| Age | Commit message (Collapse) | Author |
|---|
|
In 'ath9k_hw_get_nf_hist_mid()', prefer 'memcpy()' and 'sort()'
over an ad-hoc things. Briefly tested as a separate module.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250109080703.106692-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Prefer 'ktime_t' over 'struct timespec64' for 'struct ath_chanctx' and
'struct ath_softc' timestamps, choose standard kernel time API over an
ad-hoc math in 'chanctx_event_delta()' and 'ath9k_hw_get_tsf_offset()',
adjust related users. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241209155027.636400-3-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Remove unused 'struct ath_softc *' argument of 'ath_pkt_duration()',
'ath_tx_update_baw()', 'ath_get_skb_tid()', 'ath_tx_addto_baw()' and
'ath_tx_count_frames()', adjust related users. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241209155027.636400-2-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Since 'txq' argument of 'ath_txq_skb_done()' is actually
(mis|un)used, convert the former to local variable and
adjust all related users. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241209155027.636400-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
|
|
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some ath9k chips can, seemingly at random, end up in a state which can
be described as "deaf". No or nearly no interrupts are generated anymore
for incoming packets. Existing links either break down after a while and
new links will not be established.
The circumstances leading to this "deafness" is still unclear, but some
particular chips (especially 2-stream 11n SoCs, but also others) can go
'deaf' when running AP or mesh (or both) after some time. It's probably
a hardware issue, and doing a channel scan to trigger a chip
reset (which one normally can't do on an AP interface) recovers the
hardware.
The only way the driver can detect this state, is by detecting if there
has been no RX activity for a while. In this case we can proactively
reset the chip (which only takes a small number of milliseconds, so
shouldn't interrupt things too much if it has been idle for several
seconds), which functions as a workaround.
OpenWrt, and various derivatives, have been carrying versions of this
workaround for years, that were never upstreamed. One version[0],
written by Felix Fietkau, used a simple counter and only reset if there
was precisely zero RX activity for a long period of time. This had the
problem that in some cases a small number of interrupts would appear
even if the device was otherwise not responsive. For this reason,
another version[1], written by Simon Wunderlich and Sven Eckelmann, used
a time-based approach to calculate the average number of RX interrupts
over a longer (four-second) interval, and reset the chip when seeing
less than one interrupt per second over this period. However, that
version relied on debugfs counters to keep track of the number of
interrupts, which means it didn't work at all if debugfs was not
enabled.
This patch unifies the two versions: it uses the same approach as Felix'
patch to count the number of RX handler invocations, but uses the same
time-based windowing approach as Simon and Sven's patch to still handle
the case where occasional interrupts appear but the device is otherwise
deaf.
Since this is based on ideas by all three people, but not actually
directly derived from any of the patches, I'm including Suggested-by
tags from Simon, Sven and Felix below, which should hopefully serve as
proper credit.
[0] https://patchwork.kernel.org/project/linux-wireless/patch/20170125163654.66431-3-nbd@nbd.name/
[1] https://patchwork.kernel.org/project/linux-wireless/patch/20161117083614.19188-2-sven.eckelmann@open-mesh.com/
Suggested-by: Simon Wunderlich <sw@simonwunderlich.de>
Suggested-by: Sven Eckelmann <se@simonwunderlich.de>
Suggested-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Sven Eckelmann <se@simonwunderlich.de>
Reviewed-by: Sven Eckelmann <se@simonwunderlich.de>
Tested-by: Issam Hamdi <ih@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Link: https://patch.msgid.link/20241106-ath9k-deaf-detection-v1-1-736a150d2425@redhat.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
|
|
Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241111104724.484586-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/wireless to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
En passant several whitespace changes are done to make indentation
consistent in the struct initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.13
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove
ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
|
|
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Completely unused here in favor of Device Tree based setup. The DT code
in here should currently match what is available with platform files.
Any such lapse can always be added.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240906195359.6982-4-rosenp@gmail.com
|
|
This is completely unused as platform files are no longer used anywhere.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240906195359.6982-3-rosenp@gmail.com
|
|
There are no more board files defining platform data for this driver and
eeprom support through NVMEM has already been implemented. No need to
keep this old functionality around.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240906195359.6982-2-rosenp@gmail.com
|
|
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240909103855.68006-1-aha310510@gmail.com
|
|
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240830011858.603514-1-lizetao1@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12
This is once again a fairly light pull request since ath12k is still
working on MLO-related changes, and the other drivers are mostly in
maintenance mode.
ath12k
* Fix a frame-larger-than warning seen with debug builds
* Fix flex-array-member-not-at-end warnings
ath11k
* Fix flex-array-member-not-at-end warnings
ath9k
* Fix a syzbot-reported issue on USB-based devices
|
|
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.
Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk
|
|
This reverts commit 92da4ce847bc5d942ddfdb102dba92f4e2797a59.
Felix pointed out that moving to devm for request_irq() can lead to a use after
free, and that avoiding that means having explicit frees that makes the devm
thing pretty pointless. So let's just revert the patch.
Link: https://lore.kernel.org/r/201f06b6-14f5-41bb-8897-49665cf14b66@nbd.name
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240808103758.11696-1-toke@toke.dk
|
|
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d93 ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb5b ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
|
|
Using devm_gpio_request_one() is simpler as then we don't need to call
gpio_free().
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240731210312.7622-1-rosenp@gmail.com
|
|
Avoids having to manually call free_irq(). Simplifies code slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240731210243.7467-1-rosenp@gmail.com
|
|
In 'ath9k_get_et_stats()', promote TX stats counters to 'u64'
to avoid possible integer overflow. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240725111743.14422-1-d.kandybka@gmail.com
|
|
Use the swap() macro to simplify the ath9k_hw_get_nf_hist_mid() function
and improve its readability.
Fixes the following Coccinelle/coccicheck warning reported by
swap.cocci:
WARNING opportunity for swap()
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240710185743.709742-2-thorsten.blum@toblux.com
|
|
Only managed PCI resource in the driver is the iomapped bar. However the bar
is unmapped in the same function. Therefore using the device-managed
versions just causes overhead, w/o any benefit. Once this is switched to the
non-managed versions, there's nothing left to be managed for
pcim_enable_device(). Therefore we can reduce overhead here too and switch to
the non-managed version as well. This includes removing the no longer needed
call to pcim_pin_device().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/3b46f6c7-4372-4cc9-9a7c-2c1c06d29324@gmail.com
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields
In file included from include/linux/string.h:369,
from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
462 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
|
|
Sparse warns:
drivers/net/wireless/ath/ath9k/eeprom_9287.c:82:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_9287.c:82:9: warning: cast from restricted __le32
drivers/net/wireless/ath/ath9k/eeprom_9287.c:83:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_9287.c:83:9: warning: cast from restricted __le32
drivers/net/wireless/ath/ath9k/eeprom_def.c:138:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_def.c:138:9: warning: cast from restricted __le32
drivers/net/wireless/ath/ath9k/eeprom_def.c:139:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_def.c:139:9: warning: cast from restricted __le32
drivers/net/wireless/ath/ath9k/eeprom_def.c:140:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_def.c:140:9: warning: cast from restricted __le32
drivers/net/wireless/ath/ath9k/eeprom_4k.c:79:9: warning: cast to restricted __le16
drivers/net/wireless/ath/ath9k/eeprom_4k.c:79:9: warning: cast from restricted __le32
antCtrlChain is an array of __le32 so le32_to_cpu() needs to be used.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://msgid.link/20240320170656.3534265-4-kvalo@kernel.org
|
|
Sparse warns:
drivers/net/wireless/ath/ath9k/init.c:79:5: warning: symbol 'ath9k_use_msi' was not declared. Should it be static?
Move the extern to ath9k.h so that it's visible in init.c.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://msgid.link/20240320170656.3534265-3-kvalo@kernel.org
|
|
Sparse warns:
drivers/net/wireless/ath/ath9k/xmit.c:1677:20: warning: incorrect type in initializer (different base types)
drivers/net/wireless/ath/ath9k/xmit.c:1677:20: expected unsigned short [usertype] mask
drivers/net/wireless/ath/ath9k/xmit.c:1677:20: got restricted __le16 [usertype]
drivers/net/wireless/ath/ath9k/xmit.c:1681:17: warning: restricted __le16 degrades to integer
drivers/net/wireless/ath/ath9k/xmit.c:1682:42: warning: restricted __le16 degrades to integer
drivers/net/wireless/ath/ath9k/xmit.c:1682:36: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/xmit.c:1682:36: expected restricted __le16 [usertype] frame_control
drivers/net/wireless/ath/ath9k/xmit.c:1682:36: got int
Fix ath9k_set_moredata() to use __le16 with masks and use if statement instead
of multiply operator.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://msgid.link/20240320170656.3534265-2-kvalo@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.9
We have support for QCA2066 now and also several new features in ath12k.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
|
|
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a
finalizing worker using the deflink. With MLO, there is a need to do it
on a given link basis.
Pass link ID of the link on which CSA needs to be finalized.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ath9k_wmi_event_tasklet() used in ath9k_htc assumes that all the data
structures have been fully initialised by the time it runs. However, because of
the order in which things are initialised, this is not guaranteed to be the
case, because the device is exposed to the USB subsystem before the ath9k driver
initialisation is completed.
We already committed a partial fix for this in commit:
8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")
However, that commit only aborted the WMI_TXSTATUS_EVENTID command in the event
tasklet, pairing it with an "initialisation complete" bit in the TX struct. It
seems syzbot managed to trigger the race for one of the other commands as well,
so let's just move the existing synchronisation bit to cover the whole
tasklet (setting it at the end of ath9k_htc_probe_device() instead of inside
ath9k_tx_init()).
Link: https://lore.kernel.org/r/ed1d2c66-1193-4c81-9542-d514c29ba8b8.bugreport@ubisectech.com
Fixes: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240126140218.1033443-1-toke@toke.dk
|
|
The variable ret is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so ret can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the
enclosing expression, the value is never actually read from
'ret' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240116155452.2315351-1-colin.i.king@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.9
We have new features for both ath11k and ath12k. ath12k is now under
heavy refactoring in preparation for MLO support.
Major changes:
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
wifi: ath11k: workaround too long expansion sparse warnings
Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
wifi: rtw89: add DBCC H2C to notify firmware the status
wifi: rtw89: mac: add suffix _ax to MAC functions
wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
wifi: rtw89: 8922a: add power on/off functions
wifi: rtw89: add XTAL SI for WiFi 7 chips
wifi: rtw89: phy: print out RFK log with formatted string
wifi: rtw89: parse and print out RFK log from C2H events
wifi: rtw89: add C2H event handlers of RFK log and report
wifi: rtw89: load RFK log format string from firmware file
wifi: rtw89: fw: add version field to BB MCU firmware element
wifi: rtw89: fw: load TX power track tables from fw_element
wifi: mwifiex: configure BSSID consistently when starting AP
wifi: mwifiex: add extra delay for firmware ready
wifi: mac80211: sta_info.c: fix sentence grammar
wifi: mac80211: rx.c: fix sentence grammar
...
====================
Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 'ath_ant_try_scan()', (most likely) the 2nd LNA's signal
strength should be used in comparison against RSSI when
selecting first LNA as the main one. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231211172502.25202-1-dmantipov@yandex.ru
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231117093056.873834-11-u.kleine-koenig@pengutronix.de
|
|
The rate macros are for AR9002 and not correct for AR9003.
The AGC 3 macros are unused and have incorrect values, at least for
QCN5502, where AR_AGC3_BASE should be 0x2de00.
This change does not appear to affect the final binary.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230629231625.951744-3-wlooi@ucalgary.ca
|
|
In the `ath_set_channel()` function, we only reset surveys that are not
from the current channel. This leads to the accumulation of survey data for
the current channel indefinitely. This may not be the most optimal
approach, as we want the ACS to rely on the most recent survey.
So reset the survey data for the current channel at the start of each scan.
Signed-off-by: Hancheng Yang <hyang@freebox.fr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231205170623.3029689-1-hyang@freebox.fr
|
|
ath9k_htc_txstatus()
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr
|
|
No need cast (void *) to (struct owl_ctx *), (struct ath_hw *),
(struct cmd_buf *) or other types.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045226.524544-1-yunchuan@nfschina.com
|
|
The read is currently with RCU and the write can deadlock,
convert both for the sake of illustration.
Make mac80211 depend on cfg80211 debugfs to get the helpers,
but mac80211 debugfs without it does nothing anyway. This
also required some adjustments in ath9k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On v6.6-rc4 with GCC 13.2 I see:
drivers/net/wireless/ath/ath9k/hif_usb.c:1223:42: warning: '.0.fw' directive output may be truncated writing 5 bytes into a region of size between 4 and 11 [-Wformat-truncation=]
drivers/net/wireless/ath/ath9k/hif_usb.c:1222:17: note: 'snprintf' output between 27 and 34 bytes into a destination of size 32
Fix it by increasing the size of the fw_name field to 64 bytes.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012135854.3473332-3-kvalo@kernel.org
|
|
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In ath9k_hif_usb_resume, the error handling code calls
ath9k_hif_usb_dealloc_urbs twice in different paths.
To unify the error handling code, we move the else branch before
the if branch and drop one level of indentation of the if branch.
In addition, move the ret variable at the end of variable declarations
to be reverse x-mas tree order.
Note that this patch does not incur any functionability change.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905013556.2595854-1-dzm91@hust.edu.cn
|
