| Age | Commit message (Collapse) | Author |
|---|
|
The IPA setup_complete flag is set at the end of ipa_setup(), when
the setup phase of initialization has completed successfully. This
occurs as part of driver probe processing, or (if "modem-init" is
specified in the DTS file) it is triggered by the "ipa-setup-ready"
SMP2P interrupt generated by the modem.
In the latter case, it's possible for driver shutdown (or remove) to
begin while setup processing is underway, and this can't be allowed.
The problem is that the setup_complete flag is not adequate to signal
that setup is underway.
If setup_complete is set, it will never be un-set, so that case is
not a problem. But if setup_complete is false, there's a chance
setup is underway.
Because setup is triggered by an interrupt on a "modem-init" system,
there is a simple way to ensure the value of setup_complete is safe
to read. The threaded handler--if it is executing--will complete as
part of a request to disable the "ipa-modem-ready" interrupt. This
means that ipa_setup() (which is called from the handler) will run
to completion if it was underway, or will never be called otherwise.
The request to disable the "ipa-setup-ready" interrupt is currently
made within ipa_modem_stop(). Instead, disable the interrupt
outside that function in the two places it's called. In the case of
ipa_remove(), this ensures the setup_complete flag is safe to read
before we read it.
Rename ipa_smp2p_disable() to be ipa_smp2p_irq_disable_setup(), to be
more specific about its effect.
Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently maintain a "disabled" Boolean flag to determine whether
the "ipa-setup-ready" SMP2P IRQ handler does anything. That flag
must be accessed under protection of a mutex.
Instead, disable the SMP2P interrupt when requested, which prevents
the interrupt handler from ever being called. More importantly, it
synchronizes a thread disabling the interrupt with the completion of
the interrupt handler in case they run concurrently.
Use the IPA setup_complete flag rather than the disabled flag in the
handler to determine whether to ignore any interrupts arriving after
the first.
Rename the "disabled" flag to be "setup_disabled", to be specific
about its purpose.
Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename a number of functions to clarify that there is no longer a
notion of an "IPA clock," but rather that the functions are more
generally related to IPA power management.
ipa_clock_enable() -> ipa_power_enable()
ipa_clock_disable() -> ipa_power_disable()
ipa_clock_rate() -> ipa_core_clock_rate()
ipa_clock_init() -> ipa_power_init()
ipa_clock_exit() -> ipa_power_exit()
Rename the ipa_clock structure to be ipa_power. Rename all
variables and fields using that structure type "power" rather
than "clock".
Rename the ipa_clock_data structure to be ipa_power_data, and more
broadly, just substitute "power" for "clock" in places that
previously represented things related to the "IPA clock".
Update comments throughout.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use runtime power management autosuspend.
Up until this point, we only suspended the IPA hardware for system
suspend; now we'll suspend it aggressively using runtime power
management, setting the initial autosuspend delay to half a second
of inactivity.
Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(),
call pm_runtime_mark_last_busy() before each of those. In places
where we're shutting things down, or decrementing power references
for errors, use pm_runtime_put_noidle() instead.
Finally, remove ipa_runtime_idle(), so the ->runtime_suspend
callback will occur if idle.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the "modem-init" Device Tree property is present for a platform,
the modem performs early IPA hardware initialization, and signals
this is complete with an "ipa-setup-ready" SMP2P interrupt. This
triggers a call to ipa_setup(), which requires the hardware to be
powered.
Replace the call to ipa_clock_get() in this case with a call to
pm_runtime_get_sync(). And replace the corresponding calls to
ipa_clock_put() with calls to pm_runtime_put() instead.
There is a chance we get an error when taking this power reference.
This is an unlikely scenario, where system suspend is initiated just
before the modem signals it has finished initializing the IPA
hardware. For now we'll just accept that this could occur, and
report it if it does.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that ipa_clock_get_additional() is a trivial wrapper around
pm_runtime_get_if_active(), just open-code it in its only caller
and delete the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently assume no errors occur when enabling or disabling the
IPA core clock and interconnects. And although this commit exposes
errors that could occur, we generally assume this won't happen in
practice.
This commit changes ipa_clock_get() and ipa_clock_put() so each
returns a value. The values returned are meant to mimic what the
runtime power management functions return, so we can set up error
handling here before we make the switch. Have ipa_clock_get()
increment the reference count even if it returns an error, to match
the behavior of pm_runtime_get().
More details follow.
When taking a reference in ipa_clock_get(), return 0 for the first
reference, 1 for subsequent references, or a negative error code if
an error occurs. Note that if ipa_clock_get() returns an error, we
must not touch hardware; in some cases such errors now cause entire
blocks of code to be skipped.
When dropping a reference in ipa_clock_put(), we return 0 or an
error code. The error would come from ipa_clock_disable(), which
now returns what ipa_interconnect_disable() returns (either 0 or a
negative error code). For now, callers ignore the return value;
if an error occurs, a message will have already been logged, and
little more can actually be done to improve the situation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two places call ipa_setup(). The first, ipa_probe(), holds an IPA
clock reference when calling ipa_setup() (if the AP is responsible
for IPA firmware loading). But if the modem is loading IPA
firmware, ipa_smp2p_modem_setup_ready_isr() calls ipa_setup() after
the modem has signaled the hardware is ready. This can happen at
any time, and there is no guarantee the hardware is active.
Have ipa_smp2p_modem_setup() take an IPA clock reference before it
calls ipa_setup(), and release it once setup is complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I
recommend it's easier for understanding to make the "ready-interrupt"
a bundle for it is a parallel description as "shutdown" which is appended
after the slash.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements two forms of out-of-band communication between
the AP and modem.
- QMI is a mechanism that allows clients running on the AP
interact with services running on the modem (and vice-versa).
The AP IPA driver uses QMI to communicate with the corresponding
IPA driver resident on the modem, to agree on parameters used
with the IPA hardware and to ensure both sides are ready before
entering operational mode.
- SMP2P is a more primitive mechanism available for the modem and
AP to communicate with each other. It provides a means for either
the AP or modem to interrupt the other, and furthermore, to provide
32 bits worth of information. The IPA driver uses SMP2P to tell
the modem what the state of the IPA clock was in the event of a
crash. This allows the modem to safely access the IPA hardware
(or avoid doing so) when a crash occurs, for example, to access
information within the IPA hardware.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
