summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2011-08-09ath5k: fix error handling in ath5k_beacon_sendBob Copeland
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k: fix a misprint which leads to incorrect calibrationAlex Hacker
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: update PMU to improve ripple issue for AR9485Rajkumar Manoharan
The commit ebefce3d13f8b5a871337ff7c3821ee140c1ea8a failed to set proper PMU value to address ripple issue for AR9485. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath9k_hw: Fix incorrect Tx control power in AR9003 templateRajkumar Manoharan
CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next ↵John W. Linville
into for-davem
2011-08-01ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabledStanislaw Gruszka
We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias <camilo@mesias.co.uk> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-01ath9k: initialize tx chainmask before testing channel tx power valuesFelix Fietkau
With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-07-22ath5k: use get_unaligned_le32() in ath5k_write_pwr_to_pdadc_table()Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: remove ath5k_hw_get_capability(), don't use VEOL on AR5210Pavel Roskin
There are only two capabilities we need, and both are trivial to find. ath5k_hw_hasbssidmask() is true on AR5212, but not on AR5210 or AR5211. ath5k_hw_hasveol() is true on AR5211 and AR5212, but not on AR5210, according to the HAL source. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: merge ath5k_{init, deinit}_hw() with their thin wrappersPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-21ath9k_hw: validate and fix broken eeprom chainmask settingsFelix Fietkau
Some devices (e.g. Ubiquiti AirRouter) ship with broken EEPROM chainmask data, which breaks the initial calibration after a hardware reset. To fix this, mask the eeprom chainmask with the chainmask of the chip, and use the chip chainmask if the result is zero. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20wireless: ath9k: use %pM to print MACAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com> Cc: ath9k-devel@lists.ath9k.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20carl9170: fix sparse warnings enabled by CONFIG_SPARSE_RCU_POINTERPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20ath5k: merge ath5k_hw and ath5k_softcPavel Roskin
Both ath5k_hw and ath5k_softc represent one instance of the hardware. This duplication is historical and is not needed anymore. Keep the name "ath5k_hw" for the merged structure and "ah" for the variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more descriptive and more widely used. Put the combined structure to ath5k.h where the old ath5k_softc used to be. Move some code from base.h to ath5k.h as needed. Remove memory allocation for struct ath5k_hw and the corresponding error handling. Merge iobase and ah_iobase fields. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath9k: Fix some smatch warningsRajkumar Manoharan
drivers/net/wireless/ath/ath9k/hif_usb.c +135 hif_usb_mgmt_cb(6) warn: variable dereferenced before check 'cmd' drivers/net/wireless/ath/ath9k/btcoex.c +77 ath9k_hw_init_btcoex_hw(38) error: buffer overflow 'ah->hw_gen_timers.gen_timer_index' 32 <= 2009813776 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath9k: Fix sparse warningsRajkumar Manoharan
drivers/net/wireless/ath/ath9k/init.c:199:21: warning: context imbalance in 'ath9k_reg_rmw' - different lock contexts for basic block drivers/net/wireless/ath/ath9k/xmit.c:1175:31: warning: context imbalance in 'ath_drain_txq_list' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:2047:23: warning: context imbalance in 'ath_tx_process_buffer' - unexpected unlock drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3041:24: warning: cast to restricted __le32 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18carl9170: set beacon xmit power to the maxChristian Lamparter
Harshal Chhaya discovered during network tests, that several of his clients dropped-off the network. The captured packets shows that the beacons sent by the AP are at a much lower power than the other data packets. The reason for this mishap: The driver never updated the beacon phy register, so all beacons were always sent at the lowest power. Reference: http://marc.info/?l=linux-wireless&m=131067225105801 Reported-by: Harshal Chhaya <harshal@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18carl9170: move beacon_update into tx.cChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18carl9170 firmware: update firmware headersChristian Lamparter
* reserves feature bit for CCA counters * extends hardware register file definitions Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath9k: use ath_opmode_to_string()Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath9k: remove defines in reg.h that exist in ../reg.hPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath9k: use get_unaligned_{b16, le16, le32} where possiblePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18ath: use get_unaligned_le{16,32} in ath_hw_keysetmac()Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15carl9170: fix formatting issues found by checkpatchPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-By: christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15ath9k: improve reliability of MIC error detectionFelix Fietkau
For unicast the hardware sometimes reports MIC errors even though the frame that it received actually contains a valid MIC - on some chips this can happen frequently enough to trigger TKIP countermeasures. Fix this issue by not reporting MIC errors for unicast frames with a valid key, letting mac80211 validate the MIC instead. Additionally, strip the MIC for all frames that the hardware considers valid to avoid wasting CPU cycles re-validating it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: net/bluetooth/l2cap_core.c
2011-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) slip: fix wrong SLIP6 ifdef-endif placing natsemi: fix another dma-debug report sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket net: Fix default in docs for tcp_orphan_retries. hso: fix a use after free condition net/natsemi: Fix module parameter permissions XFRM: Fix memory leak in xfrm_state_update sctp: Enforce retransmission limit during shutdown mac80211: fix TKIP replay vulnerability mac80211: fix ie memory allocation for scheduled scans ssb: fix init regression of hostmode PCI core rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M ath9k: Fix tx throughput drops for AR9003 chips with AES encryption carl9170: add NEC WL300NU-AG usbid cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex ath5k: fix incorrect use of drvdata in PCI suspend/resume code ath5k: fix incorrect use of drvdata in sysfs code Bluetooth: Fix memory leak under page timeouts Bluetooth: Fix regression with incoming L2CAP connections Bluetooth: Fix hidp disconnect deadlocks and lost wakeup ...
2011-07-13ath5k: do not call ieee80211_stop_queue for queues not managed by mac80211Felix Fietkau
Instead of using ieee80211_stop_queue, check the configured tx queue limit before calling ieee80211_get_buffered_bc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: disable 32KHz sleep clock operation by defaultFelix Fietkau
While 32 KHz sleep clock might provide some power saving benefits, it is also a major source of stability issues, on OpenWrt it produced some reproducible data bus errors on register accesses on several different MIPS platforms. All the Atheros drivers that I can find do not enable this feature, so it makes sense to leave it disabled in ath5k as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock usec duration setting restoreFelix Fietkau
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling it didn't restore it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: delay full calibration after resetFelix Fietkau
During scans the full calibration usually does not make much sense, PAPD probing and IQ calibration should be deferred until there is enough time to complete them. Adding 100 ms to the initial full calibration delay should be enough to do this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: initialize common->clockrateFelix Fietkau
Fixes a division by zero when setting distance before activating the device for the first time. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock frequency for spur mitigation on AR2413Felix Fietkau
AR2413 uses the same reference clock as AR5413 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: apply the synth voltage tweak only on AR5112 rev 2Felix Fietkau
Might fix some stability issues on newer chips Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: add missing checks for rfgain probeFelix Fietkau
rfgain probe is only necessary for OFDM operation on AR5111 and AR5112. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath9k_hw: Fix incorrect key_miss handlingSenthil Balasubramanian
Decryping frames on key_miss handling shouldn't be done for Michael MIC failed frames as h/w would have already decrypted such frames successfully anyway. Also leaving CRC and PHY error(where the frame is going to be dropped anyway), we are left to prcoess Decrypt error for which s/w decrypt is selected anway and so having key_miss as a separate check doesn't serve anything. So making key_miss handling mutually exlusive with other RX status handling makes much more sense. This patch addresses an issue with STA not reporting MIC failure events resulting in STA being disconnected immediately. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-11ath9k: remove an unnecessary function declarationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: fix typos, bad comment formatting and GHz in place of MHzPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: validate mode in ath5k_ani_init() before trying to set itPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: add a missing delay for an analog registerFelix Fietkau
AR_AN_SYNTH9 is in the analog shift register range and thus needs to be written using the ath9k_hw_analog_shift_rmw function. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: fix synth delay for half/quarter channelsFelix Fietkau
The radio needs twice / four times as much time to stabilize for half/quarter channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: set 5 GHz half/quarter channels on AR9002 using fractional modeFelix Fietkau
The radio seems to perform better that way Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: remove ar9287 v1.3+ specific hardcoded register hacksFelix Fietkau
Now that the clock rate is initialized properly and SIFS, EIFS, USEC, slot time and ACK timeout are properly calculated by the generic code, the 'async FIFO' register hacks are no longer necessary. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: initialize more timing related registers for half/quarter channelsFelix Fietkau
Initialize the the clock-to-TSF field of AR_USEC and the SIFS and EIFS time registers based on the clock rate instead of relying on initvals. With those changes, some of the hardcoded AR9287 1.3+ specific overrides can be dropped. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath9k_hw: fix MAC clock rate for AR9287 v1.3+Felix Fietkau
This chip uses the async FIFO feature and runs the MAC at 117 MHz Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-03-23 19:08:28 +0000