summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/mhi.c
AgeCommit message (Collapse)Author
2022-09-10wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register()Jianglei Nie
mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets some error, mhi_ctrl should be freed with mhi_free_controller(). But when ath11k_mhi_read_addr_from_dt() fails, the function returns without calling mhi_free_controller(), which will lead to a memory leak. We can fix it by calling mhi_free_controller() when ath11k_mhi_read_addr_from_dt() fails. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220907073704.58806-1-niejianglei2021@163.com
2022-04-06ath11k: mhi: remove unnecessary goto from ath11k_mhi_start()Kalle Valo
No need to have goto for a return statement, so simplify the code. While at it, print warning messages if power up calls fail. No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220401173042.17467-4-kvalo@kernel.org
2022-04-06ath11k: mhi: add error handling for suspend and resumeKalle Valo
While reviewing the mhi.c I noticed we were just ignoring the errors coming from MHI subsystem during suspend and resume. Add proper checks and warning messages. Also pass the error value to callers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220401173042.17467-3-kvalo@kernel.org
2022-04-06ath11k: mhi: remove state machineKalle Valo
State machines are difficult to understand and in this case it's just useless, which is shown by the diffstat. So remove it entirely to make the code simpler. No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220401173042.17467-2-kvalo@kernel.org
2022-04-05ath11k: Remove core PCI references from PCI common codeManikanta Pubbisetty
Remove core PCI and ath11k PCI references(struct ath11k_pci) from PCI common code. Since, PCI common code will be used by hybrid bus devices, this code should be independent from ATH11K PCI references and Linux core PCI references like struct pci_dev. Since this change introduces function callbacks for bus wakeup and bus release operations, wakeup_mhi HW param is no longer needed and hence it is removed completely. Alternatively, bus wakeup/release ops for QCA9074 are initialized to NULL as QCA9704 does not need bus wakeup/release for register accesses. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328055714.6449-6-quic_mpubbise@quicinc.com
2022-04-05ath11k: Refactor MSI logic to support WCN6750Manikanta Pubbisetty
Refactor MSI logic in order to support hybrid bus devices like WCN6750. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328055714.6449-5-quic_mpubbise@quicinc.com
2022-04-05ath11k: Refactor PCI code to support WCN6750Manikanta Pubbisetty
Unlike other ATH11K PCIe devices which are enumerated by APSS processor (Application Processor SubSystem), WCN6750 gets enumerated by the WPSS Q6 processor (Wireless Processor SubSystem); In simple terms, though WCN6750 is PCIe device, it is not attached to the APSS processor, APSS will not know of such a device being present in the system and therefore WCN6750 will be registered as a platform device to the kernel core like other supported AHB devices. WCN6750 needs both AHB and PCI APIs for it's operation, it uses AHB APIs for device probe/boot and PCI APIs for device setup and register accesses. Because of this nature, it is referred as a hybrid bus device. Refactor PCI code to support hybrid bus devices like WCN6750. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328055714.6449-3-quic_mpubbise@quicinc.com
2022-03-23ath11k: add support for device recovery for QCA6390/WCN6855Wen Gong
Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-21ath11k: configure RDDM size to mhi for recovery by firmwareWen Gong
The rddm_size is needed by firmware while mhi enter RDDM state, add it to support recovery when ath11k receive MHI_CB_EE_RDDM message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220209060012.32478-4-quic_wgong@quicinc.com
2022-01-31ath11k: mhi: use mhi_sync_power_up()Kalle Valo
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The reason for that was that we were using mhi_async_power_up() which does not check any errors. But mhi_sync_power_up() on the other hand does check for errors so let's use that to fix the crash. I was not able to find a reason why an async version was used. ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from ath11k_hif_power_up(), which can sleep. So sync version should be safe to use here. [ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567 [ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k] [ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08 [ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246 [ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455 [ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80 [ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497 [ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000 [ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8 [ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000 [ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0 [ 145.570623] Call Trace: [ 145.570675] <TASK> [ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k] [ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k] [ 145.570864] ? tasklet_init+0x150/0x150 [ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k] [ 145.570986] ? tasklet_clear_sched+0x42/0xe0 [ 145.571042] ? tasklet_kill+0xe9/0x1b0 [ 145.571095] ? tasklet_clear_sched+0xe0/0xe0 [ 145.571148] ? irq_has_action+0x120/0x120 [ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k] [ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci] [ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k] [ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k] [ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci] [ 145.571553] pci_device_remove+0x9a/0x1c0 [ 145.571605] __device_release_driver+0x332/0x660 [ 145.571659] driver_detach+0x1e7/0x2c0 [ 145.571712] bus_remove_driver+0xe2/0x2d0 [ 145.571772] pci_unregister_driver+0x21/0x250 [ 145.571826] __do_sys_delete_module+0x30a/0x4b0 [ 145.571879] ? free_module+0xac0/0xac0 [ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50 [ 145.572039] ? lockdep_hardirqs_on+0x79/0x100 [ 145.572097] do_syscall_64+0x3b/0x90 [ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
2022-01-11ath11k: add missing of_node_put() to avoid leakYang Yingliang
The node pointer is returned by of_find_node_by_type() or of_parse_phandle() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211221114003.335557-1-yangyingliang@huawei.com
2021-12-17Merge tag 'wireless-drivers-next-2021-12-17' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 Second set of patches for v5.17, planning to do at least one more. Smaller new features, nothing special this time. Major changes: rtw88 * debugfs file to fix tx rate iwlwifi * support SAR GEO Offset Mapping (SGOM) via BIOS * support firmware API version 68 * add some new device IDs ath11k * support PCI devices with 1 MSI vector * WCN6855 hw2.1 support * 11d scan offload support * full monitor mode, only supported on QCN9074 * scan MAC address randomization support * reserved host DDR addresses from DT for PCI devices support ath9k * switch to rate table based lookup ath * extend South Korea regulatory domain support wcn36xx * beacon filter support * tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits) wcn36xx: Implement beacon filtering wcn36xx: Fix physical location of beacon filter comment wcn36xx: Fix beacon filter structure definitions ath11k: Use reserved host DDR addresses from DT for PCI devices dt: bindings: add new DT entry for ath11k PCI device support wilc1000: Improve WILC TX performance when power_save is off wl1251: specify max. IE length rsi: fix array out of bound wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq" wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx wilc1000: Rename irq handler from "WILC_IRQ" to netdev name wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi" wilc1000: Fix spurious "FW not responding" error wilc1000: Remove misleading USE_SPI_DMA macro wilc1000: Fix missing newline in error message wilc1000: Fix copy-and-paste typo in wilc_set_mac_address rtw89: coex: Update COEX to 5.5.8 rtw89: coex: Cancel PS leaving while C2H comes rtw89: coex: Update BT counters while receiving report rtw89: coex: Define LPS state for BTC using ... ==================== Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16ath11k: Use reserved host DDR addresses from DT for PCI devicesAnilkumar Kolli
Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2) is reserved through DT entries for firmware usage. Send the base address from DT entries. If DT entry is available, PCI device will work with fixed_mem_region else host allocates multiple segments. IPQ8074 on HK10 board supports multiple PCI devices. IPQ8074 + QCN9074 is tested with this patch. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638789319-2950-2-git-send-email-akolli@codeaurora.org
2021-12-09bus: mhi: core: Add support for forced PM resumeLoic Poulain
For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process. Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179 Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pengyu Ma <mapengyu@gmail.com> Tested-by: Kalle Valo <kvalo@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-07ath11k: add support for WCN6855 hw2.1Baochen Qiang
Ath11k fails to probe WCN6855 hw2.1 chip: [ 6.983821] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 6.983841] ath11k_pci 0000:06:00.0: Unsupported WCN6855 SOC hardware version: 18 17 This is caused by the wrong bit mask setting of hardware major version: for QCA6390/QCN6855, it should be BIT8-11, not BIT8-16, so change the definition to GENMASK(11, 8). Also, add a separate entry for WCN6855 hw2.1 in ath11k_hw_params. Please note that currently WCN6855 hw2.1 shares the same firmwares as hw2.0, so users of this chip need to create a symlink as below: ln -s hw2.0 hw2.1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Fixes: 18ac1665e785 ("ath11k: pci: check TCSR_SOC_HW_VERSION") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211129025613.21594-1-quic_bqiang@quicinc.com
2021-11-22ath11k: add support one MSI vectorCarl Huang
On some platforms it's not possible to allocate 32 MSI vectors for various reasons, be it kernel configuration, VT-d disabled, buggy BIOS etc. So ath11k was not able to use QCA6390 PCI devices on those platforms. Add support for one MSI vector to solve that. In case of one MSI vector, interrupt migration needs to be disabled. This is because when interrupt migration happens, the msi_data may change. However, msi_data is already programmed to rings during initial phase and ath11k has no way to know that msi_data is changed during run time and reprogram again. In case of one MSI vector, MHI subsystem should not use IRQF_NO_SUSPEND as QCA6390 doesn't set this flag too. Ath11k doesn't need to leave IRQ enabled in suspend state. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Link: https://lore.kernel.org/r/20211026041714.5219-1-bqiang@codeaurora.org
2021-08-05ath11k: set register access length for MHI driverBhaumik Bhatt
MHI driver requires register space length to add range checks and prevent memory region accesses outside of that for MMIO space. Set it before registering the MHI controller. Link: https://lore.kernel.org/r/1620330705-40192-5-git-send-email-bbhatt@codeaurora.org Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12ath11k: add support for WCN6855Baochen Qiang
This patch is to add support for WCN6855. For station mode, WCN6855 is able to connect to an AP, and ping works well. For AP mode, hostapd is able to bringup an SAP interface with WCN6855, a normal station can connect to this AP and ping works well. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-7-jouni@codeaurora.org
2021-04-22ath11k: fix warning in ath11k_mhi_configAnilkumar Kolli
Initialize static variable ath11k_mhi_config for all hw_rev, return error for unknown hw_rev. This patch fixes below Smatch warning: drivers/net/wireless/ath/ath11k/mhi.c:357 ath11k_mhi_register() error: uninitialized symbol 'ath11k_mhi_config'. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 Fixes: a233811ef600 ("ath11k: Add qcn9074 mhi controller config") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1617857830-19315-1-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Add qcn9074 mhi controller configAnilkumar Kolli
Add MHI config for QCN9074 also populate ath11k_hw_params for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-6-git-send-email-akolli@codeaurora.org
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605634436-36506-1-git-send-email-bbhatt@codeaurora.org
2020-11-18bus: mhi: Remove auto-start optionLoic Poulain
There is really no point having an auto-start for channels. This is confusing for the device drivers, some have to enable the channels, others don't have... and waste resources (e.g. pre allocated buffers) that may never be used. This is really up to the MHI device(channel) driver to manage the state of its channels. While at it, let's also remove the auto-start option from ath11k mhi controller. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: clubbed ath11k change] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-08-27ath11k: return -ENOMEM on allocation failureDan Carpenter
Returning PTR_ERR(NULL) means success, but we should return -ENOMEM. Fixes: 1399fb87ea3e ("ath11k: register MHI controller device for QCA6390") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826113417.GE393664@mwanda
2020-08-18ath11k: reset MHI during power down and power upCarl Huang
For QCA6390, normal power up and power down can't bring MHI to a workable state. This happens especially in warm reboot and rmmod and insmod. Host needs to write a few registers to bring MHI to normal state. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeauroro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-10-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: register MHI controller device for QCA6390Govind Singh
Modem Host Interface (MHI) is a communication protocol to communicate with external Qualcomm modems and Wi-Fi chipsets over high speed peripheral buses. Even though MHI doesn’t dictate underlying physical layer, protocol and MHI stack is structured for PCI based devices. Register directly with MHI subsystem as a MHI device driver for firmware download to QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-9-git-send-email-kvalo@codeaurora.org
generated by cgit (git 2.34.1) at 2025-04-28 23:50:11 +0000