summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/wmi.c
AgeCommit message (Collapse)Author
2014-07-18wil6210: add new register region for AGC tableVladimir Kondratiev
New register area defined in the firmware Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: use same mapping table for FW addr translation and debugfsVladimir Kondratiev
Use single data source for all information regarding the firmware memory map. With this change "ucode_xxx" regions disappears since they are in fact part of larger "upper area" region Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: fix for unreachable code in wmi_recv_cmdVladimir Kondratiev
As reported by Dan Carpenter <dan.carpenter@oracle.com>: The patch a715c7ddd65a: "wil6210: improve debug for WMI receive" from May 29, 2014, leads to the following static checker warning: drivers/net/wireless/ath/wil6210/wmi.c:746 wmi_recv_cmd() info: ignoring unreachable code. drivers/net/wireless/ath/wil6210/wmi.c 739 spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); 740 { 741 int q = queue_work(wil->wmi_wq, 742 &wil->wmi_event_worker); 743 wil_dbg_wmi(wil, "queue_work -> %d\n", q); 744 } 745 } 746 if (n > 1) ^^^^^^^^^^ We never reach this if statemtent. 747 wil_dbg_wmi(wil, "%s -> %d events processed\n", __func__, n); 748 } Exit loop with "break", not "return". Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: map additional registers on targetVladimir Kondratiev
New registers area introduced, mark corresponded address range as valid Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: debug print when scan request state changesVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: print more info about BSS foundVladimir Kondratiev
print essential info to dmesg Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-30wil6210: improve debug for WMI receiveVladimir Kondratiev
Print message if no events received. This should not happen. If it is, it points to the problem in firmware. Track also cases when multiple events processed in one IRQ Print information as soon as possible - mbox pointers and event header right after reading it. This helps to identify potential problem with memory allocation for the event buffer. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: detect scan timeoutsVladimir Kondratiev
If scan has not finished in some reasonable time (10sec), interpret it as if firmware error occurs but was not reported. Firmware should report scan completion for every scan request, so it is error condition indeed. Perform firmware recovery procedure. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: sync with the latest FW APIVladimir Kondratiev
- add pcp_max_assoc_sta to the struct wmi_pcp_start_cmd - enum for the scan ststus Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22wil6210: fix printouts for better readabilityVladimir Kondratiev
Reshuffle prints to consolidate firmware/hardware information report upon card init Convert print for unhandled MISC ISR bits to "debug" - it is normal situation and not an "error" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: fix race between disconnect and Tx NAPIVladimir Kondratiev
When disconnecting some CID, corresponded Tx vring get released. During vring release, all descriptors get freed. It is possible that Tx NAPI working on the same vring simultaneously. If it happens, descriptor may be double freed. To protect from the race above, make sure NAPI won't process the same vring. Introduce 'enabled' flag in the struct vring_tx_data. Proceed with Tx NAPI only if 'enabled' flag set. Prior to Tx vring release, clear this flag and make sure NAPI get synchronized. NAPI enablement status protected by wil->mutex, add protection where it was missing and check for it. During reset, disconnect all peers first, then proceed with the Rx vring. It allows for the disconnect flow to observe proper 'wil->status' and correctly notify cfg80211 about connection status change Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17wil6210: Block data till "data port open" reportedVladimir Kondratiev
When connection established, as reported by WMI_CONNECT_EVENTID, 4-way handshaking required for the secure connection is not done yet. It is indicated by another WMI event. Wait for it and only then allow data traffic. In case of non-secure connection, FW reports "data port open" immediately after connection. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: single station disconnectVladimir Kondratiev
implement del_station() method in the struct cfg80211_ops It allows to disconnect single peer from the AP Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Provide signal strength indicationVladimir Kondratiev
When notifying about Rx mgmt (ex: during scan), extract signal strength reported by the hardware. signal is not MBM, it is arbitrary units 0..100 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: per-connection statisticsVladimir Kondratiev
Calculate statistics per connection, report with "iw station dump" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: fix BACK status processingVladimir Kondratiev
When FW notifies about BACK status change, it provides ring ID. Process BA status for requested connection only. As for now, FW don't report Rx BACK status, it reports Tx one instead. As per current algorithm used in the firmware, imply Rx BACK state is in sync with Tx one Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Block ACKVladimir Kondratiev
When running multiple connections, hardware can't do BACK reordering and it should be done on the host. Model after mac80211's implementation. Drop RCU for now; to be re-added when BACK will be stabilized BACK handshaking is not implemented yet in the hardware, pretend it was done to support the way FW operating Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: multiple connect - initial supportVladimir Kondratiev
Enable multiple (up to 8 - HW/FW limitation) simultaneous connections. Each connection has its own CID (connection ID) that describes chip's beam-forming entity. Tx Vring should refer to correct CID for frame to reach its destination. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Tx management frameVladimir Kondratiev
Implement management frame passing. In order to receive frame on the other side, remain_on_channel() should be implemented as well Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-23cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-22wil6210: Enable TCP/UDP checksum HW offloadKirshenbaum Erez
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wil6210: Align WMI header with latest FWVladimir Kondratiev
FW guys changed header structure; align driver code Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wil6210: Send EAPOL frames using normal Tx queueVladimir Kondratiev
No more need for special processing of EAPOL, FW can now send EAPOL frames using normal Tx queue for TID 0 This fixes "schedule while atomic" bug - start_xmit called in softirq context; while WMI mechanism that was used may sleep. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wil6210: improve frame type reportingVladimir Kondratiev
Report FC from the frame itself, as auxiliary information includes only frame subtype. This is preparation for future changes, when DMG beacon (extension frame) may be reported through wmi_evt_rx_mgmt() Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wil6210: map more FW memoryVladimir Kondratiev
map card's back-door debug data Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wil6210: fix timeout for start_pcpVladimir Kondratiev
It may take up to 3500ms for the FW to start AP/PCP. Increase accordingly, adding some safety margin. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29wil6210: Don't use wdev->sme_stateVladimir Kondratiev
sme_state is private wdev's variable. Track connection state internally Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29wil6210: channel off by 1Vladimir Kondratiev
WMI commands wants channel index, that is channel - 1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: trace supportVladimir Kondratiev
Trace the following: - WMI cmd/event - log events - interrupts - Tx/Rx Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: temperature measurementVladimir Kondratiev
Firmware got support for temperature measurement. There are 2 temperature sensors: MAC and radio "not available" temperature - reported by FW as 0 or ~0 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: sync with new firmwareVladimir Kondratiev
Adjust driver for changes in the FW API. Noticeable changes in the FW are: - temperature sensing - infrastructure for multiple connections - infrastructure for P2P - signal strength indication This commit introduces only changes that are required to support same functionality as previous firmware, no new features. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: new SW resetVladimir Kondratiev
New firmware allows for shorter SW reset procedure. After SW reset, FW raises "fw done" IRQ, at this moment mailbox control structures are initialized, driver caches it. New status bit wil_status_reset_done introduced to track completion of the reset. It is set by "fw ready" irq, and required for WMI rx flow to access control structures. WMI Tx flow protected by other status bit, wil_status_fwready. It can't be set before wil_status_reset_done is set by design. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: headers clean-upVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: report all received mgmt framesVladimir Kondratiev
Pass to cfg80211 all management frames. Used by wpa_supplicant. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: use cfg80211_inform_bss_frame()Vladimir Kondratiev
Avoid unnecessary frame parsing Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: refactor connect_workerVladimir Kondratiev
Move wmi_connect_worker() to the main.c and change names for consistency. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: Fix garbage sent to the FW with wmi_set_ie()Vladimir Kondratiev
Extra reference was taken by mistake. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: handle WMI_BA_STATUS_EVENTIDVladimir Kondratiev
Firmware indicated block ack agreement status change. For now, just log it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13wil6210: handle linkup/linkdown WMI eventsVladimir Kondratiev
Firmware indicates linkup/linkdown when data path becomes ready. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-08drivers: net: Remove remaining alloc/OOM messagesJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. For the affected mallocs around these OOM messages: Converted kmallocs with multiplies to kmalloc_array. Converted a kmalloc/memcpy to kmemdup. Removed now unused stack variables. Removed unnecessary parentheses. Neatened alignment. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30wil6210: Never delete Rx chain with firmwareVladimir Kondratiev
Firmware crash on attempt to delete Rx chain. Driver part of Rx chain removed only in preparation for the target reset; as reset is the only flow that removes Rx chain in the firmware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: checkpatch warningsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: fix checkpatch CamelCase warningsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Fix "don't scan after connect" logicVladimir Kondratiev
When connect times out, scan was not re-enabled. Strictly say, it is firmware issue - it should issue "disconnect" event but it does not. Compensate in the driver. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Refactor rx init/finiVladimir Kondratiev
Move WMI related operations to wmi.c as helper functions Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-04wireless: add new wil6210 802.11ad 60GHz driverVladimir Kondratiev
This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-07-31 23:23:26 +0000