summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2020-04-24net: phylink, dsa: eliminate phylink_fixed_state_cb()Russell King
Move the callback into the phylink_config structure, rather than providing a callback to set this up. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-24net: phy: bcm84881: clear settings on link downRussell King
Clear the link partner advertisement, speed, duplex and pause when the link goes down, as other phylib drivers do. This avoids the stale link partner, speed and duplex settings being reported via ethtool. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-15net: marvell10g: soft-reset the PHY when coming out of low powerRussell King
Soft-reset the PHY when coming out of low power mode, which seems to be necessary with firmware versions 0.3.3.0 and 0.3.10.0. This depends on ("net: marvell10g: report firmware version") Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-15net: marvell10g: report firmware versionRussell King
Report the firmware version when probing the PHY to allow issues attributable to firmware to be diagnosed. Tested-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: add separate pcs operations structureRussell King
Add a separate set of PCS operations, which MAC drivers can use to couple phylink with their associated MAC PCS layer. The PCS operations include: - pcs_get_state() - reads the link up/down, resolved speed, duplex and pause from the PCS. - pcs_config() - configures the PCS for the specified mode, PHY interface type, and setting the advertisement. - pcs_an_restart() - restarts 802.3 in-band negotiation with the link partner - pcs_link_up() - informs the PCS that link has come up, and the parameters of the link. Link parameters are used to program the PCS for fixed speed and non-inband modes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: rename 'ops' to 'mac_ops'Russell King
Rename the bland 'ops' member of struct phylink to be a more descriptive 'mac_ops' - this is necessary as we're about to introduce another set of operations. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: change phylink_mii_c22_pcs_set_advertisement() prototypeRussell King
Change phylink_mii_c22_pcs_set_advertisement() to take only the PHY interface and advertisement mask, rather than the full phylink state. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: pcs: add 802.3 clause 45 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 45 cycles for 10GBASE-R. Only link up/down is supported, 10G full duplex is assumed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: pcs: add 802.3 clause 22 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 22 cycles, conforming to 802.3 clause 37 and Cisco SGMII specifications for the advertisement word. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: mdiobus: add APIs for modifying a MDIO device registerRussell King
Add APIs for modifying a MDIO device register, similar to the existing phy_modify() group of functions, but at mdiobus level instead. Adapt __phy_modify_changed() to use the new mdiobus level helper. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phylink: Add XLGMII supportJose Abreu
Add XLGMII interface and the list of XLGMII speeds to PHYLINK. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: phy: marvell10g: place in powersave mode at probeRussell King
Place the 88x3310 into powersaving mode when probing, which saves 600mW per PHY. For both PHYs on the Macchiatobin double-shot, this saves about 10% of the board idle power. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phy: marvell10g: add energy detect power down tunableRussell King
Add support for the energy detect power down tunable, which saves around 600mW when the link is down. The 88x3310 supports off, rx-only and NLP every second. Enable EDPD by default for 88x3310. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-02net: phy: marvell10g: add mdix controlRussell King
Add support for controlling the MDI-X state of the PHY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: propagate resolved link config via mac_link_up()Russell King
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phy: marvell10g: read copper results from CSSR1Russell King
Read the copper autonegotiation results from the copper specific status register, rather than decoding the advertisements. Reading what the link is actually doing will allow us to support downshift modes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phy: allow bcm84881 to be a moduleRussell King
Now that the phylib module loading issue has been resolved, we can allow this PHY driver to be built as a module. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: improve initial mac configurationRussell King
Improve the initial MAC configuration so we get a configuration which more represents the final operating mode, in particular with respect to the flow control settings. We do this by: 1) more fully initialising our phy state, so we can use this as the initial state for PHY based connections. 2) reading the fixed link state. 3) ensuring that in-band mode has sane pause settings for SGMII vs 802.3z negotiation modes. In all three cases, we ensure that state->link is false, just in case any MAC drivers have other ideas by mis-using this member, and we also take account of manual pause mode configuration at this point. This avoids MLO_PAUSE_AN being seen in mac_config() when operating in PHY, fixed mode or inband SGMII mode, thereby giving cleaner semantics to the pause flags. As a result of this, the pause flags now indicate in a mode-independent way what is required from a mac_config() implementation. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: allow ethtool -A to change flow control advertisementRussell King
When ethtool -A is used to change the pause modes, the pause advertisement is not being changed, but the documentation in uapi/linux/ethtool.h says we should be. Add that capability to phylink. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: resolve fixed link flow controlRussell King
Resolve the fixed link flow control using the recently introduced linkmode_resolve_pause() helper, which we use in phylink_get_fixed_state() only when operating in full duplex mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: use phylib resolved flow control modesRussell King
Use the new phy_get_pause() helper to get the resolved pause modes for a PHY rather than resolving the pause modes ourselves. We temporarily retain our pause mode resolution for causes where there is no PHY attached, e.g. for fixed-link modes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: ensure manual flow control is selected appropriatelyRussell King
Split the application of manually controlled flow control modes from phylink_resolve_flow(), so that we can use alternative providers of flow control resolution. We also want to clear the MLO_PAUSE_AN flag when autoneg is disabled, since flow control can't be negotiated in this circumstance. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phylink: remove pause mode ethtool setting for fixed linksRussell King
Remove the ability for ethtool -A to change the pause settings for fixed links; if this is really required, we can reinstate it later. Andrew Lunn agrees: "So I think it is safe to not implement ethtool -A, at least until somebody has a real use case for it." Lets avoid making things too complex for use cases that aren't being used. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: add linkmode helper for setting flow control advertisementRussell King
Add a linkmode helper to set the flow control advertisement in an ethtool linkmode mask according to the tx/rx capabilities. This implementation is moved from phylib, and documented with an analysis of its shortcomings. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: add helpers to resolve negotiated flow controlRussell King
Add a couple of helpers to resolve negotiated flow control. Two helpers are provided: - linkmode_resolve_pause() which takes the link partner and local advertisements, and decodes whether we should enable TX or RX pause at the MAC. This is useful outside of phylib, e.g. in phylink. - phy_get_pause(), which returns the TX/RX enablement status for the current negotiation results of the PHY. This allows us to centralise the flow control resolution, rather than spreading it around. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-30net: phy: marvell: initialise link partner state earlierRussell King
Move the initialisation of the link partner state earlier, inside marvell_read_status_page(), so we don't have the same initialisation scattered amongst the other files. This is in a similar place to the genphy implementation, so would result in the same behaviour if a PHY read error occurs. This allows us to get rid of marvell_read_status_page_fixed(), which became a pointless wrapper around genphy_read_status_fixed(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-24net: phy: mdio-bcm-unimac: Fix clock handlingAndre Przywara
The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net: phy: dp83867: w/a for fld detect threshold bootstrapping issueGrygorii Strashko
When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0) will be defaulted to 0x2. This may cause the phy link to be unstable. The new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1. Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when FLD is enabled by bootstrapping as recommended by DM. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phy: sfp-bus.c: get rid of docs warningsMauro Carvalho Chehab
The indentation for the returned values are weird, causing those warnings: ./drivers/net/phy/sfp-bus.c:579: WARNING: Unexpected indentation. ./drivers/net/phy/sfp-bus.c:619: WARNING: Unexpected indentation. Use a list and change the identation for it to be properly parsed by the documentation toolchain. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phy: mdio-mux-bcm-iproc: check clk_prepare_enable() return valueRayagonda Kokatanur
Check clk_prepare_enable() return value. Fixes: 2c7230446bc9 ("net: phy: Add pm support to Broadcom iProc mdio mux driver") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: phy: fix MDIO bus PM PHY resumingHeiner Kallweit
So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03phylink: Improve error message when validate failedHauke Mehrtens
This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: phy: bcm63xx: fix OOPS due to missing driver nameJonas Gorski
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01net: phy: avoid clearing PHY interrupts twice in irq handlerHeiner Kallweit
On all PHY drivers that implement did_interrupt() reading the interrupt status bits clears them. This means we may loose an interrupt that is triggered between calling did_interrupt() and phy_clear_interrupt(). As part of the fix make it a requirement that did_interrupt() clears the interrupt. The Fixes tag refers to the first commit where the patch applies cleanly. Fixes: 49644e68f472 ("net: phy: add callback for custom interrupt handler to struct phy_driver") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: phy: marvell: don't interpret PHY status unless resolvedRussell King
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: mscc: fix firmware pathsAntoine Tenart
The firmware paths for the VSC8584 PHYs not not contain the leading 'microchip/' directory, as used in linux-firmware, resulting in an error when probing the driver. This patch fixes it. Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: corrected the return value for genphy_check_and_restart_aneg and ↵Sudheesh Mavila
genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-23net: phy: Avoid multiple suspendsFlorian Fainelli
It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18net: phy: broadcom: Fix a typo ("firsly")Jonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: phy: restore mdio regs in the iproc mdio driverArun Parameswaran
The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-31net: phy: at803x: disable vddio regulatorMichael Walle
The probe() might enable a VDDIO regulator, which needs to be disabled again before calling regulator_put(). Add a remove() function. Fixes: 2f664823a470 ("net: phy: at803x: add device tree binding") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31net: mii_timestamper: fix static allocation by PHY driverMichael Walle
If phydev->mii_ts is set by the PHY driver, it will always be overwritten in of_mdiobus_register_phy(). Fix it. Also make sure, that the unregister() doesn't do anything if the mii_timestamper was provided by the PHY driver. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-28net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROCScott Branden
Add default MDIO_BCM_IPROC Kconfig setting such that it is default on for IPROC family of devices. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: phy: DP83822: Add support for additional DP83825 devicesDan Murphy
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23phy: dp83826: Add phy IDs for DP83826N and 826NCDan Murphy
Add phy IDs to the DP83822 phy driver for the DP83826N and the DP83826NC devices. The register map and features are the same for basic enablement. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: add new version of phy_do_ioctlHeiner Kallweit
Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: phy: add generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-25 01:45:51 +0000