint number, whose status register
offset is computed, is COUNT - 1, not COUNT.
Fix these problems, and add some additional commentary.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only time we transfer data (rather than issuing a command) out
of the AP->command TX endpoint is when we're clearing the hardware
pipeline. All that's needed is a "small" data buffer, and its
contents aren't even important.
For convenience, we just transfer a command structure in this case
(it's already mapped for DMA). The TRE is added to a transaction
using ipa_cmd_ip_tag_status_add(), but we ignore the size value
provided to that function. So just get rid of the size argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We only send a tagged packet from the AP->command TX endpoint when
we're clearing the hardware pipeline. And when we receive the
tagged packet we don't care what the actual tag value is.
Stop passing a tag value to ipa_cmd_ip_tag_status_add(), and just
encode 0 as the tag sent. Fix the function that encodes the tag so
it uses the proper byte ordering.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are times, such as when the modem crashes, when we issue
commands to clear the IPA hardware pipeline. These commands include
a data transfer command that delivers a small packet directly to the
default (AP<-LAN RX) endpoint.
The places that do this wait for the transactions that contain these
commands to complete, but the pipeline can't be assumed clear until
the sent packet has been *received*.
The small transfer will be delivered with a status structure, and
that status will indicate its tag is valid. This is the only place
we send a tagged packet, so we use the tag to determine when the
pipeline clear packet has arrived.
Add a completion to the IPA structure to to be used to signal
the receipt of a pipeline clear packet. Create a new function
ipa_cmd_pipeline_clear_wait() that will wait for that completion.
Reinitialize the completion whenever pipeline clear commands are
added to a transaction. Extend ipa_endpoint_status_tag() to check
whether a packet whose status contains a valid tag was sent from the
AP->command TX endpoint, and if so, signal the new IPA completion.
Have all callers of ipa_cmd_pipeline_clear_add() wait for the
pipeline clear indication after the transaction that clears the
pipeline has completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a set of functions and symbols related to performing
"tag_process" immediate commands to clear the IPA pipeline. The
name is related to one of the commands issued when doing this, but
it doesn't really convey the overall purpose of taking this action.
The purpose is to take some steps to "clear out" the hardware
pipeline, and to wait until that process completes, to ensure the
IPA hardware is in a well-defined state.
Rename these symbols to use "pipeline_clear" in their names instead.
Add some comments to explain a bit more about what's going on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consistently define numeric values for enumerated type members using
hexidecimal (rather than decimal) format values. Align the values
assigned in the same column in each file.
Only assign values where they really matter, for example don't
assign IPA_ENDPOINT_AP_MODEM_TX the value 0.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function ipa_cmd_tag_process() that simply allocates a
transaction, adds a tag process command to it to clear the hardware
pipeline, and commits the transaction.
Call it in from ipa_endpoint_suspend(), after suspending the modem
endpoints but before suspending the AP command TX and AP LAN RX
endpoints (which are used by the tag sequence).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One part of recovering from a modem crash is performing a "tag
sequence" of several IPA immediate commands, to clear the hardware
pipeline. The sequence ends with a data transfer request on the
command endpoint (which is not otherwise done). Unfortunately,
attempting to do the data transfer led to a hang, so that request
plus two other commands were commented out.
The previous commit fixes the bug that was causing that hang. And
with that bug fixed we can properly issue the tag sequence when the
modem crashes, to return the hardware to a known state.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent commit removed the only use of ipa_cmd_dma_task_32b_addr_add().
This function (and the IPA immediate command it implements) is no
longer needed, so get rid of it, along with all of the definitions
associated with it. Isolate its removal in a commit so it can be
easily added back again if needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One TX endpoint (per EE) is used for issuing immediate commands to
the IPA. These commands request activites beyond simple data
transfers to be done by the IPA hardware. For example, the IPA is
able to manage routing packets among endpoints, and immediate commands
are used to configure tables used for that routing.
Immediate commands are built on top of GSI transactions. They are
different from normal transfers (in that they use a special endpoint,
and their "payload" is interpreted differently), so separate functions
are used to issue immediate command transactions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
