summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/htc.h
AgeCommit message (Collapse)Author
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: migrate to mac80211 txq schedulingToke Høiland-Jørgensen
ath10k maintains common txqs list for all stations. This txq management can be removed by migrating to mac80211 txq APIs and let mac80211 handle txqs reordering based on reported airtime. By doing this, txq fairness maintained in ath10k i.e processing N frames per txq is removed. By adapting to mac80211 APIs, ath10k will support mac80211 based airtime fairness algorithm. Tested on QCA4019 with firmware version 10.4-3.2.1.1-00015 Tested on QCA9984 with firmware version 10.4-3.9.0.1-00005 Tested-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02ath10k: sdio: allocate correct size for RECV_1MORE_BLOCK rx packetsAlagu Sankar
Without this, when receiving a packet that has this flag set from firmware, we will read invalid trailer data from the packet, which will be shown as various errors, e.g. "sdio mbox lookahead is zero" or "invalid rx packet" or "payload length x exceeds max htc length". Co-Developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-28ath10k: replace hardcoded constant with defineErik Stromdahl
The hardcoded values used in ath10k_mac_tx_push_pending and ath10k_mac_op_wake_tx_queue set an upper limit of how many packets that can be consumed from the TX queue. HTC_HOST_MAX_MSG_PER_TX_BUNDLE is a proper name for this constant, as the value effectively limits the number of messages that can be consumed in one step. Thus, the value is an upper limit of the number of messages that can be added to a TX message bundle. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-28ath10k: rename HTC_HOST_MAX_MSG_PER_BUNDLE defineErik Stromdahl
This define is only used for RX bundling so it is more descriptive if RX is added to the define-name. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19ath10k: add HTC services for WCN3990Govind Singh
WCN3990 target uses 3 Copy engine(CE1/CE9/CE10) in RX path and CE 11 for pktlog. Add data path HTC ep services and PKTLOG services for WCN3990. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: ready_ext msg supportErik Stromdahl
Added support for extended ready message. The extended ready message contains the maximum bundle count supported by SDIO chipsets. It is transmitted by SDIO chipset only and replaces the "standard" ready message in this case. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: rx trailer lookahead supportErik Stromdahl
The RX trailer parsing is now capable of parsing lookahead reports. A lookahead contains the first 4 bytes of the next HTC message (that will be read in the next SDIO read operation). Lookaheads are used by the SDIO/mbox HIF layer to determine if the next message is part of a bundle, which endpoint it belongs to and how long it is. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-04ath10k: htc: made static function publicErik Stromdahl
Changed ath10k_htc_notify_tx_completion and ath10k_htc_process_trailer from static to non static. These functions are needed by SDIO/mbox. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath10k: htc: simplified credit distributionErik Stromdahl
Simplified transmit credit distribution code somewhat. Since the WMI control service will get assigned all credits there is no need for having a credit_allocation array in struct ath10k_htc. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath10k: htc: removal of unused struct membersErik Stromdahl
Removed tx_credits_per_max_message and tx_credit_size from struct ath10k_htc_ep since they are not used anywhere in the code. They are just written, never read. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-07-08ath10k: remove unused <linux/semaphore.h>Chaehyun Lim
<linux/semaphore.h> is not used anymore, so just remove the include. Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: fix checkpatch warnings related to spacesKalle Valo
Fix checkpatch warnings about use of spaces with operators: spaces preferred around that '*' (ctx:VxV) This has been recently added to checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-16ath10k: remove htc polling for tx completionRajkumar Manoharan
Since polling for tx completion is handled whenever target to host messages are received, removing the unnecessary polling mechanism for send completion at HTC level. Reviewed-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-16ath10k: remove unused dl_is_polledRajkumar Manoharan
Since polling for received messages not supported, remove unused dl_is_polled. Reviewed-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-16ath10k: register per copy engine receive callbacksRajkumar Manoharan
Register receive callbacks for every copy engines (CE) separately instead of having common receive handler. Some of the copy engines receives different type of messages (i.e HTT/HTC/pktlog) from target. Hence to service them accordingly, register per copy engine receive callbacks. Reviewed-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-16ath10k: register per copy engine send completion callbacksRajkumar Manoharan
Register send completion callbacks for every copy engines (CE) separately instead of having common completion handler. Since some of the copy engines delivers different type of messages, per-CE callbacks help to service them differently. Reviewed-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-16ath10k: export htc tx rx handlersRajkumar Manoharan
Export HTC layer tx and rx handlers. This will be used by HIF layer for per-CE data processing. Instead of callback mechanism, HIF will call appropriate upper layers API directly. Reviewed-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18ath10k: fix use of multiple blank linesKalle Valo
Fixes checkpatch warnings: CHECK: Please don't use multiple blank lines Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-26ath10k: improve logging to include dev idMichal Kazior
This makes it a lot easier to log and debug messages if there's more than 1 ath10k device on a system. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-12ath10k: remove htc->stoppedMichal Kazior
This is not necessary anymore. There are no more uncontrolled htc tx entry points. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-16ath10k: simplify HTC command submittingMichal Kazior
The patch removes HTC endpoint tx workers in favour of direct command submission. This makes a lot more sense for data path. mac80211 queues are effectively stopped/woken up in a more timely fashion preventing build up of frames. It's possible to push more traffic than the device/system is able to handle and have no hiccups or performance degradation with UDP traffic. WMI commands will now report errors properly and possibly block as they actively can wait for tx credits to become available. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-16ath10k: add HTC TX credits replenishing notificationMichal Kazior
This will allow higher layers to anticipate and act upon TX credits renewal. This will be important for some future rework of WMI command submission. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-07-30ath10k: prevent HTC from being used after stoppingMichal Kazior
It was possible to submit new HTC commands after/while HTC stopped. This led to memory corruption in some rare cases. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-07-30ath10k: embed HTC struct inside ath10kMichal Kazior
This reduces number of allocations and simplifies memory managemnt. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devicesKalle Valo
Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2024-06-09 00:50:16 +0000