summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2022-05-10net: phy: micrel: Fix incorrect variable type in micrelWan Jiabing
In lanphy_read_page_reg, calling __phy_read() might return a negative error code. Use 'int' to check the error code. Fixes: 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09net: phy: Fix race condition on link status changeFrancesco Dolcini
This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05net: phy: micrel: Pass .probe for KS8737Fabio Estevam
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/ resume hooks are used. These functions require the probe function to be called so that priv can be allocated. Otherwise, a NULL pointer dereference happens inside kszphy_config_reset(). Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061Fabio Estevam
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONTMatthew Hagan
As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: phy: marvell10g: fix return value on errorBaruch Siach
Return back the error value that we get from phy_read_mmd(). Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-15net: phy: LAN937x: added PHY_POLL_CABLE_TEST flagArun Ramadoss
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: phy: LAN87xx: remove genphy_softreset in config_anegArun Ramadoss
When the T1 phy master/slave state is changed, at the end of config_aneg function genphy_softreset is called. After the reset all the registers configured during the config_init are restored to default value. To avoid this, removed the genphy_softreset call. v1->v2 ------ Added the author in cc Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04net: phy: micrel: Remove DT option lan8814,ignore-tsHoratiu Vultur
When the PHY and the MAC are capable of doing timestamping, the PHY has priority. Therefore the DT option lan8814,ignore-ts was added such that the PHY will not expose a PHC so then the timestamping was done in the MAC. This is not the correct approach of doing it, therefore remove this. Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04net: phy: micrel: Remove latency from driverHoratiu Vultur
Based on the discussions here[1], the PHY driver is the wrong place to set the latencies, therefore remove them. [1] https://lkml.org/lkml/2022/3/4/325 Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-25net: phy: broadcom: Fix brcm_fet_config_init()Florian Fainelli
A Broadcom AC201 PHY (same entry as 5241) would be flagged by the Broadcom UniMAC MDIO controller as not completing the turn around properly since the PHY expects 65 MDC clock cycles to complete a write cycle, and the MDIO controller was only sending 64 MDC clock cycles as determined by looking at a scope shot. This would make the subsequent read fail with the UniMAC MDIO controller command field having MDIO_READ_FAIL set and we would abort the brcm_fet_config_init() function and thus not probe the PHY at all. After issuing a software reset, wait for at least 1ms which is well above the 1us reset delay advertised by the datasheet and issue a dummy read to let the PHY turn around the line properly. This read specifically ignores -EIO which would be returned by MDIO controllers checking for the line being turned around. If we have a genuine reaad failure, the next read of the interrupt status register would pick it up anyway. Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: phy: mscc: Add MODULE_FIRMWARE macrosJuerg Haefliger
The driver requires firmware so define MODULE_FIRMWARE so that modinfo provides the details. Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files") Signed-off-by: Juerg Haefliger <juergh@canonical.com> Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15net: phy: Kconfig: micrel_phy: fix dependency issueAnders Roxell
When building driver CONFIG_MICREL_PHY the follow error shows up: aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index' micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register' micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'. Arnd describes in a good way why its needed to add this depends in patch e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies"). Reported-by: kernel test robot <lkp@intel.com> Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-15net: sfp: add 2500base-X quirk for Lantech SFP moduleMichael Walle
The Lantech 8330-262D-E module is 2500base-X capable, but it reports the nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the module. The following in an EEPROM dump of such a SFP with the serial number redacted: 00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????... 10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech 20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262 30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.? 40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX 50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h??? 60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT 70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-14net: phy: marvell: Fix invalid comparison in the resume and suspend functionsKurt Cancemi
This bug resulted in only the current mode being resumed and suspended when the PHY supported both fiber and copper modes and when the PHY only supported copper mode the fiber mode would incorrectly be attempted to be resumed and suspended. Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by: Kurt Cancemi <kurt@x64architecture.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: phy: meson-gxl: improve link-up behaviorHeiner Kallweit
Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: phy: DP83822: clear MISR2 register to disable interruptsClément Léger
MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-08net: phy: lan87xx: use genphy_read_master_slave in read_statusArun Ramadoss
To read the master slave configuration of the LAN87xx T1 phy, used the generic phy driver genphy_read_master_slave function. Removed the local lan87xx_read_master_slave function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-08net: phy: exported the genphy_read_master_slave functionArun Ramadoss
genphy_read_master_slave function allows to configure the master/slave for gigabit phys only. In order to use this function irrespective of speed, moved the speed check to the genphy_read_status call. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-07net: phy: micrel: Move netif_rx() outside of IRQ-off section.Sebastian Andrzej Siewior
lan8814_match_rx_ts() invokes netif_rx() with disables interrupts outside which will create a warning. Invoking netif_rx_ni() with disabled interrupts is wrong even without the recent rework because netif_rx_ni() would enable interrupts while processing the softirq. This in turn can lead to dead lock if an interrupts triggers and attempts to acquire kszphy_ptp_priv::rx_ts_lock. Move netif_rx() outside the IRQ-off section. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: phy: micrel: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07micrel: Use generic ptp_msg_is_sync() functionKurt Kanzenbach
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07dp83640: Use generic ptp_msg_is_sync() functionKurt Kanzenbach
Use generic ptp_msg_is_sync() function to avoid code duplication. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: phy: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: meson-gxl: fix interrupt handling in forced modeHeiner Kallweit
This PHY doesn't support a link-up interrupt source. If aneg is enabled we use the "aneg complete" interrupt for this purpose, but if aneg is disabled link-up isn't signaled currently. According to a vendor driver there's an additional "energy detect" interrupt source that can be used to signal link-up if aneg is disabled. We can safely ignore this interrupt source if aneg is enabled. This patch was tested on a TX3 Mini TV box with S905W (even though boot message says it's a S905D). This issue has been existing longer, but due to changes in phylib and the driver the patch applies only from the commit marked as fixed. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: phy: added ethtool master-slave configuration supportArun Ramadoss
To configure the T1 phy as master or slave using the ethtool -s <dev> master-slave <forced-master/forced-slave>, the config_aneg and read status functions are added. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: added the LAN937x phy supportArun Ramadoss
LAN937x T1 switch is based on LAN87xx Phy, so reusing the init script of the LAN87xx. There is a workaround in accessing the DSP bank register for LAN937x Phy. Whenever there is a bank switch to DSP registers, then we need a one dummy read access before proceeding to the actual register access. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: updated the initialization routine for LAN87xxArun Ramadoss
The new initialization sequence is the improvement to the existing init routine. Init routine does soft reset, run init script and set Hw_init. Added the new access_smi_poll_timeout() for polling smi bank write. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: removed empty lines in LAN87XXArun Ramadoss
Removed the empty lines in struct phy_drivers. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: used the PHY_ID_MATCH_MODEL macro for LAN87XXArun Ramadoss
Used the PHY_ID_MATCH_MODEL MACRO for describing the phy_id and phy_id_mask. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: used genphy_soft_reset for phy reset in LAN87xxArun Ramadoss
Replaced the current code of resetting of LAN87xx phy to genphy_soft_reset library function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: micrel: 1588 support for LAN8814 phyDivya Koppera
Add support for 1588 in LAN8814 phy driver. It supports 1-step and 2-step timestamping. Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: micrel: Fix concurrent register accessDivya Koppera
Make Extended page register accessing atomic, to overcome unexpected output from register reads/writes. Fixes: 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02net: sfp: use %pe for printing errorsRussell King (Oracle)
Convert sfp to use %pe for printing error codes, which can print them as errno symbols rather than numbers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1nOyEN-00BuuE-OB@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-02net: phylink: use %pe for printing errorsRussell King (Oracle)
Convert phylink to use %pe for printing error codes, which can print them as errno symbols rather than numbers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1nOyEI-00Buu8-K9@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28Merge tag 'spi-remove-void' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark Brown says: ==================== spi: Make remove() return void This series from Uwe Kleine-König converts the spi remove function to return void since there is nothing useful that we can do with a failure and it as more buses are converted it'll enable further work on the driver core. ==================== Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28net: phylink: remove phylink_set_pcs()Russell King (Oracle)
As all users of phylink_set_pcs() have now been updated to use the mac_select_pcs() method, it can be removed from the phylink kernel API and its functionality moved into phylink_major_config(). Removing phylink_set_pcs() gives us a single approach for attaching a PCS within phylink. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: phy: phylink: fix DSA mac_select_pcs() introductionRussell King (Oracle)
Vladimir Oltean reports that probing on DSA drivers that aren't yet populating supported_interfaces now fails. Fix this by allowing phylink to detect whether DSA actually provides an underlying mac_select_pcs() implementation. Reported-by: Vladimir Oltean <olteanv@gmail.com> Fixes: bde018222c6b ("net: dsa: add support for phylink mac_select_pcs()") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1nMCD6-00A0wC-FG@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-19net: phylink: remove phylink_config's pcs_pollRussell King (Oracle)
phylink_config's pcs_poll is no longer used, let's get rid of it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-15net: phy: mediatek: remove PHY mode check on MT7531DENG Qingfang
The function mt7531_phy_mode_supported in the DSA driver set supported mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL for the internal PHY, so this check breaks the PHY initialization: mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL Remove the check to make it work again. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-07net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYsPavel Parkhomenko
It is mandatory for a software to issue a reset upon modifying RGMII Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC Specific Control register 2 (page 2, register 21) otherwise the changes won't be perceived by the PHY (the same is applicable for a lot of other registers). Not setting the RGMII delays on the platforms that imply it' being done on the PHY side will consequently cause the traffic loss. We discovered that the denoted soft-reset is missing in the m88e1121_config_aneg() method for the case if the RGMII delays are modified but the MDIx polarity isn't changed or the auto-negotiation is left enabled, thus causing the traffic loss on our platform with Marvell Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the delays have been actually set in the m88e1121_config_aneg_rgmii_delays() method. Cc: stable@vger.kernel.org Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-06net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYsPavel Parkhomenko
When setting up autonegotiation for 88E1118R and compatible PHYs, a software reset of PHY is issued before setting up polarity. This is incorrect as changes of MDI Crossover Mode bits are disruptive to the normal operation and must be followed by a software reset to take effect. Let's patch m88e1118_config_aneg() to fix the issue mentioned before by invoking software reset of the PHY just after setting up MDI-x polarity. Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: phylink: remove phylink_set_10g_modes()Russell King (Oracle)
phylink_set_10g_modes() is no longer used with the conversion of drivers to phylink_generic_validate(), so we can remove it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net: phy: Fix qca8081 with speeds lower than 2.5Gb/sJonathan McDowell
A typo in qca808x_read_status means we try to set SMII mode on the port rather than SGMII when the link speed is not 2.5Gb/s. This results in no traffic due to the mismatch in configuration between the phy and the mac. v2: Only change interface mode when the link is up Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status") Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-28 07:47:24 +0000