summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2023-03-15net: phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()Vladimir Oltean
Since the blamed commit, phy_ethtool_get_wol() and phy_ethtool_set_wol() acquire phydev->lock, but the mscc phy driver implementations, vsc85xx_wol_get() and vsc85xx_wol_set(), acquire the same lock as well, resulting in a deadlock. $ ip link set swp3 down ============================================ WARNING: possible recursive locking detected mscc_felix 0000:00:00.5 swp3: Link is Down -------------------------------------------- ip/375 is trying to acquire lock: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: vsc85xx_wol_get+0x2c/0xf4 but task is already holding lock: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock); lock(&dev->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/375: #0: ffffd43b2a955788 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x144/0x58c #1: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c Call trace: __mutex_lock+0x98/0x454 mutex_lock_nested+0x2c/0x38 vsc85xx_wol_get+0x2c/0xf4 phy_ethtool_get_wol+0x50/0x6c phy_suspend+0x84/0xcc phy_state_machine+0x1b8/0x27c phy_stop+0x70/0x154 phylink_stop+0x34/0xc0 dsa_port_disable_rt+0x2c/0xa4 dsa_slave_close+0x38/0xec __dev_close_many+0xc8/0x16c __dev_change_flags+0xdc/0x218 dev_change_flags+0x24/0x6c do_setlink+0x234/0xea4 __rtnl_newlink+0x46c/0x878 rtnl_newlink+0x50/0x7c rtnetlink_rcv_msg+0x16c/0x58c Removing the mutex_lock(&phydev->lock) calls from the driver restores the functionality. Fixes: 2f987d486610 ("net: phy: Add locks to ethtool functions") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230314153025.2372970-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status failsHeiner Kallweit
If genphy_read_status fails then further access to the PHY may result in unpredictable behavior. To prevent this bail out immediately if genphy_read_status fails. Fixes: 4223dbffed9f ("net: phy: smsc: Re-enable EDPD mode for LAN87xx") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-10net: phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bitRadu Pirea (OSS)
According to the TJA1103 user manual, the bit for the reversed role in MII or RMII modes is bit 4. Cc: <stable@vger.kernel.org> # 5.15+ Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com> Link: https://lore.kernel.org/r/20230309100111.1246214-1-radu-nicolae.pirea@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06net: phy: smsc: fix link up detection in forced irq modeHeiner Kallweit
Currently link up can't be detected in forced mode if polling isn't used. Only link up interrupt source we have is aneg complete which isn't applicable in forced mode. Therefore we have to use energy-on as link up indicator. Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-06net: phylib: get rid of unnecessary lockingRussell King (Oracle)
The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa810e ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-02net: lan78xx: fix accessing the LAN7800's internal phy specific registers ↵Yuiko Oshino
from the MAC driver Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-28net: phy: unlock on error in phy_probe()Dan Carpenter
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock the &phydev->lock mutex before returning. Fixes: 3eeca4e199ce ("net: phy: do not force EEE support") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-27Merge tag 'net-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-27net: phy: c45: fix network interface initialization failures on xtensa, ↵Oleksij Rempel
arm:cubieboard Without proper initialization, "changed" returned random numbers and caused interface initialization failures. Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-23net: phy: c45: genphy_c45_ethtool_set_eee: validate EEE link modesOleksij Rempel
Currently, it is possible to let some PHYs to advertise not supported EEE link modes. So, validate them before overwriting existing configuration. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: do not force EEE supportOleksij Rempel
With following patches: commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: add genphy_c45_an_config_eee_aneg() functionOleksij Rempel
Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-23net: phy: c45: use "supported_eee" instead of supported for access validationOleksij Rempel
Make sure we use proper variable to validate access to potentially not supported registers. Otherwise we will get false read/write errors. Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202302211644.c12d19de-yujie.liu@intel.com Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-20net: phy: Read EEE abilities when using .featuresAndrew Lunn
A PHY driver can use a static integer value to indicate what link mode features it supports, i.e, its abilities.. This is the old way, but useful when dynamically determining the devices features does not work, e.g. support of fibre. EEE support has been moved into phydev->supported_eee. This needs to be set otherwise the code assumes EEE is not supported. It is normally set as part of reading the devices abilities. However if a static integer value was used, the dynamic reading of the abilities is not performed. Add a call to genphy_c45_read_eee_abilities() to read the EEE abilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20net: phy: Add locks to ethtool functionsAndrew Lunn
The phydev lock should be held while accessing members of phydev, or calling into the driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20net: phy: marvell: Use the unlocked genphy_c45_ethtool_get_eee()Andrew Lunn
phy_ethtool_get_eee() is about to gain locking of the phydev lock. This means it cannot be used within a PHY driver without causing a deadlock. Swap to using genphy_c45_ethtool_get_eee() which assumes the lock has already been taken. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-15net: phy: c45: genphy_c45_an_config_aneg(): fix uninitialized symbol errorOleksij Rempel
Fix warning: drivers/net/phy/phy-c45.c:712 genphy_c45_write_eee_adv() error: uninitialized symbol 'changed' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302150232.q6idsV8s-lkp@intel.com/ Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230215050453.2251360-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: phy: motorcomm: uninitialized variables in yt8531_link_change_notify()Dan Carpenter
These booleans are never set to false, but are just used without being initialized. Fixes: 4ac94f728a58 ("net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Frank Sae <Frank.Sae@motor-comm.com> Link: https://lore.kernel.org/r/Y+xd2yJet2ImHLoQ@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: phylink: support validated pause and autoneg in fixed-linkIvan Bornyakov
In fixed-link setup phylink_parse_fixedlink() unconditionally sets Pause, Asym_Pause and Autoneg bits to "supported" bitmap, while MAC may not support these. This leads to ethtool reporting: > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes regardless of what is actually supported. Instead of unconditionally set Pause, Asym_Pause and Autoneg it is sensible to set them according to validated "supported" bitmap, i.e. the result of phylink_validate(). Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: start using genphy_c45_ethtool_get/set_eee()Oleksij Rempel
All preparations are done. Now we can start using new functions and remove the old code. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: migrate phy_init_eee() to genphy_c45_eee_is_active()Oleksij Rempel
Reduce code duplicated by migrating phy_init_eee() to genphy_c45_eee_is_active(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: c45: migrate to genphy_c45_write_eee_adv()Oleksij Rempel
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: c22: migrate to genphy_c45_write_eee_adv()Oleksij Rempel
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_ethtool_get/set_eee() supportOleksij Rempel
Add replacement for phy_ethtool_get/set_eee() functions. Current phy_ethtool_get/set_eee() implementation is great and it is possible to make it even better: - this functionality is for devices implementing parts of IEEE 802.3 specification beyond Clause 22. The better place for this code is phy-c45.c - currently it is able to do read/write operations on PHYs with different abilities to not existing registers. It is better to use stored supported_eee abilities to avoid false read/write operations. - the eee_active detection will provide wrong results on not supported link modes. It is better to validate speed/duplex properties against supported EEE link modes. - it is able to support only limited amount of link modes. We have more EEE link modes... By refactoring this code I address most of this point except of the last one. Adding additional EEE link modes will need more work. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: export phy_check_valid() functionOleksij Rempel
This function will be needed for genphy_c45_ethtool_get_eee() provided by next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: micrel: add ksz9477_get_features()Oleksij Rempel
KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control and capability 1" (Register 3.20) content depending on configuration of "EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect 3.20 register. So, instead of depending on register 3.20, driver should set supported_eee. Proper supported_eee configuration is needed to make use of generic PHY c45 set/get_eee functions provided by next patches. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_read_eee_abilities() functionOleksij Rempel
Add generic function for EEE abilities defined by IEEE 802.3 specification. For now following registers are supported: - IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20) - IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register (Register 1.2295) Since I was not able to find any flag signaling support of these registers, we should detect link mode abilities first and then based on these abilities doing EEE link modes detection. Results of EEE ability detection will be stored into new variable phydev->supported_eee. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: micrel: Add PHC support for lan8841Horatiu Vultur
Add support for PHC and timestamping operations for the lan8841 PHY. PTP 1-step and 2-step modes are supported, over Ethernet and UDP both ipv4 and ipv6. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-09net: micrel: Cable Diagnostics feature for lan8841 PHYHoratiu Vultur
Add support for cable diagnostics in lan8841 PHY. It has the same registers layout as lan8814 PHY, therefore reuse the functionality. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230208114406.1666671-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08net: micrel: Add support for lan8841 PHYHoratiu Vultur
The LAN8841 is completely integrated triple-speed (10BASE-T/ 100BASE-TX/ 1000BASE-T) Ethernet physical layer transceivers for transmission and reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded twisted pair (UTP) cables. The LAN8841 offers the industry-standard GMII/MII as well as the RGMII. Some of the features of the PHY are: - Wake on LAN - Auto-MDIX - IEEE 1588-2008 (V2) - LinkMD Capable diagnosis Currently the patch offers support only for link configuration. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit
Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-03net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phyFrank Sae
Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have verified the driver on AM335x platform with yt8531 board. On the board, yt8531 gigabit ethernet phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and wol(magic package). Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03net: phy: Add dts support for Motorcomm yt8531s gigabit ethernet phyFrank Sae
Add dts support for Motorcomm yt8531s gigabit ethernet phy. Change yt8521_probe to support clk config of yt8531s. Becase yt8521_probe does the things which yt8531s is needed, so removed yt8531s function. This patch has been verified on AM335x platform with yt8531s board. Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03net: phy: Add dts support for Motorcomm yt8521 gigabit ethernet phyFrank Sae
Add dts support for Motorcomm yt8521 gigabit ethernet phy. Add ytphy_rgmii_clk_delay_config function to support dst config for the delay of rgmii clk. This funciont is common for yt8521, yt8531s and yt8531. This patch has been verified on AM335x platform. Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet phyFrank Sae
Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet phy. This is a preparatory patch. Add BIT macro for 0xA012 reg, and supplement for 0xA001 and 0xA003 reg. These will be used to support dts. Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-03net: phylink: move phy_device_free() to correctly release phy deviceClément Léger
After calling fwnode_phy_find_device(), the phy device refcount is incremented. Then, when the phy device is attached to a netdev with phy_attach_direct(), the refcount is also incremented but only decremented in the caller if phy_attach_direct() fails. Move phy_device_free() before the "if" to always release it correctly. Indeed, either phy_attach_direct() failed and we don't want to keep a reference to the phydev or it succeeded and a reference has been taken internally. Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-31net: phy: meson-gxl: Add generic dummy stubs for MMD register accessChris Healy
The Meson G12A Internal PHY does not support standard IEEE MMD extended register access, therefore add generic dummy stubs to fail the read and write MMD calls. This is necessary to prevent the core PHY code from erroneously believing that EEE is supported by this PHY even though this PHY does not support EEE, as MMD register access returns all FFFFs. Fixes: 5c3407abb338 ("net: phy: meson-gxl: add g12a support") Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Chris Healy <healych@amazon.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230130231402.471493-1-cphealy@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: phy: motorcomm: change the phy id of yt8521 and yt8531s to lowercaseFrank Sae
The phy id is usually defined in lower case. Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230128063558.5850-2-Frank.Sae@motor-comm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: phy: fix the spelling problem of SentinelFrank Sae
CHECK: 'sentinal' may be misspelled - perhaps 'sentinel'? Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230128063558.5850-1-Frank.Sae@motor-comm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: phy: fix null dereference in phy_attach_directColin Foster
Commit bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") introduced a link between net devices and phy devices. It fails to check whether dev is NULL, leading to a NULL dereference error. Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-28net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devicesAndre Kalb
The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that. Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Andre Kalb <andre.kalb@sma.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-23net: phy: microchip: run phy initialization during each link updateRakesh Sankaranarayanan
PHY initialization is supposed to run on every mode changes. "lan87xx_config_aneg()" verifies every mode change using "phy_modify_changed()" function. Earlier code had phy_modify_changed() followed by genphy_soft_reset. But soft_reset resets all the pre-configured register values to default state, and lost all the initialization done. With this reason gen_phy_reset was removed. But it need to go through init sequence each time the mode changed. Update lan87xx_config_aneg() to invoke phy_init once successful mode update is detected. PHY init sequence added in lan87xx_phy_init() have slave init commands executed every time. Update the init sequence to run slave init only if phydev is in slave mode. Test setup contains LAN9370 EVB connected to SAMA5D3 (Running DSA), and issue can be reproduced by connecting link to any of the available ports after SAMA5D3 boot-up. With this issue, port will fail to update link state. But once the SAMA5D3 is reset with LAN9370 link in connected state itself, on boot-up link state will be reported as UP. But Again after some time, if link is moved to DOWN state, it will not get reported. Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230120104733.724701-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net: mdio: warn once if addr parameter is invalid in mdiobus_get_phy()Heiner Kallweit
If mdiobus_get_phy() is called with an invalid addr parameter, then the caller has a bug. Print a call trace to help identifying the caller. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/daec3f08-6192-ba79-f74b-5beb436cab6c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20net: phy: Remove fallback to old C45 methodAndrew Lunn
Now that all MDIO bus drivers which support C45 implement the c45 specific ops, remove the fallback to the old method. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19net: phy: fix use of uninit variable when setting PLCA configPiergiorgio Beruto
Coverity reported the following: *** CID 1530573: (UNINIT) drivers/net/phy/phy-c45.c:1036 in genphy_c45_plca_set_cfg() 1030 return ret; 1031 1032 val = ret; 1033 } 1034 1035 if (plca_cfg->node_cnt >= 0) vvv CID 1530573: (UNINIT) vvv Using uninitialized value "val". 1036 val = (val & ~MDIO_OATC14_PLCA_NCNT) | 1037 (plca_cfg->node_cnt << 8); 1038 1039 if (plca_cfg->node_id >= 0) 1040 val = (val & ~MDIO_OATC14_PLCA_ID) | 1041 (plca_cfg->node_id); drivers/net/phy/phy-c45.c:1076 in genphy_c45_plca_set_cfg() 1070 return ret; 1071 1072 val = ret; 1073 } 1074 1075 if (plca_cfg->burst_cnt >= 0) vvv CID 1530573: (UNINIT) vvv Using uninitialized value "val". 1076 val = (val & ~MDIO_OATC14_PLCA_MAXBC) | 1077 (plca_cfg->burst_cnt << 8); 1078 1079 if (plca_cfg->burst_tmr >= 0) 1080 val = (val & ~MDIO_OATC14_PLCA_BTMR) | 1081 (plca_cfg->burst_tmr); This is not actually creating a real problem because the path leading to 'val' being used uninitialized will eventually override the full content of that variable before actually using it for writing the register. However, the fix is simple and comes at basically no cost. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Fixes: 493323416fed ("drivers/net/phy: add helpers to get/set PLCA configuration") Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/f22f1864165a8dbac8b7a2277f341bc8e7a7b70d.1674056765.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-23 19:25:34 +0000