summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/sdio.c
AgeCommit message (Collapse)Author
2024-10-16wifi: ath10k: avoid NULL pointer error during sdio removeKang Yang
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Tested-by: David Ruth <druth@chromium.org> Reviewed-by: David Ruth <druth@chromium.org> Link: https://patch.msgid.link/20241008022246.1010-1-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-05-16Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Increase the timeout period of the ACMD41 command - Add card entry for quirks to debugfs - Add mmc_gpiod_set_cd_config() function - Store owner from SDIO modules with sdio_register_driver() MMC host: - atmel-mci: Some cleanups and a switch to use dev_err_probe() - renesas_sdhi: - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants - Set the SDBUF after reset - sdhci: Add support for "Tuning Error" interrupts - sdhci-acpi: - Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA - Disable write protect detection on Toshiba WT10-A - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working - sdhci_am654: - Re-work and fix the tuning support for multiple speed-modes - Add tuning algorithm for delay chain - sdhci-esdhc-imx: Add NXP S32G3 support - sdhci-of-dwcmshc: - Add tuning support for Sophgo CV1800B and SG200X - Implement SDHCI CQE support - sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes" MEMSTICK: - Convert a couple of drivers to use the ->remove_new() callback" * tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list mmc: renesas_sdhi: Set the SDBUF after reset mmc: core: Increase the timeout period of the ACMD41 command mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too mmc: atmel-mci: Switch to use dev_err_probe() mmc: atmel-mci: Incapsulate used to be a platform data into host structure mmc: atmel-mci: Replace platform device pointer by generic one mmc: atmel-mci: Use temporary variable for struct device mmc: atmel-mci: Get rid of platform data leftovers mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning mmc: sdhci-s3c: Choose sdhci_ops based on variant mmc: sdhci_am654: Constify struct sdhci_ops mmc: sdhci-sprd: Constify struct sdhci_ops mmc: sdhci-omap: Constify struct sdhci_ops mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops mmc: slot-gpio: Use irq_handler_t type mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA ...
2024-04-24wifi: ath10k: allocate dummy net_device dynamicallyBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath10k by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at ath10k_core_create(). The free of the device occurs at ath10k_core_destroy(). [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04wifi: ath10k: sdio: drop driver owner initializationKrzysztof Kozlowski
Core in sdio_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-4-ae46d6b955eb@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04wifi: ath10k: sdio: simplify module initializationKrzysztof Kozlowski
This driver's initialization functions do not perform any custom code, except printing messages. Printing messages on modules loading/unloading is discouraged because it pollutes the dmesg regardless whether user actually has this device. Core kernel code already gives tools to investigate whether module was loaded or not. Drop the printing messages which allows to replace open-coded module_sdio_driver(). Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-3-ae46d6b955eb@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-11-30wifi: ath10k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath10k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-3-be0b7408cbac@quicinc.com
2023-08-23wifi: ath10k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-1-8e2698759564@quicinc.com
2022-09-30Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16wifi: ath10k: Fix miscellaneous spelling errorsJeff Johnson
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145300.19223-1-quic_jjohnson@quicinc.com
2022-05-03Merge tag 'wireless-next-2022-05-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.19 First set of patches for v5.19 and this is a big one. We have two new drivers, a change in mac80211 STA API affecting most drivers and ath11k getting support for WCN6750. And as usual lots of fixes and cleanups all over. Major changes: new drivers - wfx: silicon labs devices - plfxlc: pureLiFi X, XL, XC devices mac80211 - host based BSS color collision detection - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support rtw88 - support TP-Link T2E devices rtw89 - support firmware crash simulation - preparation for 8852ce hardware support ath11k - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support for QCA6390 and WCN6855 - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - support for WCN6750 wcn36xx - support for transmit rate reporting to user space * tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits) rtw89: 8852c: rfk: add DPK rtw89: 8852c: rfk: add IQK rtw89: 8852c: rfk: add RX DCK rtw89: 8852c: rfk: add RCK rtw89: 8852c: rfk: add TSSI rtw89: 8852c: rfk: add LCK rtw89: 8852c: rfk: add DACK rtw89: 8852c: rfk: add RFK tables plfxlc: fix le16_to_cpu warning for beacon_interval rtw88: remove a copy of the NAPI_POLL_WEIGHT define carl9170: tx: fix an incorrect use of list iterator wil6210: use NAPI_POLL_WEIGHT for napi budget ath10k: remove a copy of the NAPI_POLL_WEIGHT define ath11k: Add support for WCN6750 device ath11k: Datapath changes to support WCN6750 ath11k: HAL changes to support WCN6750 ath11k: Add QMI changes for WCN6750 ath11k: Fetch device information via QMI for WCN6750 ath11k: Add register access logic for WCN6750 ath11k: Add HW params for WCN6750 ... ==================== Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-02ath10k: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429174643.196994-3-kuba@kernel.org
2022-04-08mmc: core: improve API to make clear mmc_hw_reset is for cardsWolfram Sang
To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-13wireless: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
2021-09-28ath10k: sdio: Add missing BH locking around napi_schdule()Fabio Estevam
On a i.MX-based board with a QCA9377 Wifi chip, the following errors are seen after launching the 'hostapd' application: hostapd /etc/wifi.conf Configuration file: /etc/wifi.conf wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid" IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: interface state COUNTRY_UPDATE->ENABLED wlan0: AP-ENABLED NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! ... Fix this problem by adding the BH locking around napi-schedule(), in the same way it was done in commit e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()"). Its commit log provides the following explanation: "It's not correct to call napi_schedule() in pure process context. Because we use __raise_softirq_irqoff() we require callers to be in a context which will eventually lead to softirq handling (hardirq, bh disabled, etc.). With code as is users will see: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! " Fixes: cfee8793a74d ("ath10k: enable napi on RX path for sdio") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824144339.2796122-1-festevam@denx.de
2020-12-17ath10k: prevent deinitializing NAPI twiceWen Gong
It happened "Kernel panic - not syncing: hung_task: blocked tasks" when test simulate crash and ifconfig down/rmmod meanwhile. Test steps: 1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC. echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci 2. dmesg: [ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash [ 5622.655995] ieee80211 phy0: Hardware restart was requested [ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds. [ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds. [ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks [ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G W 4.19.86 #137 [ 5776.359846] Hardware name: MediaTek krane sku176 board (DT) [ 5776.359855] Call trace: [ 5776.359868] dump_backtrace+0x0/0x170 [ 5776.359881] show_stack+0x20/0x2c [ 5776.359896] dump_stack+0xd4/0x10c [ 5776.359916] panic+0x12c/0x29c [ 5776.359937] hung_task_panic+0x0/0x50 [ 5776.359953] kthread+0x120/0x130 [ 5776.359965] ret_from_fork+0x10/0x18 [ 5776.359986] SMP: stopping secondary CPUs [ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000 [ 5776.360026] CPU features: 0x0,2188200c [ 5776.360035] Memory Limit: none command "ifconfig wlan0 down" or "rmmod ath10k_sdio" will be blocked callstack of ifconfig: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x24c/0x294 [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] __dev_change_flags+0xe0/0x1d0 [<0>] dev_change_flags+0x30/0x6c [<0>] devinet_ioctl+0x370/0x564 [<0>] inet_ioctl+0xdc/0x304 [<0>] sock_do_ioctl+0x50/0x288 [<0>] compat_sock_ioctl+0x1b4/0x1aac [<0>] __se_compat_sys_ioctl+0x100/0x26fc [<0>] __arm64_compat_sys_ioctl+0x20/0x2c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff callstack of rmmod: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x294/0x31c [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] dev_close_many+0x70/0x100 [<0>] dev_close+0x4c/0x80 [<0>] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211] [<0>] ieee80211_remove_interfaces+0x58/0x1a0 [mac80211] [<0>] ieee80211_unregister_hw+0x40/0x100 [mac80211] [<0>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [<0>] ath10k_core_unregister+0x38/0x7c [ath10k_core] [<0>] ath10k_sdio_remove+0x8c/0xd0 [ath10k_sdio] [<0>] sdio_bus_remove+0x48/0x108 [<0>] device_release_driver_internal+0x138/0x1ec [<0>] driver_detach+0x6c/0xa8 [<0>] bus_remove_driver+0x78/0xa8 [<0>] driver_unregister+0x30/0x50 [<0>] sdio_unregister_driver+0x28/0x34 [<0>] cleanup_module+0x14/0x6bc [ath10k_sdio] [<0>] __arm64_sys_delete_module+0x1e0/0x22c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff SNOC: [ 647.156863] Call trace: [ 647.162166] [<ffffff80080855a4>] __switch_to+0x120/0x13c [ 647.164512] [<ffffff800899d8b8>] __schedule+0x5ec/0x798 [ 647.170062] [<ffffff800899dad8>] schedule+0x74/0x94 [ 647.175050] [<ffffff80089a0848>] schedule_timeout+0x314/0x42c [ 647.179874] [<ffffff80089a0a14>] schedule_timeout_uninterruptible+0x34/0x40 [ 647.185780] [<ffffff80082a494>] msleep+0x28/0x38 [ 647.192546] [<ffffff800117ec4c>] ath10k_snoc_hif_stop+0x4c/0x1e0 [ath10k_snoc] [ 647.197439] [<ffffff80010dfbd8>] ath10k_core_stop+0x50/0x7c [ath10k_core] [ 647.204652] [<ffffff80010c8f48>] ath10k_halt+0x114/0x16c [ath10k_core] [ 647.211420] [<ffffff80010cad68>] ath10k_stop+0x4c/0x88 [ath10k_core] [ 647.217865] [<ffffff8000fdbf54>] drv_stop+0x110/0x244 [mac80211] [ 647.224367] [<ffffff80010147ac>] ieee80211_stop_device+0x48/0x54 [mac80211] [ 647.230359] [<ffffff8000ff3eec>] ieee80211_do_stop+0x6a4/0x73c [mac80211] [ 647.237033] [<ffffff8000ff4500>] ieee80211_stop+0x20/0x30 [mac80211] [ 647.243942] [<ffffff80087e39b8>] __dev_close_many+0xa0/0xfc [ 647.250435] [<ffffff80087e3888>] dev_close_many+0x70/0x100 [ 647.255651] [<ffffff80087e3a60>] dev_close+0x4c/0x80 [ 647.261244] [<ffffff8000f1ba54>] cfg80211_shutdown_all_interfaces+0x44/0xcc [cfg80211] [ 647.266383] [<ffffff8000ff3fdc>] ieee80211_remove_interfaces+0x58/0x1b4 [mac80211] [ 647.274128] [<ffffff8000fda540>] ieee80211_unregister_hw+0x50/0x120 [mac80211] [ 647.281659] [<ffffff80010ca314>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [ 647.288839] [<ffffff80010dfc94>] ath10k_core_unregister+0x48/0x90 [ath10k_core] [ 647.296027] [<ffffff800117e598>] ath10k_snoc_remove+0x5c/0x150 [ath10k_snoc] [ 647.303229] [<ffffff80085625fc>] platform_drv_remove+0x28/0x50 [ 647.310517] [<ffffff80085601a4>] device_release_driver_internal+0x114/0x1b8 [ 647.316257] [<ffffff80085602e4>] driver_detach+0x6c/0xa8 [ 647.323021] [<ffffff800855e5b8>] bus_remove_driver+0x78/0xa8 [ 647.328571] [<ffffff800856107c>] driver_unregister+0x30/0x50 [ 647.334213] [<ffffff8008562674>] platform_driver_unregister+0x1c/0x28 [ 647.339876] [<ffffff800117fefc>] cleanup_module+0x1c/0x120 [ath10k_snoc] [ 647.346196] [<ffffff8008143ab8>] SyS_delete_module+0x1dc/0x22c PCIe: [ 615.392770] rmmod D 0 3523 3458 0x00000080 [ 615.392777] Call Trace: [ 615.392784] __schedule+0x617/0x7d3 [ 615.392791] ? __mod_timer+0x263/0x35c [ 615.392797] schedule+0x62/0x72 [ 615.392803] schedule_timeout+0x8d/0xf3 [ 615.392809] ? run_local_timers+0x6b/0x6b [ 615.392814] msleep+0x1b/0x22 [ 615.392824] ath10k_pci_hif_stop+0x68/0xd6 [ath10k_pci] [ 615.392844] ath10k_core_stop+0x44/0x67 [ath10k_core] [ 615.392859] ath10k_halt+0x102/0x153 [ath10k_core] [ 615.392873] ath10k_stop+0x38/0x75 [ath10k_core] [ 615.392893] drv_stop+0x9a/0x13c [mac80211] [ 615.392915] ieee80211_do_stop+0x772/0x7cd [mac80211] [ 615.392937] ieee80211_stop+0x1a/0x1e [mac80211] [ 615.392945] __dev_close_many+0x9e/0xf0 [ 615.392952] dev_close_many+0x62/0xe8 [ 615.392958] dev_close+0x54/0x7d [ 615.392975] cfg80211_shutdown_all_interfaces+0x6e/0xa5 [cfg80211] [ 615.393021] ieee80211_remove_interfaces+0x52/0x1aa [mac80211] [ 615.393049] ieee80211_unregister_hw+0x54/0x136 [mac80211] [ 615.393068] ath10k_mac_unregister+0x19/0x4a [ath10k_core] [ 615.393091] ath10k_core_unregister+0x39/0x7e [ath10k_core] [ 615.393104] ath10k_pci_remove+0x3d/0x7f [ath10k_pci] [ 615.393117] pci_device_remove+0x41/0xa6 [ 615.393129] device_release_driver_internal+0x123/0x1ec [ 615.393140] driver_detach+0x60/0x90 [ 615.393152] bus_remove_driver+0x72/0x9f [ 615.393164] pci_unregister_driver+0x1e/0x87 [ 615.393177] SyS_delete_module+0x1d7/0x277 [ 615.393188] do_syscall_64+0x6b/0xf7 [ 615.393199] entry_SYSCALL_64_after_hwframe+0x41/0xa6 The test command run simulate_fw_crash firstly and it call into ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable is called and bit NAPI_STATE_SCHED is set. After that, function ath10k_sdio_hif_stop is called again from ath10k_stop by command "ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked. It is blocked by napi_synchronize, napi_disable will set bit with NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop becuase bit NAPI_STATE_SCHED is set by napi_disable. function of napi_synchronize static inline void napi_synchronize(const struct napi_struct *n) { if (IS_ENABLED(CONFIG_SMP)) while (test_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); else barrier(); } function of napi_disable void napi_disable(struct napi_struct *n) { might_sleep(); set_bit(NAPI_STATE_DISABLE, &n->state); while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) msleep(1); hrtimer_cancel(&n->timer); clear_bit(NAPI_STATE_DISABLE, &n->state); } Add flag for it avoid the hang and crash. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Tested-on: WCN3990 hw1.0 SNOC hw1.0 WLAN.HL.3.1-01307.1-QCAHLSWMTPL-2 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598617348-2325-1-git-send-email-wgong@codeaurora.org
2020-12-12ath10k: add atomic protection for device recoveryWen Gong
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-07ath10k: fix a check patch warning returnNonBoolInBooleanFunction of sdio.cWen Gong
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <rong.a.chen@intel.com> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606103240-9868-1-git-send-email-wgong@codeaurora.org
2020-11-07ath10k: cancel rx worker in hif_stop for SDIOWen Gong
The rx worker of SDIO should be cancelled after disable interrupt, and release rx sk_buff in queue, otherwise the rx worker maybe still run after hif_stop. And it should be cancelled before napi_synchronize in hif_stop, because the rx worker of SDIO will call napi_schedule, it should have no napi_schedule before napi_synchronize, otherwise it lead napi_synchronize wait untill napi_complete. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604558036-4056-1-git-send-email-wgong@codeaurora.org
2020-11-06ath10k: sdio: remove redundant check in for loopAlex Dewar
The for loop checks whether cur_section is NULL on every iteration, but we know it can never be NULL as there is another check towards the bottom of the loop body. Refactor to avoid this unnecessary check. Also, increment the variable i inline for clarity Addresses-Coverity: 1496984 ("Null pointer dereferences) Suggested-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200916165748.20927-1-alex.dewar90@gmail.com
2020-10-28ath10k: remove repeated words in commentsKalle Valo
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603802288-21158-1-git-send-email-kvalo@codeaurora.org
2020-08-19ath10k: sdio: add firmware coredump supportWen Gong
When firmware crashes it's possible to create a coredump for later analysis, add support to collect the register and memory info from SDIO devices. The coredump configuration is different between QCA6174 PCI and QCA6174 SDIO, so add specific registers and memory regions for the latter. QCA6174 SDIO has two methods to dump the firmware: fastdump and slowdump. Fastdump is not supported in olded versions of firmware, and for these ath10k will automatically select slowdump. If firmware supports fastdump, ath10k will automatically select it. QCA6174 SDIO firmware version WLAN.RMH.4.4.1-00017-QCARMSWPZ-2 is the first version supporting fastdump. For slowdump, ath10k_sdio_hif_diag_read() can not be used as the diag window has a limit value, it is 4 bytes and the dump's buffer length is larger than it, it will trigger error. So this patch adds ath10k_sdio_read_mem() to read 4 bytes for each time. Example output of a firmware crash: ath10k_sdio mmc1:0001:1: simulating soft firmware crash ath10k_sdio mmc1:0001:1: firmware crashed! (guid 413d98b1-84c0-4298-b605-2b10ec0c54a5) ath10k_sdio mmc1:0001:1: qca6174 hw3.2 sdio target 0x05030000 chip_id 0x00000000 sub 0000:0000 ath10k_sdio mmc1:0001:1: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 1 ath10k_sdio mmc1:0001:1: firmware ver WLAN.RMH4.4.1-00126-QCARMSWP-1 api 6 features wowlan,ignore-otp,raw-mode crc32 b84317cf ath10k_sdio mmc1:0001:1: board_file api 2 bmi_id 0:4 crc32 6364cfcc ath10k_sdio mmc1:0001:1: htt-ver 3.69 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 ath10k_sdio mmc1:0001:1: firmware register dump: ath10k_sdio mmc1:0001:1: [00]: 0x05030000 0x000015B3 0x0099908D 0x00955B31 ath10k_sdio mmc1:0001:1: [04]: 0x0099908D 0x00060730 0x00000018 0x004641A0 ath10k_sdio mmc1:0001:1: [08]: 0x0041FAA4 0x0041FA9C 0x00999070 0x00404490 ath10k_sdio mmc1:0001:1: [12]: 0x00000009 0xFFFFFFFF 0x00952CD0 0x00952CE6 ath10k_sdio mmc1:0001:1: [16]: 0x00952CC4 0x00910712 0x00000000 0x00000000 ath10k_sdio mmc1:0001:1: [20]: 0x4099908D 0x0040E9E8 0x00000001 0x00423AC0 ath10k_sdio mmc1:0001:1: [24]: 0x809F3189 0x0040EA48 0x00426240 0xC099908D ath10k_sdio mmc1:0001:1: [28]: 0x809143A7 0x0040EA68 0x0041FAA4 0x00423A80 ath10k_sdio mmc1:0001:1: [32]: 0x809F1193 0x0040EA88 0x00411770 0x004117E0 ath10k_sdio mmc1:0001:1: [36]: 0x809F0EEE 0x0040EAA8 0x00000000 0x00000000 ath10k_sdio mmc1:0001:1: [40]: 0x80911210 0x0040EAC8 0x00000008 0x00404130 ath10k_sdio mmc1:0001:1: [44]: 0x80911154 0x0040EB28 0x00400000 0x00000000 ath10k_sdio mmc1:0001:1: [48]: 0x8091122D 0x0040EB48 0x00000000 0x00400600 ath10k_sdio mmc1:0001:1: [52]: 0x40910024 0x0040EB78 0x0040AB98 0x0040AB98 ath10k_sdio mmc1:0001:1: [56]: 0x00000000 0x0040EB98 0x009BB001 0x00040020 Tested-on: QCA6174 SDIO WLAN.RMH.4.4.1-00018-QCARMSWP-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1569310030-834-3-git-send-email-wgong@codeaurora.org
2020-08-14ath10k: start recovery process when payload length exceeds max htc length ↵Wen Gong
for sdio When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. It happened payload length exceeds max htc length. [ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 .... [ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan. [ 269.229232] ieee80211 phy0: Hardware restart was requested [ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer. Start recovery when it happened "payload length exceeds max htc length" will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-29mmc: sdio: Move SDIO IDs from ath10k driver to common include filePali Rohár
Also replace generic MANUFACTURER macros by proper SDIO IDs macros. Checks for device IDs are slightly modified to use SDIO device IDs. This allows removal of all custom MANUFACTURER macros from ath10k. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-9-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-04-21ath10k: hif: make send_complete_check op optionalKalle Valo
That way we don't need to have an empty function in sdio.c. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587037859-28873-5-git-send-email-kvalo@codeaurora.org
2020-04-21ath10k: sdio: remove _hif_ prefix from functions not part of hif interfaceKalle Valo
The _hif_ prefix should be used only on functions part of ath10k_hif_ops, so remove it from functions which should not have it. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587037859-28873-4-git-send-email-kvalo@codeaurora.org
2020-04-21ath10k: improve power save performance for sdioWen Gong
This patch is to set register to allow the mbox enter sleep status if it does not have tx traffic and wakeup it if tx traffic arrive. After mbox enter sleep status, the soc will enter sleep status by firmware, this will save power. The power consume drops from about 90mW to about 10mW with this patch. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587037859-28873-3-git-send-email-kvalo@codeaurora.org
2020-04-21ath10k: rename ath10k_hif_swap_mailbox() to ath10k_hif_start_post()Kalle Valo
Convert ath10k_hif_swap_mailbox() to a more generic op so that bus drivers can do more than just swap the mailbox, for example set power save settings like in the following sdio patch. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587037859-28873-2-git-send-email-kvalo@codeaurora.org
2020-04-15ath10k: Fix typo in warning messagesMamatha Telu
Fix some typo: s/fnrom/from s/pkgs/pkts/ s/AMSUs/AMSDUs/ Signed-off-by: Mamatha Telu <telumamatha36@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1586715875-5182-1-git-send-email-telumamatha36@gmail.com
2020-04-09ath10k: disable TX complete indication of htt for sdioWen Gong
For sdio chip, it is high latency bus, all the TX packet's content will be tranferred from HOST memory to firmware memory via sdio bus, then it need much more memory in firmware than low latency bus chip, for low latency chip, such as PCI-E, it only need to transfer the TX descriptor via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of TX logic will help TX efficiency since its memory is limited, and it will reduce the TX circle's time of each packet and then firmware will have more memory for TX since TX complete also need memeory. This patch disable TX complete indication from firmware for htt data packet, it will not have TX complete indication from firmware to ath10k. It will cut the cost of bus bandwidth of TX complete and make the TX logic of firmware simpler, it results in significant performance improvement on TX path. Udp TX throughout is 130Mbps without this patch, and it arrives 400Mbps with this patch. The downside of this patch is the command "iw wlan0 station dump" will show 0 for "tx retries" and "tx failed" since all tx packet's status is success. This patch only effect sdio chip, it will not effect PCI, SNOC etc. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200212080415.31265-2-wgong@codeaurora.org
2020-03-11ath10k: use kzalloc to read for ath10k_sdio_hif_diag_readWen Gong
When use command to read values, it crashed. command: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233)) It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4. Then system crash: [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000 [ 1786.013273] Mem abort info: [ 1786.013281] ESR = 0x96000045 [ 1786.013291] Exception class = DABT (current EL), IL = 32 bits [ 1786.013299] SET = 0, FnV = 0 [ 1786.013307] EA = 0, S1PTW = 0 [ 1786.013314] Data abort info: [ 1786.013322] ISV = 0, ISS = 0x00000045 [ 1786.013330] CM = 0, WnR = 1 [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000 [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6) [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137 [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT) [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 1786.013662] pc : __memcpy+0x94/0x180 [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150 [ 1786.013686] sp : ffffff8008003c60 [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80 [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8 [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001 [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4 [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000 [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020 [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000 [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0 [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000 [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000 [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000 [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000 [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000 [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004 [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000 [ 1786.013891] Call trace: [ 1786.013903] __memcpy+0x94/0x180 [ 1786.013914] unmap_single+0x6c/0x84 [ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80 [ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 1786.013952] msdc_unprepare_data+0x6c/0x84 [ 1786.013963] msdc_request_done+0x58/0x84 [ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8 [ 1786.013985] msdc_irq+0x12c/0x17c [ 1786.013996] __handle_irq_event_percpu+0xe4/0x250 [ 1786.014006] handle_irq_event_percpu+0x28/0x68 [ 1786.014015] handle_irq_event+0x48/0x78 [ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0 [ 1786.014039] __handle_domain_irq+0x84/0xc4 [ 1786.014050] gic_handle_irq+0x124/0x1a4 [ 1786.014059] el1_irq+0xb0/0x128 [ 1786.014072] cpuidle_enter_state+0x298/0x328 [ 1786.014082] cpuidle_enter+0x30/0x40 [ 1786.014094] do_idle+0x190/0x268 [ 1786.014104] cpu_startup_entry+0x24/0x28 [ 1786.014116] rest_init+0xd4/0xe0 [ 1786.014126] start_kernel+0x30c/0x38c [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3) [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]--- [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt [ 1786.015433] SMP: stopping secondary CPUs [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000 [ 1786.015458] CPU features: 0x0,2188200c [ 1786.015466] Memory Limit: none For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-11ath10k: start recovery process when read int status fail for sdioWen Gong
When running simulate crash stress test, it happened "failed to read from address 0x800: -110". Test steps: 1. Run command continuous echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash 2. error happened and it did not begin recovery for long time. [74377.334846] ath10k_sdio mmc1:0001:1: simulating soft firmware crash [74378.378217] ath10k_sdio mmc1:0001:1: failed to read from address 0x800: -110 [74378.378371] ath10k_sdio mmc1:0001:1: failed to process pending SDIO interrupts: -110 It has sdio errors since it can not read MBOX_HOST_INT_STATUS_ADDRESS, then it has to do recovery process to recovery ath10k. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-11ath10k: fix few checkpatch warningsKalle Valo
Fix warnings which were recently introduced: drivers/net/wireless/ath/ath10k/ahb.c:462: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/ahb.c:470: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/sdio.c:697: space prohibited before that close parenthesis ')' Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: drop RX skb with invalid length for sdioWen Gong
When simulate random transfer fail for sdio write and read, it crash sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. it crash, the act len of ath10k_htc_hdr is higher than allocate len, it cause panic: [ 99.723482] skbuff: skb_over_panic: text:00000000caa0f780 len:57013 put:57013 head:000000004116f24a data:0000000019ecb4dc tail:0xdef5 end:0x640 dev:<NULL> [ 99.737697] ------------[ cut here ]------------ [ 99.742327] kernel BUG at /mnt/host/source/src/third_party/kernel/v4.19/net/core/skbuff.c:104! [ 99.750937] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 99.831154] Process kworker/0:2 (pid: 151, stack limit = 0x00000000728010bf) [ 99.838200] CPU: 0 PID: 151 Comm: kworker/0:2 Tainted: G W 4.19.85 #48 [ 99.846022] Hardware name: MediaTek krane sku0 board (DT) [ 99.851429] Workqueue: events sdio_irq_work [ 99.855614] pstate: 60000005 (nZCv daif -PAN -UAO) [ 99.860402] pc : skb_panic+0x64/0x68 [ 99.863974] lr : skb_panic+0x64/0x68 [ 99.867542] sp : ffffff8008833a90 [ 99.870850] x29: ffffff8008833ac0 x28: ffffffe52e337370 [ 99.876159] x27: ffffffe52e328a90 x26: 000000000000e0d0 [ 99.881469] x25: ffffffe52e336b60 x24: 000000000000deb5 [ 99.886779] x23: ffffffe52e340680 x22: ffffffe4efd47e00 [ 99.892088] x21: 000000000000deb5 x20: ffffffa516d85b4c [ 99.897397] x19: ffffffa526928037 x18: 0000000000000000 [ 99.902706] x17: 000000000000003c x16: ffffffa5265b6c80 [ 99.908015] x15: 0000000000000006 x14: 3a76656420303436 [ 99.913325] x13: 0000000000029bf0 x12: 0000000000000000 [ 99.918634] x11: 0000000000000000 x10: 0000000000000000 [ 99.923943] x9 : a3b907e4b2783000 x8 : a3b907e4b2783000 [ 99.929253] x7 : 0000000000000000 x6 : ffffffa526f66d76 [ 99.934563] x5 : 0000000000000000 x4 : 0000000000000000 [ 99.939872] x3 : 000000000002a5ab x2 : ffffffe53feed918 [ 99.945182] x1 : ffffffe53fee4a08 x0 : 000000000000008e [ 99.950491] Call trace: [ 99.952937] skb_panic+0x64/0x68 [ 99.956165] skb_put+0x7c/0x84 [ 99.959224] ath10k_sdio_irq_handler+0x740/0xbb8 [ath10k_sdio] [ 99.965055] process_sdio_pending_irqs+0x58/0x1a4 [ 99.969758] sdio_run_irqs+0x34/0x60 [ 99.973329] sdio_irq_work+0x1c/0x28 [ 99.974930] cros-ec-spi spi2.0: SPI transfer timed out [ 99.976904] process_one_work+0x210/0x410 [ 99.976911] worker_thread+0x234/0x3dc [ 99.976923] kthread+0x120/0x130 [ 99.982090] cros-ec-spi spi2.0: spi transfer failed: -110 [ 99.986054] ret_from_fork+0x10/0x18 [ 99.986063] Code: aa1403e2 2a1503e4 a90023e9 97e37d1a (d4210000) [ 99.986068] ---[ end trace cb6d948c5a0fd6c7 ]--- [ 100.017250] Kernel panic - not syncing: Fatal exception [ 100.018879] cros-ec-spi spi2.0: Command xfer error (err:-110) [ 100.023659] SMP: stopping secondary CPUs [ 100.023703] Kernel Offset: 0x251dc00000 from 0xffffff8008000000 [ 100.023707] CPU features: 0x0,2188200c [ 100.023709] Memory Limit: none The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 8 bytes will be considered as ath10k_htc_hdr, but actually the 8 bytes is not the ath10k_htc_hdr, so the act_len from this ath10k_htc_hdr is not correct, if it is a big value, such as 57013, it will trigger skb_panic. Drop the skb with invalid length will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-02ath10k: change bundle count for max rx bundle for sdioWen Gong
For max bundle size 32, the bundle mask is not same with 8/16. Change it to match the max bundle size of htc. Otherwise it will not match with firmware, for example, when bundle count is 17, then flags of ath10k_htc_hdr is 0x4, if without this patch, it will be considered as non-bundled packet because it does not have mask 0xF0, then trigger error message later: payload length 56747 exceeds max htc length: 4088. htc->max_msgs_per_htc_bundle is the min value of HTC_HOST_MAX_MSG_PER_RX_BUNDLE and msg->ready_ext.max_msgs_per_htc_bundle of ath10k_htc_wait_target, it will be sent to firmware later in ath10k_htc_start, then firmware will use it as the final max rx bundle count, in WLAN.RMH.4.4.1-00029, msg->ready_ext.max_msgs_per_htc_bundle is 32, it is same with HTC_HOST_MAX_MSG_PER_RX_BUNDLE, so the final max rx bundle count will be set to 32 in firmware. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Fixes: 224776520ead69e ("ath10k: change max RX bundle size from 8 to 32 for sdio") Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-02ath10k: enable napi on RX path for sdioWen Gong
For tcp RX, the quantity of tcp acks to remote is 1/2 of the quantity of tcp data from remote, then it will have many small length packets on TX path of sdio bus, then it reduce the RX packets's bandwidth of tcp. This patch enable napi on RX path, then the RX packet of tcp will not feed to tcp stack immeditely from mac80211 since GRO is enabled by default, it will feed to tcp stack after napi complete, if rx bundle is enabled, then it will feed to tcp stack one time for each bundle of RX. For example, RX bundle size is 32, then tcp stack will receive one large length packet, its length is neary 1500*32, then tcp stack will send a tcp ack for this large packet, this will reduce the tcp acks ratio from 1/2 to 1/32. This results in significant performance improvement for tcp RX. Tcp rx throughout is 240Mbps without this patch, and it arrive 390Mbps with this patch. The cpu usage has no obvious difference with and without NAPI. call stack for each RX packet on GRO path: (skb length is about 1500 bytes) skb_gro_receive ([kernel.kallsyms]) tcp4_gro_receive ([kernel.kallsyms]) inet_gro_receive ([kernel.kallsyms]) dev_gro_receive ([kernel.kallsyms]) napi_gro_receive ([kernel.kallsyms]) ieee80211_deliver_skb ([mac80211]) ieee80211_rx_handlers ([mac80211]) ieee80211_prepare_and_rx_handle ([mac80211]) ieee80211_rx_napi ([mac80211]) ath10k_htt_rx_proc_rx_ind_hl ([ath10k_core]) ath10k_htt_rx_pktlog_completion_handler ([ath10k_core]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms]) call stack for napi complete and send tcp ack from tcp stack: (skb length is about 1500*32 bytes) _tcp_ack_snd_check ([kernel.kallsyms]) tcp_v4_do_rcv ([kernel.kallsyms]) tcp_v4_rcv ([kernel.kallsyms]) local_deliver_finish ([kernel.kallsyms]) ip_local_deliver ([kernel.kallsyms]) ip_rcv_finish ([kernel.kallsyms]) ip_rcv ([kernel.kallsyms]) netif_receive_skb_core ([kernel.kallsyms]) netif_receive_skb_one_core([kernel.kallsyms]) netif_receive_skb ([kernel.kallsyms]) netif_receive_skb_internal ([kernel.kallsyms]) napi_gro_complete ([kernel.kallsyms]) napi_gro_flush ([kernel.kallsyms]) napi_complete_done ([kernel.kallsyms]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) __softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms]) Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: enable wow feature for sdio chipWen Gong
sdio does not support wow, this patch is to enable it. When system enter sleep state, if wowlan is enabled, then sdio chip will keep power if platform support keep power, after resume, it will not need to re-load firmware again. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath10k: set max mtu to 1500 for sdio chipWen Gong
For sdio chip, the max credit size in firmware is 1556, the 1556 include payload, ieee80211 header, htt header, htc header. So it need to set the max mtu to 1500 to forbidden TX packet which exceed 1500 form application. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: add large size for BMI download data for SDIOWen Gong
Download firmware time cost of SDIO is too long, it is about 480ms, add large size 2048 bytes for BMI download for SDIO chip, its time cost will reduced to 240ms. This will optimize the download firmware time cost. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: sdio: remove struct ath10k_sdio_rx_data::statusKalle Valo
It seems to be unused. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: sdio: cosmetic cleanupKalle Valo
Do some cosmetic cleanup while reviewing the files. No functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: add workqueue for RX path of sdioWen Gong
For RX, it has two parts, one is to read data from sdio, another is to indicate the packets to upper stack. Recently it has only one thread to do all RX things, it results that it is sequential for RX and low throughout, change RX to parallel for the two parts will increase throughout. This patch move the indication to a workqueue, it results in significant performance improvement on RX path. Udp rx throughout is 200Mbps without this patch, and it arrives 400Mbps with this patch. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: change max RX bundle size from 8 to 32 for sdioWen Gong
The max bundle size support by firmware is 32, change it from 8 to 32 will help performance. This results in significant performance improvement on RX path. The real max rx bundle is decided in ath10k_htc_wait_target(), it is the min value of HTC_HOST_MAX_MSG_PER_RX_BUNDLE and the value reported from firmware. So this change shouldn't cause any regressions with other hardware supported by ath10k. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: enable RX bundle receive for sdioAlagu Sankar
The existing implementation of initiating multiple sdio transfers for receive bundling is slowing down the receive speed. Combining the transfers using a bundle method would be ideal. The transmission utilization ratio for sdio bus for small packet is slow, because the space and time cost for sdio bus is same for large length packet and small length packet. So the speed of data for large length packet is higher than small length. Test result of different length of data: data packet(byte) cost time(us) calculated rate(Mbps) 256 28 73 512 33 124 1024 35 234 1792 45 318 14336 168 682 28672 333 688 57344 660 695 Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: remove the warning of sdio not full supportWen Gong
Recently, it has the basic feature of sdio tested success, so remove it. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12ath10k: adjust skb length in ath10k_sdio_mbox_rx_packetNicolas Boichat
When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len). Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet. The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data). Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Fixes: 8530b4e7b22bc3b ("ath10k: sdio: set skb len for all rx packets") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-28ath10k: destroy sdio workqueue while remove sdio moduleWen Gong
The workqueue need to flush and destory while remove sdio module, otherwise it will have thread which is not destory after remove sdio modules. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: add missing error handlingClaire Chang
In function ath10k_sdio_mbox_rx_alloc() [sdio.c], ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases. This will make the driver think the allocation for skb is successful and try to access the skb. If we enable failslab, system will easily crash with NULL pointer dereferencing. Call trace of CONFIG_FAILSLAB: ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio] process_sdio_pending_irqs+0x4c/0x174 sdio_run_irqs+0x3c/0x64 sdio_irq_work+0x1c/0x28 Fixes: d96db25d2025 ("ath10k: add initial SDIO support") Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: add support for firmware crash recovery on SDIO chipWen Gong
The command to simulate firmware crash: echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash It will send WMI_FORCE_FW_HANG_ASSERT to firmware, then it will trigger CPU interrupt status register for SDIO chip, ath10k driver need to configure it while enable SDIO interrupt, otherwise ath10k driver will not get the assert error info. After this change, it will success for simulate firmware crash. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-31 00:33:07 +0000