summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2022-01-12net: phylink: add mac_select_pcs() method to phylink_mac_opsRussell King (Oracle)
mac_select_pcs() allows us to have an explicit point to query which PCS the MAC wishes to use for a particular PHY interface mode, thereby allowing us to add support to validate the link settings with the PCS. Phylink will also use this to select the PCS to be used during a major configuration event without the MAC driver needing to call phylink_set_pcs(). Note that if mac_select_pcs() is present, the supported_interfaces bitmap must be filled in; this avoids mac_select_pcs() being called with PHY_INTERFACE_MODE_NA when we want to get support for all interface types. Phylink will return an error in phylink_create() unless this condition is satisfied. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phy: prefer 1000baseT over 1000baseKXRussell King (Oracle)
The PHY settings table is supposed to be sorted by descending match priority - in other words, earlier entries are preferred over later entries. The order of 1000baseKX/Full and 1000baseT/Full is such that we prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is a lot rarer than 1000baseT/Full, and thus is much less likely to be preferred. This causes phylink problems - it means a fixed link specifying a speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full rather than 1000baseT/Full as would be expected - and since we offer userspace a software emulation of a conventional copper PHY, we want to offer copper modes in preference to anything else. However, we do still want to allow the rarer modes as well. Hence, let's reorder these two modes to prefer copper. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: use legacy_pre_march2020Russell King (Oracle)
Use the legacy flag to indicate whether we should operate in legacy mode. This allows us to stop using the presence of a PCS as an indicator to the age of the phylink user, and make PCS presence optional. Legacy mode involves: 1) calling mac_config() whenever the link comes up 2) calling mac_config() whenever the inband advertisement changes, possibly followed by a call to mac_an_restart() 3) making use of mac_an_restart() 4) making use of mac_pcs_get_state() All the above functionality was moved to a seperate "PCS" block of operations in March 2020. Update the documents to indicate that the differences that this flag makes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: tidy up disable bit clearingRussell King
Tidy up the disable bit clearing where we clear a bit and the run the link resolver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: handle NA interface mode in phylink_fwnode_phy_connect()Russell King (Oracle)
Commit 4904b6ea1f9db ("net: phy: phylink: Use PHY device interface if N/A") introduced handling for the phy interface mode where this is not known at phylink creation time. This was never added to the OF/fwnode paths, but is necessary when the phy is present in DT, but the phy-mode is not specified. Add this handling. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: Add helpers for c22 registers without MDIORussell King (Oracle)
Some devices expose memory-mapped c22-compliant PHYs. Because these devices do not have an MDIO bus, we cannot use the existing helpers. Refactor the existing helpers to allow supplying the values for c22 registers directly, instead of using MDIO to access them. Only get_state and set_adversisement are converted, since they contain the most complex logic. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: add 1000base-KX to phylink_caps_to_linkmodes()Russell King (Oracle)
1000base-KX was missed in phylink_caps_to_linkmodes(), add it. This will be necessary to convert stmmac with xpcs to ensure we don't drop any supported linkmodes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: phylink: add generic validate implementationRussell King (Oracle)
Add a generic validate() implementation using the supported_interfaces and a bitmask of MAC pause/speed/duplex capabilities. This allows us to entirely eliminate many driver private validate() implementations. We expose the underlying phylink_get_linkmodes() function so that drivers which have special needs can still benefit from conversion. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-03Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in ↵Florian Fainelli
__fixed_phy_register" This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") since it prevents any system that uses a fixed PHY without a GPIO descriptor from properly working: [ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY [ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22 [ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY [ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22 Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-24net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_registerMiaoqian Lin
The fixed_phy_get_gpiod function() returns NULL, it doesn't return error pointers, using NULL checking to fix this.i Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20211224021500.10362-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-13net: phy: add a note about refcountingRussell King (Oracle)
Recently, a patch has been submitted to "fix" the refcounting for a DT node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The refcount is passed to the new device. Sadly, coccicheck identifies this location as a leaked refcount, which means we're likely to keep getting patches to "fix" this. However, fixing this will cause breakage. Add a comment to state that the lack of of_node_put() here is intentional. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-07net: phy: Add the missing blank line in the phylink_suspend commentYanteng Si
Fix warning as: Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1657: WARNING: Unexpected indentation. Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1658: WARNING: Block quote ends without a blank line; unexpected unindent. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24net: phylink: Force retrigger in case of latched link-fail indicatorRussell King (Oracle)
On mv88e6xxx 1G/2.5G PCS, the SerDes register 4.2001.2 has the following description: This register bit indicates when link was lost since the last read. For the current link status, read this register back-to-back. Thus to get current link state, we need to read the register twice. But doing that in the link change interrupt handler would lead to potentially ignoring link down events, which we really want to avoid. Thus this needs to be solved in phylink's resolve, by retriggering another resolve in the event when PCS reports link down and previous link was up, and by re-reading PCS state if the previous link was down. The wrong value is read when phylink requests change from sgmii to 2500base-x mode, and link won't come up. This fixes the bug. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24net: phylink: Force link down and retrigger resolve on interface changeRussell King (Oracle)
On PHY state change the phylink_resolve() function can read stale information from the MAC and report incorrect link speed and duplex to the kernel message log. Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell 88E6393X switch: - PHY driver triggers state change due to PHY interface mode being changed from 10gbase-r to 2500base-x due to copper change in speed from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed its interface to the host, or the interrupt about loss of SerDes link hadn't arrived yet (there can be a delay of several milliseconds for this), so we still think that the 10gbase-r mode is up - phylink_resolve() - phylink_mac_pcs_get_state() - this fills in speed=10g link=up - interface mode is updated to 2500base-x but speed is left at 10Gbps - phylink_major_config() - interface is changed to 2500base-x - phylink_link_up() - mv88e6xxx_mac_link_up() - .port_set_speed_duplex() - speed is set to 10Gbps - reports "Link is Up - 10Gbps/Full" to dmesg Afterwards when the interrupt finally arrives for mv88e6xxx, another resolve is forced in which we get the correct speed from phylink_mac_pcs_get_state(), but since the interface is not being changed anymore, we don't call phylink_major_config() but only phylink_mac_config(), which does not set speed/duplex anymore. To fix this, we need to force the link down and trigger another resolve on PHY interface change event. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-04net: phy: fix duplex out of sync problem while changing settingsHeiner Kallweit
As reported by Zhang there's a small issue if in forced mode the duplex mode changes with the link staying up [0]. In this case the MAC isn't notified about the change. The proposed patch relies on the phylib state machine and ignores the fact that there are drivers that uses phylib but not the phylib state machine. So let's don't change the behavior for such drivers and fix it w/o re-adding state PHY_FORCING for the case that phylib state machine is used. [0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/ Fixes: 2bd229df5e2e ("net: phy: remove state PHY_FORCING") Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02net: phy: microchip_t1: add lan87xx_config_rgmii_delay for lan87xx phyYuiko Oshino
Add a function to initialize phy rgmii delay according to phydev->interface. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211101162119.29275-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in the fixes we had queued in case there was another -rc. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29net: phylink: avoid mvneta warning when setting pause parametersRussell King (Oracle)
mvneta does not support asymetric pause modes, and it flags this by the lack of AsymPause in the supported field. When setting pause modes, we check that pause->rx_pause == pause->tx_pause, but only when pause autoneg is enabled. When pause autoneg is disabled, we still allow pause->rx_pause != pause->tx_pause, which is incorrect when the MAC does not support asymetric pause, and causes mvneta to issue a warning. Fix this by removing the test for pause->autoneg, so we always check that pause->rx_pause == pause->tx_pause for network devices that do not support AsymPause. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28net: phy: microchip_t1: add cable test support for lan87xx phyYuiko Oshino
Add a basic cable test (diagnostic) support for lan87xx phy. Tested with LAN8770 for connected/open/short wires using ethtool. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: phy: Fix unsigned comparison with less than zeroJiapeng Chong
Fix the following coccicheck warning: ./drivers/net/phy/at803x.c:493:5-10: WARNING: Unsigned expression compared with zero: value < 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/1635325191-101815-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: phy: fixed warning: Function parameter not describedLuo Jie
Fixed warning: Function parameter or member 'enable' not described in 'genphy_c45_fast_retrain' Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211026102957.17100-1-luoj@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: phylink: use supported_interfaces for phylink validationRussell King (Oracle)
If the network device supplies a supported interface bitmap, we can use that during phylink's validation to simplify MAC drivers in two ways by using the supported_interfaces bitmap to: 1. reject unsupported interfaces before calling into the MAC driver. 2. generate the set of all supported link modes across all supported interfaces (used mainly for SFP, but also some 10G PHYs.) Suggested-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 cdt featureLuo Jie
To perform CDT of qca8081 phy: 1. disable hibernation. 2. force phy working in MDI mode. 3. force phy working in 1000BASE-T mode. 4. configure the related thresholds. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: adjust qca8081 master/slave seed value if link downLuo Jie
1. The master/slave seed needs to be updated when the link can't be created. 2. The case where two qca8081 PHYs are connected each other and master/slave seed is generated as the same value also needs to be considered, so adding this code change into read_status instead of link_change_notify. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 soft_reset and enable master/slave seedLuo Jie
qca8081 phy is a single port phy, configure phy the lower seed value to make it linked as slave mode easier. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 config_initLuo Jie
Add the qca8081 phy driver config_init function, which includes: 1. Enable fast restrain. 2. Add 802.3az configurations. 3. Initialize ADC threshold as 100mv. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add genphy_c45_fast_retrainLuo Jie
Add generic fast retrain auto-negotiation function for C45 PHYs. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 config_anegLuo Jie
Reuse at803x phy driver config_aneg excepting adding 2500M auto-negotiation. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 get_featuresLuo Jie
Reuse the at803x phy driver get_features excepting adding 2500M capability. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 read_statusLuo Jie
1. Separate the function at803x_read_specific_status from the at803x_read_status, since it can be reused by the read_status of qca8081 phy driver excepting adding the 2500M speed. 2. Add the qca8081 read_status function qca808x_read_status. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: add qca8081 ethernet phy driverLuo Jie
qca8081 is a single port ethernet phy chip that supports 10/100/1000/2500 Mbps mode. Add the basic phy driver features, and reuse the at803x phy driver functions. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: at803x: use GENMASK() for speed statusLuo Jie
Use GENMASK() for the current speed value. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: at803x: improve the WOL featureLuo Jie
The wol feature is controlled by the MMD3.8012 bit5, need to set this bit when the wol function is enabled. The reg18 bit0 is for enabling WOL interrupt, when wol occurs, the wol interrupt status reg19 bit0 is set to 1. Call phy_trigger_machine if there are any other interrupt pending in the function set_wol. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: at803x: use phy_modify()Luo Jie
Convert at803x_set_wol to use phy_modify. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCSLuo Jie
Replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS defined in mdio.h. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phy: constify netdev->dev_addr referencesJakub Kicinski
netdev->dev_addr will become a const soon(ish), constify the local variables referring to it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phy: bcm7xxx: Add EPHY entry for 7712Florian Fainelli
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, utilize the recently defined 16nm EPHY macro to configure that PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: phylink: Convert some users of mdiobus_* to mdiodev_*Sean Anderson
This refactors the phylink pcs helper functions to use mdiobus_* instead of mdiodev_*. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20phy: micrel: ksz8041nl: do not use power down modeStefan Agner
Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using the power down mode bit (0.11). If the PHY is taken out of power down mode in a certain temperature range, the PHY enters a weird state which leads to continuously reporting RX errors. In that state, the MAC is not able to receive or send any Ethernet frames and the activity LED is constantly blinking. Since Linux is using the suspend callback when the interface is taken down, ending up in that state can easily happen during a normal startup. Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal clock recovery when using power down mode. Even the latest revision (A4, Revision ID 0x1513) seems to suffer that problem, and according to the errata is not going to be fixed. Remove the suspend/resume callback to avoid using the power down mode completely. [*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19net: phylink: Support disabling autonegotiation for PCSRobert Hancock
The auto-negotiation state in the PCS as set by phylink_mii_c22_pcs_config was previously always enabled when the driver is configured for in-band autonegotiation, even if autonegotiation was disabled on the interface with ethtool. Update the code to set the BMCR_ANENABLE bit based on the interface's autonegotiation enabled state. Update phylink_mii_c22_pcs_get_state to not check autonegotiation-related fields when autonegotiation is disabled. Update phylink_mac_pcs_get_state to initialize the state based on the interface's configured speed, duplex and pause parameters rather than to unknown when autonegotiation is disabled, before calling the driver's pcs_get_state functions, as they are not likely to provide meaningful data for these fields when autonegotiation is disabled. In this case the driver is really just filling in the link state field. Note that in cases where there is a downstream PHY connected, such as with SGMII and a copper PHY, the configuration set by ethtool is handled by phy_ethtool_ksettings_set and not propagated to the PCS. This is correct since SGMII or 1000Base-X autonegotiation with the PCS should normally still be used even if the copper side has disabled it. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19net: phylink: rejig SFP interface selection in ksettings_set()Russell King (Oracle)
Commit ea269a6f7207 ("net: phylink: Update SFP selected interface on advertising changes") added a better solution to selecting the interface mode for SFPs using the advertisement mask. This method will work for mvneta and mvpp2 when selecting between 2500base-X and 1000base-X without needing to use the basex helper, or indicate that we support both 1000base-X and 2500base-X when in either of these two interface modes. Hence, we need to eliminate the validation prior to selecting the interface, otherwise when we clean up mvneta's validation function, we will end up locking to 2500base-X as we validate with an interface mode of PHY_INERFACE_MODE_2500BASEX. The supported mask will already have been reduced down to the union of support for the SFP and MAC already, so we can be confident that the advertisement mask is already appropriately restricted. We only need to select the appropriate interface, and then revalidate with the new interface mode. We get rid of the check for pl->sfp_port too, this is meaningless here as it doesn't get cleared when a module is removed, so it doesn't indicate if a module is present. Just rely on pl->sfp_bus. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: phy: realtek: add support for RTL8365MB-VC internal PHYsAlvin Šipraga
The RTL8365MB-VC ethernet switch controller has 4 internal PHYs for its user-facing ports. All that is needed is to let the PHY driver core pick up the IRQ made available by the switch driver. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14net: phy: dp83867: introduce critical chip default init for non-of platformLay, Kuan Loon
PHY driver dp83867 has rich supports for OF-platform to fine-tune the PHY chip during phy configuration. However, for non-OF platform, certain PHY tunable parameters such as IO impedance and RX & TX internal delays are critical and should be initialized to its default during PHY driver probe. Tested-by: Clement <clement@intel.com> Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com> Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20211013065941.2124858-1-boon.leong.ong@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14net: phy: micrel: make *-skew-ps check more lenientMatthias Schiffer
It seems reasonable to fine-tune only some of the skew values when using one of the rgmii-*id PHY modes, and even when all skew values are specified, using the correct ID PHY mode makes sense for documentation purposes. Such a configuration also appears in the binding docs in Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver should not warn about it. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-12 22:20:42 +0000