summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210
AgeCommit message (Collapse)Author
2017-08-31wil6210: ensure P2P device is stopped before removing interfaceLior David
User space can remove the P2P management interface while it is active (for example, while listen/search is active) and this can cause a crash. Ensure the P2P device is fully stopped before removing. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: increase connect timeoutLior David
Connect can take longer than current timeout in some scenarios, for example with long-range antenna array. Increase the timeout to support these scenarios. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: clear PAL_UNIT_ICR part of device resetDedy Lansky
When FW starts running it can get D0 to D3 interrupt that is a leftover from previous system suspend while FW was not running. As this interrupt is not relevant anymore, clear it part of device reset procedure. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: move pre-FW configuration to separate functionDedy Lansky
Re-arrange the code to have dedicated function for device configuration which takes place before FW starts running. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: align to latest auto generated wmi.hLazar Alexei
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: make debugfs compilation optionalGidon Studinski
Since debugfs is a kernel configuration option, enable the driver to compile without debugfs. Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com> Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31wil6210: ratelimit errors in TX/RX interruptsLior David
Sometimes there is a firmware crash but the hardware is not fully stopped and continue to send TX/RX interrupts. This can cause an overload of messages which can bring the host down. Add ratelimit to these error messages to fix this. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: move vring_idle_trsh definition to wil6210_privGidon Studinski
vring_idle_trsh is used in the operational driver, hence should not be defined as a debugfs variable. Signed-off-by: Gidon Studinski <qca_gidons@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: store FW RF calibration resultDedy Lansky
Store initial FW RF calibration result in driver. Set this calibration result back to FW after each FW reset in order to avoid future calibration procedures. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: fix interface-up checkHamad Kadmany
While wil_open is executed, any call to netif_running would return a success. In case there are failures within wil_open, should not treat the device as if it is already opened in relevant functions (like FW recovery and runtime suspend check). Fix that by checking the device up flag instead. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: notify wiphy on wowlan supportMaya Erez
Set wowlan to indicate that 11ad device can wake-up on any trigger and disconnect. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: add statistics for suspend timeMaya Erez
Add statistics for total, min and max suspend time, that calculates the time the 11ad device was in suspend. Those statistics will help to estimate the power impact of d3hot feature. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: check no_fw_recovery in resume failure recoveryMaya Erez
Reset 11ad device on resume failure only if no_fw_recovery is not set. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: support FW RSSI reportingDedy Lansky
New FW supports reporting RSSI signal in dBm. Report RSSI to kernel in case FW has this capability. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wil6210: protect against invalid length of tx management frameHamad Kadmany
Validate buffer length has the minimum needed size when sending management frame to protect against possible buffer overrun. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-25Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 New features and bug fixes to quite a few different drivers, but nothing really special standing out. What makes me happy that we have now more vendors actively contributing to upstream drivers. In this pull request we have patches from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I still have patches from Marvell and Quantenna pending in patchwork. Now that's something comparing to how things looked 11 years ago in Jeff Garzik's "State of the Union: Wireless" email: https://lkml.org/lkml/2006/1/5/671 Major changes: wil6210 * add low level RF sector interface via nl80211 vendor commands * add module parameter ftm_mode to load separate firmware for factory testing * support devices with different PCIe bar size * add support for PCIe D3hot in system suspend * remove ioctl interface which should not be in a wireless driver ath10k * go back to using dma_alloc_coherent() for firmware scratch memory * add per chain RSSI reporting brcmfmac * add support multi-scheduled scan * add scheduled scan support for specified BSSIDs * add support for brcm43430 revision 0 wlcore * add wil1285 compatible rsi * add RS9113 USB support iwlwifi * FW API documentation improvements (for tools and htmldoc) * continuing work for the new A000 family * bump the maximum supported FW API to 31 * improve the differentiation between 8000, 9000 and A000 families ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21wil6210: remove ioctl interfaceMaya Erez
Wireless drivers should not be using ioctl interface, hence remove this interface for wil6210 driver. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: add support for PCIe D3hot in system suspendMaya Erez
In order to preserve the connection in suspend/resume flow, wil6210 host allows going to PCIe D3hot state in suspend, instead of performing a full wil6210 device reset. This requires the platform ability to initiate wakeup in case of RX data. To check that, a new platform API is added. In addition, add cfg80211 suspend/resume callbacks implementation. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: prevent platform callbacks after uninitDedy Lansky
After calling platform_ops.uninit() it is still possible to invoke platform callbacks. To prevent this, zero platform_ops right after invoking uninit. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23wil6210: support devices with different PCIe bar sizeMaya Erez
wil6210 devices can have different PCIe bar size, hence get the bar size from PCIe device instead of using a constant bar size. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: Improve AP stop handlingHamad Kadmany
Set resetting flag early when stopping AP to avoid disconnect events as a result of disconnect command sent during AP stop procedure. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: add option to load FTM FWHamad Kadmany
Module parameter allows to load specific FW used for FTM testing. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-23wil6210: low level RF sector APILior David
Added vendor commands for low level control over RF sectors. It allows user space a fine-grained control over RF characteristics for TX and RX, such as direction and gain of TX/RX. Main usages are debugging and diagnostics, but also operational use cases. API includes getting/setting a specific RF sector configuration, as well as getting/setting the selected sector which is used to communicate with a station. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-05-19wil6210: use memdup_userGeliang Tang
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-24Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Quite a lot of patches for rtlwifi and iwlwifi this time, but changes also for other active wireless drivers. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers iwlwifi * work to support A000 devices continues * add support for FW API 30 * add Geographical and Dynamic Specific Absorption Rate (SAR) support * support a few new PCI device IDs rtlwifi * work on adding Bluetooth coexistance support, not finished yet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-next-for-davem-2017-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13wil6210: prevent access to 11AD device if resume failsMaya Erez
In case wil6210 resume fails, wil6210 suspend function will try to access the suspended device in the next kernel suspend. To prevent that, add wil_status_suspended flag to indicate if the device is already suspended and clear it only if the resume succeeds. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix array out of bounds access in pmcDedy Lansky
Array index 'i' is used before limits check. Fix this by doing limits check first. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: remove HALP voting in debugfs ioblobMaya Erez
debugfs ioblob function is called by the FW logs scripts to copy the FW logs via PCIe. As the FW logs collection is done in parallel to the operational 11AD actions, the HALP voting can take place during 11AD reset flow and other sensitive scenarios. To prevent that, remove HALP voting from the ioblob function. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix memory access violation in wil_memcpy_from/toio_32Dedy Lansky
In case count is not multiple of 4, there is a read access in wil_memcpy_toio_32() from outside src buffer boundary. In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is a write access to outside dst io memory boundary. Fix these issues with proper handling of the last 1 to 4 copied bytes. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix check for sparrow D0 FW fileHamad Kadmany
Driver fails to load FW for sparrow D0 devices in some cases. Fix this by returning correct value from wil_fw_verify_file_exists when D0 FW file is not detected for any reason. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: protect against sporadic interrupt during suspend flowMaya Erez
During the suspend flow, wil6210 HW can send sporadic interrupts, while PCIe bus is not operational. To prevent that, keep the interrupts disabled during the suspend flow and re-enable them only after PCIe enablement in resume. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix protection against connections during resetHamad Kadmany
Existing code that ignores connection events during reset flow will never take effect since it locks the same mutex taken by the reset flow. In addition, in case of unsolicited disconnect events ignore those as well since device is about to get reset. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: align to latest auto generated wmi.hDedy Lansky
Align to latest version of the auto generated wmi file describing the interface with FW Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: support 8KB RX buffersLior David
The 11ad spec requires 11ad devices to be able to receive 8KB packets over the air. Currently this is only possible by loading the driver with mtu_max=7912 but this also forces a smaller block ACK window size which reduces performance for stations which transmit normal sized packets (<2KB). Fix this problem as follows: 1. Add a module parameter rx_large_buf that when set, will allocate 8KB RX buffers regardless of mtu_max setting. 2. When receiving block ACK request agree to any window size not above our maximum, regardless of the mtu_max setting. This means if the other side transmits small packets (2KB) it can still set up block ACK with a large window size, and get better performance. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: restore power save state after internal FW resetLazar Alexei
The power save profile is set to default state in case of FW reset, regardless of the state before the reset took place. Fix this by saving the current power save profile and restore it in case of FW reset. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix sequence for scan-abort during resetHamad Kadmany
Communication with FW must be done before wil->status is initialized in order to properly handle cases where communication with FW halts during reset sequence. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-09wil6210: add oob_mode for AP certificationLior David
Add a new value to the oob_mode module parameter for supporting AP certification. All enabled values of oob_mode (>0) are intended only for debugging and diagnostics. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: correctly report locally generated disconnect in STA modeDedy Lansky
Driver always invoke cfg80211_disconnected() with locally_generated as false. Fix this by reporting true whenever the disconnect is triggered from upper layers (cfg80211) or from within the driver itself (reset, deinit). Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: use WMI_DISCONNECT_CMDID upon connect timeoutDedy Lansky
Upon connect timeout driver invokes _wil6210_disconnect() which iterates over sta array and disconnects each connected sta. In practice, because the connection is still ongoing and because cid is not yet allocated, disconnect is not actually happening. This leaves FW in connecting state while driver is in disconnected state. To fix this, upon connect timeout, explicitly send WMI_DISCONNECT_CMDID to FW to make sure it gets disconnected. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: protect list of pending wmi events during flushHamad Kadmany
When flush is done, pending events list is manipulated without taking the proper spinlock, which could lead to memory corruption if list is manipulated by wmi worker or by interrupt routine. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: store bss object and use cfg80211_connect_bss()Dedy Lansky
In a fast disconnect/connect sequence, cfg80211_connect_result() can fail to find the bss object which the driver is connecting to. Detailed sequence of events: * Driver is connected in STA mode * Disconnect request arrives from user space. Driver disconnects and calls cfg80211_disconnected() which adds new event to the cfg80211_wq worker thread * Connect request arrives from user space. cfg80211_connect() stores ssid/ssid_len and calls rdev_connect() * __cfg80211_disconnected() runs in worker thread and zero wdev->ssid_len * Connect succeeds. Driver calls cfg80211_connect_result() which fails to find the bss because wdev->ssid_len is zero To overcome this, upon connect request, store the bss object in the driver and upon connect completion pass it to kernel using cfg80211_connect_bss(). Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: missing reinit_completion in HALP votingMaya Erez
After setting HALP ICR bit, we keep it set until HALP unvote. Masking HALP ICR should protect the driver from hitting the HALP ICR over and over again. However, in case there is another MISC ICR we will read the HALP ICR and issue a completion. This can lead to a case where HALP voting is completed immediately, as the completion is already set. Reinit the HALP completion before the actual vote will clear previous completions and protect from such cases. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: use print_hex_dump_debug instead of print_hex_dump_bytesDedy Lansky
Some dynamic debug printouts in driver are using print_hex_dump_bytes. However, with dynamic debug disabled, print_hex_dump_bytes outputs to log unconditionally. Use print_hex_dump_debug instead to prevent log pollution when dynamic debug disabled. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: bus_request platform operation refinementLior David
The driver uses the bus_request platform operation to request resources from the platform for a specific bandwidth. Currently the driver requests resources for the maximum theoretical bandwidth, when interface is brought up. Refine this process a bit: now the driver will request a small amount of resources when interface is up, and will only issue the maximum request when connected. This mechanism will be improved further in the future to make more refined requests based on actual bandwidth. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-09wil6210: do not start regular scan on stopped p2p deviceLior David
The driver should not allow starting any type of scan on a stopped P2P device. Current implementation only checked social scan. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-04-15 07:04:40 +0000