summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)Author
2017-06-28ath9k: remove useless variable assignment in ath_mci_intr()Gustavo A. R. Silva
Value assigned to variable offset at line 551 is overwritten at line 562, before it can be used. This makes such variable assignment useless. Addresses-Coverity-ID: 1226941 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-28ath9k: Use mutex_lock to avoid potential race in start/stop rngMiaoqing Pan
Move ath9k_rng_stop/ath9k_rng_start pair into critical section, use mutex_lock to void potential race accessing. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-28ath9k: avoid potential freezing during random generator readMiaoqing Pan
In the worst case, ath9k_rng_stop() may take 10s to stop rng kthread. The time is too long for users, use wait_event_interruptible_timeout() instead of msleep_interruptible(), wakup immediately once kthread_should_stop() is true. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-28ath9k: fix an invalid pointer dereference in ath9k_rng_stop()Miaoqing Pan
The bug was triggered when do suspend/resuming continuously on Dell XPS L322X/0PJHXN version 9333 (2013) with kernel 4.12.0-041200rc4-generic. But can't reproduce on DELL E5440 + AR9300 PCIE chips. The warning is caused by accessing invalid pointer sc->rng_task. sc->rng_task is not be cleared after kthread_stop(sc->rng_task) be called in ath9k_rng_stop(). Because the kthread is stopped before ath9k_rng_kthread() be scheduled. So set sc->rng_task to null after kthread_stop(sc->rng_task) to resolve this issue. WARNING: CPU: 0 PID: 984 at linux/kernel/kthread.c:71 kthread_stop+0xf1/0x100 CPU: 0 PID: 984 Comm: NetworkManager Not tainted 4.12.0-041200rc4-generic #201706042031 Hardware name: Dell Inc. Dell System XPS L322X/0PJHXN, BIOS A09 05/15/2013 task: ffff950170fdda00 task.stack: ffffa22c01538000 RIP: 0010:kthread_stop+0xf1/0x100 RSP: 0018:ffffa22c0153b5b0 EFLAGS: 00010246 RAX: ffffffffa6257800 RBX: ffff950171b79560 RCX: 0000000000000000 RDX: 0000000080000000 RSI: 000000007fffffff RDI: ffff9500ac9a9680 RBP: ffffa22c0153b5c8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa22c0153b648 R11: ffff9501768004b8 R12: ffff9500ac9a9680 R13: ffff950171b79f70 R14: ffff950171b78780 R15: ffff9501749dc018 FS: 00007f0d6bfd5540(0000) GS:ffff95017f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc190161a08 CR3: 0000000232906000 CR4: 00000000001406f0 Call Trace: ath9k_rng_stop+0x1a/0x20 [ath9k] ath9k_stop+0x3b/0x1d0 [ath9k] drv_stop+0x33/0xf0 [mac80211] ieee80211_stop_device+0x43/0x50 [mac80211] ieee80211_do_stop+0x4f2/0x810 [mac80211] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196043 Reported-by: Giulio Genovese <giulio.genovese@gmail.com> Tested-by: Giulio Genovese <giulio.genovese@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-28ath9k: fix tx99 bus errorMiaoqing Pan
The hard coded register 0x9864 and 0x9924 are invalid for ar9300 chips. Cc: <stable@vger.kernel.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-28ath9k: fix tx99 use after freeMiaoqing Pan
One scenario that could lead to UAF is two threads writing simultaneously to the "tx99" debug file. One of them would set the "start" value to true and follow to ath9k_tx99_init(). Inside the function it would set the sc->tx99_state to true after allocating sc->tx99skb. Then, the other thread would execute write_file_tx99() and call ath9k_tx99_deinit(). sc->tx99_state would be freed. After that, the first thread would continue inside ath9k_tx99_init() and call r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl); that would make use of the freed sc->tx99_skb memory. Cc: <stable@vger.kernel.org> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.13. Major changes: ath10k * add initial SDIO support (still work in progress)
2017-05-19ath9k: check ah->curchan when updating tx powerStanislaw Gruszka
When driver fail to reset card ah->curchan value stay NULL. When later driver try to update tx power it oops by using ah->curchan (calltrace is shown below). This problem were reported at various places and for some it was fixed by making ath9k_hw_chip_reset() do not fail. I have this bug report on some oldish RHEL kernel with AR9285, however it's hard to debug where reset fail when kernel OOPS, so I think this patch should be applied. Hopefully ah->curchan is not used unconditionally on other places until is initialized on ath9k_config(). ath: phy0: Chip reset failed ath: phy0: Unable to reset hardware; reset status -22 (freq 2412 MHz) BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f8a35585>] ath9k_hw_set_txpowerlimit+0x25/0x80 [ath9k_hw] Oops: 0000 [#1] SMP <snip> Call Trace: [<f8aac1aa>] ? ath9k_cmn_update_txpow+0x1a/0x30 [ath9k_common] [<f8cf4f4e>] ? ath_complete_reset+0x4e/0x130 [ath9k] [<f8cf54d7>] ? ath9k_start+0x127/0x1e0 [ath9k] [<f8c2e52f>] ? ieee80211_do_open+0x30f/0x910 [mac80211] [<c07bd96d>] ? dev_open+0x8d/0xf0 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath9k: remove unnecessary codeGustavo A. R. Silva
The array field eeprom_data in struct th9k_platform_data is a fixed size array so it can never be NULL. Addresses-Coverity-ID: 1364903 Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19ath9k: fix spelling in ath9k_tx99_init()Ammly Fredrick
It's spelled hardware, not harware. Signed-off-by: Ammly Fredrick <ammlyf@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-08mac80211: properly remove RX_ENC_FLAG_40MHZJohannes Berg
Somehow I missed this in my RX rate cleanup series, causing some drivers to not report correct bandwidth since this flag isn't used by mac80211 anymore. Fix this, and make hwsim also report higher bandwidths appropriately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-24Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Quite a lot of patches for rtlwifi and iwlwifi this time, but changes also for other active wireless drivers. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers iwlwifi * work to support A000 devices continues * add support for FW API 30 * add Geographical and Dynamic Specific Absorption Rate (SAR) support * support a few new PCI device IDs rtlwifi * work on adding Bluetooth coexistance support, not finished yet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-next-for-davem-2017-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-19ath9k: add noise floor override optionSimon Wunderlich
Introduce a debugfs option to manually override the noise floor, ignoring the automatically tuned noise floor of the driver/hw. In my tests with a AR9580 based module and a tx99 5 MHz interferer, I could tune the noisefloor to -95 dBm or above to allow communication again. The automatic noise floor calibration sometimes could adapt to the situation as well, but not reliably and permanently. I would consider this "feature" experimental and interesting for people debugging the noise floor calibration or other effects of the hardware. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: Add cast to u8 to FREQ2FBIN macroMatthias Kaehlcke
The macro results are assigned to u8 variables/fields. Adding the cast fixes plenty of clang warnings about "implicit conversion from 'int' to 'u8'". Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: Add Dell Wireless 1601 with wowlan capabilityDamien Thébault
Add the Dell Wireless 1601 card as an AR9462 in the ath9k pci list. Note that the wowlan feature is supported and has been tested successfully. Signed-off-by: Damien Thébault <damien@dtbo.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-19ath9k: off by one in ath9k_hw_nvram_read_array()Dan Carpenter
The > should be >= or we read one space beyond the end of the array. Fixes: ab5c4f71d8c7 ("ath9k: allow to load EEPROM content via firmware API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05ath9k_htc: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39+ Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-16ath9k: don't trigger spectral scan when not enabledZefir Kurtisi
Doing so enables the FFT generation without prior configuration, leading to an IRQ storm caused by invalid (or at least unwanted) PHY errors. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09ath9k_htc: Add support of AirTies 1eda:2315 AR9271 deviceDmitry Tunin
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=1eda ProdID=2315 Rev=01.08 S: Manufacturer=ATHEROS S: Product=USB2.0 WLAN S: SerialNumber=12345 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-06wireless: Set NL80211_EXT_FEATURE_CQM_RSSI_LIST in multiple driversAndrew Zaborowski
Set the NL80211_EXT_FEATURE_CQM_RSSI_LIST wiphy extended feature wholesale in all mac80211-based drivers that do not set the IEEE80211_VIF_BEACON_FILTER flags on their interfaces. mac80211 will be processing supplied RSSI values in ieee80211_rx_mgmt_beacon and will detect when the thresholds set by ieee80211_set_cqm_rssi_range_config are crossed. Remaining (few) drivers need code to enable the firmware to monitor the thresholds. This is mostly only compile-tested. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27scripts/spelling.txt: add "aligment" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: aligment||alignment I did not touch the "N_BYTE_ALIGMENT" macro in drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable impact. I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because it is surrounded by #if 0 ... #endif. It is surely safe and I confirmed "_alignment_handler" is correct. I also fixed the "controler" I found in the same hunk in arch/openrisc/kernel/head.S. Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-15ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter
This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath9k: Access rchan::buf only with per_cpu helperSven Eckelmann
The relayfs was changed to use per CPU constructs to handle the rchan buffers. But the users of the rchan buffers in other parts of the kernel were not modified. This caused crashes like BUG: unable to handle kernel paging request at 00003a5198a0b910 IP: [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 PGD 0 [ 179.522449] Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5 #1 [...] Call Trace: <IRQ> [ 179.656426] [<ffffffffa9704373>] ? ath_rx_tasklet+0x2f3/0xd10 [<ffffffffa9702106>] ? ath9k_tasklet+0x1b6/0x230 [<ffffffffa90dcbd1>] ? tasklet_action+0xf1/0x100 [<ffffffffa9a3cb3f>] ? __do_softirq+0xef/0x284 [<ffffffffa90dd22e>] ? irq_exit+0xae/0xb0 [<ffffffffa9a3c89f>] ? do_IRQ+0x4f/0xd0 [<ffffffffa9a3aa42>] ? common_interrupt+0x82/0x82 <EOI> [ 179.703152] [<ffffffffa9a39c1d>] ? poll_idle+0x2d/0x57 [<ffffffffa908c845>] ? sched_clock+0x5/0x10 [<ffffffffa97bc8d6>] ? cpuidle_enter_state+0xf6/0x2d0 [<ffffffffa911988e>] ? cpu_startup_entry+0x14e/0x230 [<ffffffffaa3cdf70>] ? start_kernel+0x461/0x481 [<ffffffffaa3cd120>] ? early_idt_handler_array+0x120/0x120 [<ffffffffaa3cd413>] ? x86_64_start_kernel+0x14c/0x170 Code: 31 db 41 be ff ff ff ff 4c 8b 26 48 8b 6e 08 49 8b 84 24 60 05 00 00 48 8b 00 0f b7 40 04 66 89 44 24 48 eb 11 48 8b 55 40 48 98 <48> 8b 3c c2 e8 ad a0 a4 ff 01 c3 41 8d 56 01 be 00 02 00 00 48 RIP [<ffffffffa973cb3a>] ath_cmn_process_fft+0xea/0x610 RSP <ffff9b43e7003d20> CR2: 00003a5198a0b910 Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Cc: Akash Goel <akash.goel@intel.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Reported-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath9k: clean up and fix ath_tx_count_airtimeFelix Fietkau
ath_tx_count_airtime is doing a lot of unnecessary work: - Redundant station lookup - Redundant rcu_read_lock/unlock - Useless memcpy of bf->rates - Useless NULL check of bf->bf_mpdu - Redundant lookup of the skb tid Additionally, it tries to look up the mac80211 queue index from the txq, which fails if the frame was delivered via the power save queue. This patch fixes all of these issues by passing down the right set of pointers instead of doing extra work Cc: stable@vger.kernel.org Fixes: 63fefa050477 ("ath9k: Introduce airtime fairness scheduling between stations") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath9k: fix race condition in enabling/disabling IRQsFelix Fietkau
The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath9k_hw: check if the chip failed to wake upFelix Fietkau
In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: "QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a state in which a read of AR_CFG always returns 0xdeadbeef. This should not happen when when the power_mode of the device is ATH9K_PM_AWAKE." Include the check for the default register state in the existing MAC hang check. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath9k: rename tx_complete_work to hw_check_workFelix Fietkau
Also include common MAC alive check. This should make the hang checks more reliable for modes where beacons are not sent and is used as a starting point for further hang check improvements Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath9k: move RELAY and DEBUG_FS to ATH9K[_HTC]_DEBUGFSChristian Lamparter
Currently, the common ath9k_common module needs to have a dependency on RELAY and DEBUG_FS in order to built. This is usually not a problem. But for RAM and FLASH starved AR71XX devices, every little bit counts. This patch adds a new symbol CONFIG_ATH9K_COMMON_DEBUG which makes it possible to drop the RELAY and DEBUG_FS dependency there and move it to ATH_(HTC)_DEBUGFS. Note: The shared FFT/spectral code (which is the only user of the relayfs in ath9k*) needs DEBUG_FS to export the relayfs interface to dump the data to userspace. So it makes no sense to have the functions compiled in, if DEBUG_FS is not there. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath9k: fix spelling mistake: "meaurement" -> "measurement"Colin Ian King
Trivial fix to spelling mistake in ath_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath9k: ar9003_mac: kill off ACCESS_ONCE()Mark Rutland
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some new features (e.g. KTSAN / Kernel Thread Sanitizer), it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, for some files (including the ath9k ar9003 mac driver), this mangles the formatting. As a preparatory step, this patch converts the driver to use {READ,WRITE}_ONCE() without said mangling. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: ath9k-devel@qca.qualcomm.com Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: ath9k-devel@lists.ath9k.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath9k: ar9002_mac: kill off ACCESS_ONCE()Mark Rutland
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some new features (e.g. KTSAN / Kernel Thread Sanitizer), it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, for some files (including the ath9k ar9002 mac driver), this mangles the formatting. As a preparatory step, this patch converts the driver to use {READ,WRITE}_ONCE() without said mangling. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: ath9k-devel@qca.qualcomm.com Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: ath9k-devel@lists.ath9k.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-02Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 The most notable change here is the inclusion of airtime fairness scheduling to ath9k. It prevents slow clients from hogging all the airtime and unfairly slowing down faster clients. Otherwise smaller changes and cleanup. Major changes: ath9k * cleanup eeprom endian handling * add airtime fairness scheduling ath10k * fix issues for new QCA9377 firmware version * support dev_coredump() for firmware crash dump * enable channel 169 on 5 GHz band ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-21ath9k: do not return early to fix rcu unlockingTobias Klausmann
Starting with commit d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls and suspicious RCU usage: =============================== [ INFO: suspicious RCU usage. ] 4.9.0-rc8 #11 Not tainted ------------------------------- kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/7/0: #0: ( rcu_read_lock ){......} , at: [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k] stack backtrace: CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013 ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001 ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8 ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4 Call Trace: <IRQ> [<ffffffff8132b1e5>] dump_stack+0x68/0x93 [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110 [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200 [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0 [<ffffffff81058631>] irq_exit+0x61/0xd0 [<ffffffff81018d25>] do_IRQ+0x65/0x110 [<ffffffff81672189>] common_interrupt+0x89/0x89 <EOI> [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200 [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20 [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40 [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220 [<ffffffff810336f8>] start_secondary+0x148/0x170 Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Turn ath_txq_lock/unlock() into static inlines.Toke Høiland-Jørgensen
These are one-line functions that just call spin_lock/unlock_bh(); turn them into static inlines to avoid the function call overhead. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Introduce airtime fairness scheduling between stationsToke Høiland-Jørgensen
This reworks the ath9k driver to schedule transmissions to connected stations in a way that enforces airtime fairness between them. It accomplishes this by measuring the time spent transmitting to or receiving from a station at TX and RX completion, and accounting this to a per-station, per-QoS level airtime deficit. Then, an FQ-CoDel based deficit scheduler is employed at packet dequeue time, to control which station gets the next transmission opportunity. Airtime fairness can significantly improve the efficiency of the network when station rates vary. The following throughput values are from a simple three-station test scenario, where two stations operate at the highest HT20 rate, and one station at the lowest, and the scheduler is employed at the access point: Before / After Fast station 1: 19.17 / 25.09 Mbps Fast station 2: 19.83 / 25.21 Mbps Slow station: 2.58 / 1.77 Mbps Total: 41.58 / 52.07 Mbps The benefit of airtime fairness goes up the more stations are present. In a 30-station test with one station artificially limited to 1 Mbps, we have seen aggregate throughput go from 2.14 to 17.76 Mbps. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: define all EEPROM fields in Little Endian formatMartin Blumenstingl
The ar9300_eeprom logic is already using only 8-bit (endian neutral), __le16 and __le32 fields to state explicitly how the values should be interpreted. All other EEPROM implementations (4k, 9287 and def) were using u16 and u32 fields with additional logic to swap the values (read from the original EEPROM) so they match the current CPUs endianness. The EEPROM format defaults to "all values are Little Endian", indicated by the absence of the AR5416_EEPMISC_BIG_ENDIAN in the u8 EEPMISC register. If we detect that the EEPROM indicates Big Endian mode (AR5416_EEPMISC_BIG_ENDIAN is set in the EEPMISC register) then we'll swap the values to convert them into Little Endian. This is done by activating the EEPMISC based logic in ath9k_hw_nvram_swap_data even if AH_NO_EEP_SWAP is set (this makes ath9k behave like the FreeBSD driver, which also does not have a flag to enable swapping based on the AR5416_EEPMISC_BIG_ENDIAN bit). Before this logic was only used to enable swapping when "current CPU endianness != EEPROM endianness". After changing all relevant fields to __le16 and __le32 sparse was used to check that all code which reads any of these fields uses le{16,32}_to_cpu. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Make the EEPROM swapping check use the eepmisc registerMartin Blumenstingl
There are two ways of swapping the EEPROM data in the ath9k driver: 1) swab16 based on the first two EEPROM "magic" bytes (same for all EEPROM formats) 2) field and EEPROM format specific swab16/swab32 (different for eeprom_def, eeprom_4k and eeprom_9287) The result of the first check was used to also enable the second swap. This behavior seems incorrect, since the data may only be byte-swapped (afterwards the data could be in the correct endianness). Thus we introduce a separate check based on the "eepmisc" register (which is part of the EEPROM data). When bit 0 is set, then the EEPROM format specific values are in "big endian". This is also done by the FreeBSD kernel, see [0] for example. This allows us to parse EEPROMs with the "correct" magic bytes but swapped EEPROM format specific values. These EEPROMs (mostly found in lantiq and broadcom based big endian MIPS based devices) only worked due to platform specific "hacks" which swapped the EEPROM so the magic was inverted, which also enabled the format specific swapping. With this patch the old behavior is still supported, but neither recommended nor needed anymore. [0] https://github.com/freebsd/freebsd/blob/50719b56d9ce8d7d4beb53b16e9edb2e9a4a7a18/sys/dev/ath/ath_hal/ah_eeprom_9287.c#L351 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: consistently use get_eeprom_rev(ah)Martin Blumenstingl
The AR5416_VER_MASK macro does the same as get_eeprom_rev, except that one has to know the actual EEPROM type (and providing a reference to that in a variable named "eep"). Additionally the eeprom_*.c implementations used the same shifting logic multiple times to get the eeprom revision which was also unnecessary duplication of get_eeprom_rev. Also use the AR5416_EEP_VER_MINOR_MASK macro where needed and introduce a similar macro (AR5416_EEP_VER_MAJOR_MASK) for the major version. Finally drop AR9287_EEP_VER_MINOR_MASK since it simply duplicates the already defined AR5416_EEP_VER_MINOR_MASK. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: replace eeprom_param EEP_MINOR_REV with get_eeprom_revMartin Blumenstingl
get_eeprom(ah, EEP_MINOR_REV) and get_eeprom_rev(ah) are both doing the same thing: returning the EEPROM revision (12 lowest bits). Make the code consistent by using get_eeprom_rev(ah) everywhere. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Add an eeprom_ops callback for retrieving the eepmisc valueMartin Blumenstingl
This allows deciding if we have to swap the EEPROM data (so it matches the system's native endianness) even if no byte-swapping (swab16, based on the first two bytes in the EEPROM) is needed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: indicate that the AR9003 EEPROM template values are little endianMartin Blumenstingl
The eepMisc field was not set explicitly. The default value of 0 means that the values in the EEPROM (template) should be interpreted as little endian. However, this is not clear until comparing the AR9003 code with the other EEPROM formats. To make the code easier to understand we explicitly state that the values are little endian - there are no functional changes with this patch. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15ath9k: Add a #define for the EEPROM "eepmisc" endianness bitMartin Blumenstingl
This replaces a magic number with a named #define. Additionally it removes two "eeprom format" specific #defines for the "big endianness" bit which are the same on all eeprom formats. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-05-26 03:04:53 +0000