summaryrefslogtreecommitdiff
path: root/drivers/net/phy/dp83822.c
AgeCommit message (Collapse)Author
2020-11-25net: phy: ti: remove the use of .ack_interrupt()Ioana Ciornei
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: phy: ti: implement generic .handle_interrupt() callbackIoana Ciornei
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-19net: phy: dp83822: Update the fiber advertisement for speedDan Murphy
Update the fiber advertisement for speed and duplex modes with the 100base-FX full and half linkmode entries. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28net: phy: DP83822: Add ability to advertise Fiber connectionDan Murphy
The DP83822 can be configured to use a Fiber connection. The strap register is read to determine if the device has been configured to use a fiber connection. With the fiber connection the PHY can be configured to detect whether the fiber connection is active by either a high signal or a low signal. Fiber mode is only applicable to the DP83822 so rework the PHY match table so that non-fiber PHYs can still use the same driver but not call or use any of the fiber features. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25net: phy: DP83822: Add setting the fixed internal delayDan Murphy
The DP83822 can be configured to use the RGMII interface. There are independent fixed 3.5ns clock shift (aka internal delay) for the TX and RX paths. This allow either one to be set if the MII interface is RGMII and the value is set in the firmware node. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: phy: DP83822: Fix WoL in config init to be disabledDan Murphy
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: phy: DP83822: Add support for additional DP83825 devicesDan Murphy
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23phy: dp83826: Add phy IDs for DP83826N and 826NCDan Murphy
Add phy IDs to the DP83822 phy driver for the DP83826N and the DP83826NC devices. The register map and features are the same for basic enablement. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: phy: remove calls to genphy_config_initHeiner Kallweit
Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers. v2: - remove call also from new adin PHY driver v3: - pass NULL as config_init function pointer for dp83848 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: phy: switch drivers to use dynamic feature detectionHeiner Kallweit
Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net: phy: Add DP83825I to the DP83822 driverDan Murphy
Add the DP83825I ethernet PHY to the DP83822 driver. These devices share the same WoL register bits and addresses. The phy_driver init was made into a macro as there may be future devices appended to this driver that will share the register space. http://www.ti.com/lit/gpn/dp83825i Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Fixup GPLv2 SPDX tags based on license textAndrew Lunn
A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove flag PHY_HAS_INTERRUPT from driver configsHeiner Kallweit
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: phy: remove generic settings for callbacks config_aneg and read_status ↵Heiner Kallweit
from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: phy: DP83822 initial driver submissionDan Murphy
Add support for the TI DP83822 10/100Mbit ethernet phy. The DP83822 provides flexibility to connect to a MAC through a standard MII, RMII or RGMII interface. In addition the DP83822 needs to be removed from the DP83848 driver as the WoL support is added here for this device. Datasheet: http://www.ti.com/product/DP83822I/datasheet Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-17 06:09:56 +0000