summaryrefslogtreecommitdiff
path: root/drivers/net/macsec.c
AgeCommit message (Collapse)Author
2021-10-24net: drivers: get ready for const netdev->dev_addrJakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. We will make netdev->dev_addr a const. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: macsec: fix the length used to copy the key for offloadingAntoine Tenart
The key length used when offloading macsec to Ethernet or PHY drivers was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length accepted in uAPI) and secy->key_len to copy it. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-03net: macsec: Add missing documentation for 'gro_cells'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/macsec.c:113: warning: Function parameter or member 'gro_cells' not described in 'macsec_dev' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-26-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: macsec: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/0d81e0f7-7784-42df-8e10-d0b77ca5b7ee@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08macsec: avoid use-after-free in macsec_handle_frame()Eric Dumazet
De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18netlink: consistently use NLA_POLICY_MIN_LEN()Johannes Berg
Change places that open-code NLA_POLICY_MIN_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28net: get rid of lockdep_set_class_and_subclass()Cong Wang
lockdep_set_class_and_subclass() is meant to reduce the _nested() annotations by assigning a default subclass. For addr_list_lock, we have to compute the subclass at run-time as the netdevice topology changes after creation. So, we should just get rid of these lockdep_set_class_and_subclass() and stick with our _nested() annotations. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09net: change addr_list_lock back to static keyCong Wang
The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: macsec: fix rtnl locking issueAntoine Tenart
netdev_update_features() must be called with the rtnl lock taken. Not doing so triggers a warning, as ASSERT_RTNL() is used in __netdev_update_features(), the first function called by netdev_update_features(). Fix this. Fixes: c850240b6c41 ("net: macsec: report real_dev features when HW offloading is enabled") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net: partially revert dynamic lockdep key changesCong Wang
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: macsec: preserve ingress frame orderingScott Dial
MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa86431afbafe15284a3ad5ac19b49b88e3, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by: Scott Dial <scott@scottdial.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24macsec: avoid to set wrong mtuTaehee Yoo
When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09net: macsec: fix using wrong structure in macsec_changelink()Taehee Yoo
In the macsec_changelink(), "struct macsec_tx_sa tx_sc" is used to store "macsec_secy.tx_sc". But, the struct type of tx_sc is macsec_tx_sc, not macsec_tx_sa. So, the macsec_tx_sc should be used instead. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link set macsec0 type macsec encrypt off Splat looks like: [61119.963483][ T9335] ================================================================== [61119.964709][ T9335] BUG: KASAN: slab-out-of-bounds in macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.965787][ T9335] Read of size 160 at addr ffff888020d69c68 by task ip/9335 [61119.966699][ T9335] [61119.966979][ T9335] CPU: 0 PID: 9335 Comm: ip Not tainted 5.6.0+ #503 [61119.967791][ T9335] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [61119.968914][ T9335] Call Trace: [61119.969324][ T9335] dump_stack+0x96/0xdb [61119.969809][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.970554][ T9335] print_address_description.constprop.5+0x1be/0x360 [61119.971294][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.971973][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.972703][ T9335] __kasan_report+0x12a/0x170 [61119.973323][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.973942][ T9335] kasan_report+0xe/0x20 [61119.974397][ T9335] check_memory_region+0x149/0x1a0 [61119.974866][ T9335] memcpy+0x1f/0x50 [61119.975209][ T9335] macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.975825][ T9335] ? macsec_get_stats64+0x3e0/0x3e0 [macsec] [61119.976451][ T9335] ? kernel_text_address+0x111/0x120 [61119.976990][ T9335] ? pskb_expand_head+0x25f/0xe10 [61119.977503][ T9335] ? stack_trace_save+0x82/0xb0 [61119.977986][ T9335] ? memset+0x1f/0x40 [61119.978397][ T9335] ? __nla_validate_parse+0x98/0x1ab0 [61119.978936][ T9335] ? macsec_alloc_tfm+0x90/0x90 [macsec] [61119.979511][ T9335] ? __kasan_slab_free+0x111/0x150 [61119.980021][ T9335] ? kfree+0xce/0x2f0 [61119.980700][ T9335] ? netlink_trim+0x196/0x1f0 [61119.981420][ T9335] ? nla_memcpy+0x90/0x90 [61119.982036][ T9335] ? register_lock_class+0x19e0/0x19e0 [61119.982776][ T9335] ? memcpy+0x34/0x50 [61119.983327][ T9335] __rtnl_newlink+0x922/0x1270 [ ... ] Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06macsec: fix NULL dereference in macsec_upd_offload()Davide Caratti
macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE without checking its presence in the request message, and this causes a NULL dereference. Fix it rejecting any configuration that does not include this attribute. Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: macsec: add support for specifying offload upon link creationMark Starovoytov
This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: report real_dev features when HW offloading is enabledMark Starovoytov
This patch makes real_dev_feature propagation by MACSec offloaded device. Issue description: real_dev features are disabled upon macsec creation. Root cause: Features limitation (specific to SW MACSec limitation) is being applied to HW offloaded case as well. This causes 'set_features' request on the real_dev with reduced feature set due to chain propagation. Proposed solution: Report real_dev features when HW offloading is enabled. NB! MACSec offloaded device does not propagate VLAN offload features at the moment. This can potentially be added later on as a separate patch. Note: this patch requires HW offloading to be enabled by default in order to function properly. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: add support for getting offloaded statsDmitry Bogdanov
When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: support multicast/broadcast when offloadingMark Starovoytov
The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: allow multiple macsec devices with offloadDmitry Bogdanov
Offload engine can setup several SecY. Each macsec interface shall have its own mac address. It will filter a traffic by dest mac address. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: init secy pointer in macsec_contextDmitry Bogdanov
This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: macsec: add support for offloading to the MACAntoine Tenart
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23macsec: restrict to ethernet devicesWillem de Bruijn
Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)Era Mayflower
Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16macsec: Support XPN frame handling - IEEE 802.1AEbwEra Mayflower
Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: invoke mdo_upd_secy callback when mac address changedDmitry Bogdanov
Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: macsec: update SCI upon MAC address change.Dmitry Bogdanov
SCI should be updated, because it contains MAC in its first 6 octets. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03macsec: add missing attribute validation for portJakub Kicinski
Add missing attribute validation for IFLA_MACSEC_PORT to the netlink policy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: macsec: PN wrap callbackAntoine Tenart
Allow to call macsec_pn_wrapped from hardware drivers to notify when a PN rolls over. Some drivers might used an interrupt to implement this. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: macsec: add nla support for changing the offloading selectionAntoine Tenart
MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: macsec: hardware offloading infrastructureAntoine Tenart
This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: macsec: move some definitions in a dedicated headerAntoine Tenart
This patch moves some structure, type and identifier definitions into a MACsec specific header. This patch does not modify how the MACsec code is running and only move things around. This is a preparation for the future MACsec hardware offloading support, which will re-use those definitions outside macsec.c. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24macsec: fix refcnt leak in module exit routineTaehee Yoo
When a macsec interface is created, it increases a refcnt to a lower device(real device). when macsec interface is deleted, the refcnt is decreased in macsec_free_netdev(), which is ->priv_destructor() of macsec interface. The problem scenario is this. When nested macsec interfaces are exiting, the exit routine of the macsec module makes refcnt leaks. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link add macsec1 link macsec0 type macsec modprobe -rv macsec [ 208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1 Steps of exit routine of macsec module are below. 1. Calls ->dellink() in __rtnl_link_unregister(). 2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in netdev_run_todo(). 3. Calls ->priv_destruvtor() in netdev_run_todo(). Step2 checks refcnt, but step3 decreases refcnt. So, step2 waits forever. This patch makes the macsec module do not hold a refcnt of the lower device because it already holds a refcnt of the lower device with netdev_upper_dev_link(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26macsec: drop skb sk before calling gro_cells_receiveXin Long
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Fei Liu <feliu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02macsec: fix checksumming after decryptionAndreas Steinmetz
Fix checksumming after decryption. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02macsec: fix use-after-free of skb during RXAndreas Steinmetz
Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01macsec: add noinline tag to avoid a frame size warningFlorian Westphal
seen with debug config: drivers/net/macsec.c: In function 'dump_secy': drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=] just mark it with noinline_for_stack, this is netlink dump code. v2: use 'static noinline_for_stack int' consistently Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-28macsec: let the administrator set UP state even if lowerdev is downSabrina Dubroca
Currently, the kernel doesn't let the administrator set a macsec device up unless its lower device is currently up. This is inconsistent, as a macsec device that is up won't automatically go down when its lower device goes down. Now that linkstate propagation works, there's really no reason for this limitation, so let's remove it. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-28macsec: update operstate when lower device changesSabrina Dubroca
Like all other virtual devices (macvlan, vlan), the operstate of a macsec device should match the state of its lower device. This is done by calling netif_stacked_transfer_operstate from its netdevice notifier. We also need to call netif_stacked_transfer_operstate when a new macsec device is created, so that its operstate is set properly. This is only relevant when we try to bring the device up directly when we create it. Radu Rendec proposed a similar patch, inspired from the 802.1q driver, that included changing the administrative state of the macsec device, instead of just the operstate. This version is similar to what the macvlan driver does, and updates only the operstate. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-02 02:00:31 +0000