summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/debugfs_sta.c
AgeCommit message (Collapse)Author
2024-04-24wifi: ath10k: Fix an error code problem in ↵Su Hui
ath10k_dbg_sta_write_peer_debug_trigger() Clang Static Checker (scan-build) warns: drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3 Value stored to 'ret' is never read. Return 'ret' rather than 'count' when 'ret' stores an error code. Fixes: ee8b08a1be82 ("ath10k: add debugfs support to get per peer tids log via tracing") Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com
2023-11-30wifi: ath10k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath10k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-3-be0b7408cbac@quicinc.com
2022-09-16wifi: ath10k: Fix miscellaneous spelling errorsJeff Johnson
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145300.19223-1-quic_jjohnson@quicinc.com
2019-09-23ath10k: Add peer param map for tlv and non-tlvRakesh Pillai
The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv). Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-07ath10k: Check tx_stats before use itYingying Tang
tx_stats will be freed and set to NULL before debugfs_sta node is removed in station disconnetion process. So if read the debugfs_sta node there may be NULL pointer error. Add check for tx_stats before use it to resove this issue. Signed-off-by: Yingying Tang <yintang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of BW in tx_stats debugfs entrySurabhi Vishnoi
Currently, the bandwidth is updated wrongly in BW table in tx_stats debugfs per sta as there is difference in number of bandwidth type in mac80211 and driver stats table. This leads to bandwidth getting updated at wrong index in bandwidth table in tx_stats. Fix this index mismatch between mac80211 and driver stats table (BW table) by making the number of bandwidth type in driver compatible with mac80211. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: change 'unsigned long int' to 'unsigned long'Kalle Valo
Fixes checkpatch warnings: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ath10k: fix peer stats null pointer dereferenceZhi Chen
There was a race condition in SMP that an ath10k_peer was created but its member sta was null. Following are procedures of ath10k_peer creation and member sta access in peer statistics path. 1. Peer creation: ath10k_peer_create() =>ath10k_wmi_peer_create() =>ath10k_wait_for_peer_created() ... # another kernel path, RX from firmware ath10k_htt_t2h_msg_handler() =>ath10k_peer_map_event() =>wake_up() # ar->peer_map[id] = peer //add peer to map #wake up original path from waiting ... # peer->sta = sta //sta assignment 2. RX path of statistics ath10k_htt_t2h_msg_handler() =>ath10k_update_per_peer_tx_stats() =>ath10k_htt_fetch_peer_stats() # peer->sta //sta accessing Any access of peer->sta after peer was added to peer_map but before sta was assigned could cause a null pointer issue. And because these two steps are asynchronous, no proper lock can protect them. So both peer and sta need to be checked before access. Tested: QCA9984 with firmware ver 10.4-3.9.0.1-00005 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-05ath10k: dump tx stats in rate table formatAnilkumar Kolli
This patch adds the tx statistics pkts/bytes dump in rate table format. Dump format table is similar to http://mcsindex.com/ Tested on QCA9984/QCA4019/QCA988x Firmware: 10.4-3.5.3-00057 10.2.4-1.0-00037 command: cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/ stations/<MACADDR>/tx_stats Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add debugfs support to get power save state change of STAMaharaja Kennadyrajan
This patch helps to get the power save state change of each peer connected to the AP. With WMI_10_4_PEER_STA_PS_STATECHG_EVENTID event, ps state of each peer is reported to user space via debugfs. Use the below command to get the ps state of each sta: cat /sys/kernel/debug/ieee80211/phyX/netdev::wlanX/stations/ XX:XX:XX:XX:XX:XX/peer_ps_state If STA is in power save state, we get the peer_ps_state value as 1. if STA is not in power save state, we get the peer_ps_state value as 0. If ps_state event is disabled, we get the peer_ps_state value as 2. We can enable/disable the ps_state events using the debugfs flag "ps_state_enable" echo Y > /sys/kernel/debug/ieee80211/phyX/ath10k/ps_state_enable Y = 1 to enable and Y = 0 to disable Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00011 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: add debugfs support to dump per sta tx statsAnilkumar Kolli
This patch adds 'tx_stats' in per station debugfs entry. Use this command to dump tx_stats: cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/ stations/<MACADDR>/tx_stats Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27ath10k: fix information leak in debugfsVenkateswara Naralasetty
During write to some of debugfs in ath10k, few variables exposing stack data when process user input. which leads to possible information leak. This patch fix this issue by initializing buffer and checks the return valure of 'simple_write_to_buffer'. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-26ath10k: add sta rx packet stats per tidVasanthakumar Thiagarajan
Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-14ath10k: remove MAC80211_DEBUGFS dependency on ath10k_sta_statisticsAnilkumar Kolli
Remove CONFIG_MAC80211_DEBUGFS dependency on ath10k_sta_statistics(). ath10k_sta_statistics() has per sta tx/rx stats and this should not be dependent on MAC80211_DEBUGFS. No changes in functionality. Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05ath10k: use octal permission representationMarcin Rokicki
Fix output from checkpatch.pl like: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'. Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: add debugfs support to get per peer tids log via tracingMaharaja Kennadyrajan
This patch provides support to get per peer tids log. echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/ XX:XX/peer_debug_trigger These logs will be the part of FWLOGS which we collect the logs via tracing interface. Here we will get the peer tigd logs only once(not repeatedly) when we write 1 to the debugfs file. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-11-23ath10k: add support for per sta tx bitrateAnilkumar Kolli
Per STA tx bitrate info is filled from peer stats. Export per sta txrate info to cfg80211/nl80211 Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-08ath10k: remove debugfs support for Per STA total rx durationMohammed Shafi Shajakhan
cfg80211/nl80211 interface changes for per STA total rx-duration and very basic 'ath10k_sta_statistics' mac80211 callback is implemented to extend support for per station statistics from the driver. Also provision in 'iw dev wlan#N station dump' to parse rx-duration is supported. So its safer to remove the debugfs entry for per STA rx-duration Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-08ath10k: add support for ath10k_sta_statistics supportMohammed Shafi Shajakhan
Enable support for 'drv_sta_statistics' callback. Export rx_duration support if available to cfg80211/nl80211 This can also act as a placeholder for any new per STA stats support Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-08ath10k: fix 10.4 extended peer stats updateMohammed Shafi Shajakhan
10.4 'extended peer stats' will be not be appended with normal peer stats data and they shall be coming in separate chunks. Fix this by maintaining a separate linked list 'extender peer stats' for 10.4 and update rx_duration for per station statistics. Also parse through beacon filter (if enabled), to make sure we parse the extended peer stats properly. This issue was exposed when more than one client is connected and extended peer stats for 10.4 is enabled The order for the stats is as below S - standard peer stats, E- extended peer stats, B - beacon filter stats {S1, S2, S3..} -> {B1, B2, B3..}(if available) -> {E1, E2, E3..} Fixes: f9575793d44c ("ath10k: enable parsing per station rx duration for 10.4") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26ath10k: add debugfs support for Per STA total rx durationMohammed Shafi Shajakhan
Add debugfs support for per client total rx duration, track this via the report of Peer stats rx duration reported for every 500ms Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-13ath10k: add support to send delbaRajkumar Manoharan
This per-station debugfs entry helps to send delba in manual mode for debugging purpose. It accepts tid, initiator and reason code as inputs. To send delba, echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/delba Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-13ath10k: add support to send addba responseRajkumar Manoharan
This per-station debugfs entry helps to send addba response in manual mode for debugging purpose. It accepts tid and status code as input arguments. To send addba response, echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba_resp Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-13ath10k: add support to send addba requestRajkumar Manoharan
This per-station debugfs entry helps to send addba request in manual mode. Need to pass two configuration parameters (tid, buffer size) as input. To send addba, echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/addba Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-13ath10k: Implement sta_add_debugfsRajkumar Manoharan
Add per station debugfs files when a station is added to mac80211's station list. This helps to group peer specific debugfs entries altogether. Right now this callback adds support to test aggregation procedures (addba/addba_resp/delba) manually. To enable automatic aggregation in target, echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode For manual mode, echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/ stations/XX:XX:XX:XX:XX:XX/aggr_mode Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-06-13 20:32:16 +0000