summaryrefslogtreecommitdiff
path: root/drivers/net/phy/microchip.c
AgeCommit message (Collapse)Author
2019-08-17net: phy: remove calls to genphy_config_initHeiner Kallweit
Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers. v2: - remove call also from new adin PHY driver v3: - pass NULL as config_init function pointer for dp83848 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: phy: switch drivers to use dynamic feature detectionHeiner Kallweit
Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove flag PHY_HAS_INTERRUPT from driver configsHeiner Kallweit
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add phydev_warn()Andrew Lunn
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were simple overlapping changes in microchip driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20lan78xx: Read LED states from Device TreePhil Elwell
Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12lan78xx: PHY DSP registers initialization to address EEE link drop issues ↵Raghuram Chary J
with long cables The patch is to configure DSP registers of PHY device to handle Gbe-EEE failures with >40m cable length. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: phy: remove generic settings for callbacks config_aneg and read_status ↵Heiner Kallweit
from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16net: phy: Remove residual magic from PHY driversAndrew Lunn
commit fa8cddaf903c ("net phylib: Remove unnecessary condition check in phy") removed the only place where the PHY flag PHY_HAS_MAGICANEG was checked. But it left the flag being set in the drivers. Remove the flag. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: phy: switch remaining users to phy_(read|write)_mmd()Russell King
Switch everyone over to using phy_read_mmd() and phy_write_mmd() now that they are able to handle both Clause 22 indirect addressing and Clause 45 direct addressing methods to the MMD registers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: phy: phy drivers should not set SUPPORTED_[Asym_]PauseTimur Tabi
Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: phy: Fix the mdix_ctrl changesRaju Lakkaraju
PHY drivers to have an eth_tp_mdix_ctrl to indicate what is the configured MDI setting, and read eth_tp_mdi to indicate what is the current status, Add new parameter mdix_ctrl in phy_device structure and fix driver. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18lan78xx: relocate mdix setting to phy driverWoojung Huh
Relocate mdix code to phy driver to be called at config_init(). Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19phy: mark lan88xx_suspend() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/phy/microchip.c:58:5: warning: no previous prototype for 'lan88xx_suspend' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09add microchip LAN88xx phy driverWoojung.Huh@microchip.com
Add Microchip LAN88XX phy driver for phylib. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>