summaryrefslogtreecommitdiff
path: root/drivers/net/pcs/pcs-xpcs.h
AgeCommit message (Collapse)Author
2022-06-17net: pcs: xpcs: add CL37 1000BASE-X AN supportOng Boon Leong
For CL37 1000BASE-X AN, DW xPCS does not support C22 method but offers C45 vendor-specific MII MMD for programming. We also add the ability to disable Autoneg (through ethtool for certain network switch that supports 1000BASE-X (1000Mbps and Full-Duplex) but not Autoneg capability. v4: Fixes to comment from Russell King. Thanks! https://patchwork.kernel.org/comment/24894239/ Make xpcs_modify_changed() as private, change to use mdiodev_modify_changed() for cleaner code. v3: Fixes to issues spotted by Russell King. Thanks! https://patchwork.kernel.org/comment/24890210/ Use phylink_mii_c22_pcs_decode_state(), remove unnecessary interrupt clearing and skip speed & duplex setting if AN is enabled. v2: Fixes to issues spotted by Russell King in v1. Thanks! https://patchwork.kernel.org/comment/24826650/ Use phylink_mii_c22_pcs_encode_advertisement() and implement C45 MII ADV handling since IP only support C45 access. Tested-by: Emilio Riva <emilio.riva@ericsson.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1110Vladimir Oltean
The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it manages it through the register space of the XPCS itself, in a small register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e. This coincides with where the registers for the default Synopsys PMA are, but the register definitions are of course not the same. This situation is an odd hardware quirk, but the simplest way to manage it is to drive the SJA1110's PMA from within the XPCS driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: add support for NXP SJA1105Vladimir Oltean
The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4. The generic code works fine, except there is an integration issue which needs to be dealt with: in this switch, the XPCS is integrated with a PMA that has the TX lane polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain normal non-inverted behavior, the TX lane polarity must be inverted in the PCS, via the DIGITAL_CONTROL_2 register. We introduce a pma_config() method in xpcs_compat which is called by the phylink_pcs_config() implementation. Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3. We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in order for the XPCS driver to recognize it. This PHY ID is added to the public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105 driver to be able to use it in a later patch). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: pcs: xpcs: move register bit descriptions to a header fileVladimir Oltean
Vendors which integrate the Designware XPCS might modify a few things here and there, and to support those, it's best to create separate C files in order to not clutter up the main pcs-xpcs.c. Because the vendor files might want to access the common xpcs registers too, let's move them in a header file which is local to this driver and can be included by vendor files as appropriate. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>