summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2015-08-06wil6210: report boot loader errorVladimir Kondratiev
Boot loader reports error starting from the struct v2. Print error info before reset (power up state) in debug mode, and print same info as error if target reset timed out. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: system power managementVladimir Kondratiev
Support for the system suspend/resume. In preparation for the run-time PM, implementation made run-time PM friendly: common for system and run-time PM code factored out as generic functions, albeit is_runtime parameter value is always false currently. For debug purposes, "PM" debug category introduced. Policy: AP-like interface can't be suspended; otherwise suspend is allowed. Hardware brought down if interface was up. Connection, if existed, get lost. Interface will be brought up upon resume if it was up before suspend. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: allow to handle Rx on 2 coresVladimir Shulman
Allow network stack part of Rx processing to run on separate core, relaxing CPU utilization on the core used for Rx NAPI. If RXHASH feature is enabled, the driver sets rxhash of each skb to 1 to enable RPS. The core for processing the rx skb is determined by RPS mechanism according to rx_cpus bit mask which is configured at user level. For processing skbs on different core from the core which processes the interrupts, it is recommended not to enable core 0 in rx_cpus bit mask. Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: use inline functions for register accessVladimir Kondratiev
Replace macros like "R", "W", "S", "C", defined multiple times, with inline functions "wil_[rwsc]". Use "readl" and "writel" instead of "ioread32" and "iowrite32" since it is granted that memory transactions are used, not port ones like IN/OUT Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: remove 3-MSI supportVladimir Kondratiev
In the recent kernel versions, multiple MSI is not well supported. In particular, it is not supported on x86 and ARM architectures. Also, internal interrupt handling logic is simpler and more effective when using single interrupt. Remove support for 3 MSI, convert module parameter "use_msi" from int with range [0,1,3] to boolean. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: detailed statistics for Rx reorder dropVladimir Kondratiev
Rx drops may be for 2 reasons: frame is old, or it is duplicate. On the debugfs "stations" entry, provide counters per reorder buffer for total frames processed, drops for these 2 reasons. Also add debug print for dropped frames. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: unify wmi_set_ie() error handlingVladimir Kondratiev
When printing error message, provide string describing IE kind. Derive it from IE type This allows removing of error messages printing in callers Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: sort IEs handlingVladimir Kondratiev
sort overall IE's handling prepare code (disabled for now) to add IEs for the beacon Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: treat "unhandled event" as warning instead of errorDedy Lansky
FW is allowed to generate WMI events that are not handled by this driver. Treat such case as warning instead of error. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: improve mgmt frame handlingVladimir Kondratiev
Check event length; hex dump both Rx and Tx frames Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: TSO implementationVladimir Kondratiev
Driver report supported TSO (v4 & v6) and IP checksum offload in addition to previously supported features. In data path skbs are checked for non-zero gso_size, and when detected sent to additional function for processing TSO SKBs. Since HW does not fully support TSO, additional effort is required from the driver. Driver partitions the data into mss sized descriptors which are then DMAed to the HW. Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: skip HW version check for chip debuggingVladimir Kondratiev
When loading with debug_fw flag, do not bail out on unknown chipId Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: use wil_fw_error_recovery()Vladimir Kondratiev
Use function wil_fw_error_recovery() instead of inline equivalent code Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: wait for del_station to completeVladimir Kondratiev
Multiple del_station requests may be sent to the driver by the supplicant when turning down AP. This may overflow mailbox between the FW and ucode Wait till disconnect of one STA completed before sending next command. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: use <> vs. "" for global includeVladimir Kondratiev
linux/device.h should be included using <>, not "" since it is not local include Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: print "ulong" fields in hex format in the debugfsVladimir Kondratiev
In the debugfs, there is "ulong" attribute printing. It is used for bitmap printing, and more appropriate format would be hexadecimal, not decimal. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: count drops in Rx block ack reorderVladimir Kondratiev
When performing Rx reordering, count skb's dropped per reorder buffer; and print dropped packets count on the "stations" debugfs entry Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: support boot loader struct v0 & v1Vladimir Kondratiev
There are 2 versions of boot loader struct: v0 and v1. In the v1, boot loader build version added; as well as RF status. Support both versions. Boot loader structure v1 has RF status; ignore RF error if firmware not going to be loaded; driver can still be used to interact with the HW Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-31Merge tag 'wireless-drivers-next-for-davem-2015-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: mwifiex: * add TX DATA Pause support * add multichannel and TDLS channel switch support ath10k: * enable VHT for IBSS * initial work to support qca99x0 and the corresponding 10.4 firmware branch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Revert "ath9k: export HW random number generator"Kalle Valo
This reverts commit 6301566e0b2dafa7d6779598621bca867962a0a2. Oleksij Rempel noticed that the randomness doesn't look to be good enough and Stephan Mueller commented: "I would say that the discussed RNG does not seem fit for hooking it up with the hwrandom framework." http://lkml.kernel.org/g/3945775.m5HblJPgiO@tauon.atsec.com So let's the revert the patch until we are sure that we can trust this random generator. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-30ath10k: initialize msdu ext. descriptor before usePeter Oh
Initial QCA99X0 support has a known issue with TCP Tx throughput. All other path such as UDP Tx/Rx and TCP Rx meet their expectation (> 900Mbps), but TCP Tx marked as low as 5Mbps when single pair is used on iperf. The root cause is turned out because TSO flag is not initialized properly so that firmware configures TSO in wrong way. TSO flags in msdu extension descriptor is required to be reset to indicate firmware there is no TSO is enabled, otherwise it could act as TSO is enabled which causes huge throughput drop. In fact, it's enough by resetting TSO flags only to prevent the unexpected behavior, but initializing whole msdu ext. descriptor will help to clear uncertainty of firmware could bring on as it constantly updated. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-30ath10k: add QCA99X0 to supported device listVasanthakumar Thiagarajan
Add vendor/device id of QCA99X0 V2.0 to pci id table and QCA99X0_HW_2_0_CHIP_ID_REV to ath10k_pci_supp_chips[] for QCA99X0 to get detected by the driver. kvalo: now QCA99X0 family of chipsets is supported by ath10k. Tested client, AP and monitor mode with QCA9990. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-30ath10k: increase max client to 512 in qca99x0Raja Mani
When max client was set to 512 in qca99x0, there was host memory alloc failure during wmi service ready event handling. This issue got resolved now, increasing max client limit from 256 to 512. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-30ath10k: fix memory alloc failure in qca99x0 during wmi svc rdy eventRaja Mani
Host memory required for firmware is allocated while handling wmi service ready event. Right now, wmi service ready is handled in tasklet context and it calls dma_alloc_coherent() with atomic flag (GFP_ATOMIC) to allocate memory in host needed for firmware. The problem is, dma_alloc_coherent() with GFP_ATOMIC fails in the platform (at least in AP platform) where it has less atomic pool memory (< 2mb). QCA99X0 requires around 2 MB of host memory for one card, having additional QCA99X0 card in the same platform will require similarly amount of memory. So, it's not guaranteed that all the platform will have enough atomic memory pool. Fix this issue, by handling wmi service ready event in workqueue context and calling dma_alloc_coherent() with GFP_KERNEL. mac80211 work queue will not be ready at the time of handling wmi service ready. So, it can't be used to handle wmi service ready. Also, register work gets scheduled during insmod in existing ath10k_wq and waits for wmi service ready to completed. Both workqueue can't be used for this purpose. New auxiliary workqueue is added to handle wmi service ready. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-29ath10k: enable raw encap mode and software crypto engineDavid Liu
This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-29ath10k: Improve performance by reducing tx_lock contentionQi Zhou
During tx completion, tx_lock is held for longer than required, preventing efficient refill of htt->pending_tx. Refactor the code so that only MSDU related operations are protected by the lock. Improves downstream performance on a dual-core ARM Freescale LS1024A (f.k.a. Mindspeed Comcerto 2000) AP with a 3x3 client from 495 to 580 Mbps. Other CPU bound multicore systems may also benefit. Signed-off-by: Denton Gentry <dgentry@google.com> Signed-off-by: Avery Pennarun <apenwarr@google.com> [mfaltesek@google.com: removed conflicting code for tracking msdu_ids.] Signed-off-by: Marty Faltesek <mfaltesek@google.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-29ath10k: suppress 'failed to process fft' warning messagesKevin Darbyshire-Bryant
When using DFS channels on Ath10k, kernel log has repeated warning message 'failed to process fft: -22' typically under medium/heavy traffic. This patch switches the warnings to driver debug (WMI events) mode only thus reducing log file noise. DFS and spectral scan share underlying HW mechanisms and enabling one (DFS) enables the other (spectral scan) as far as event reporting from firmware to driver is concerned. Spectral scan events take no part in processing of DFS radar pulses which are delivered as distinct events, so the fft (spectral event) warning is harmless and DFS interference detection/protection still occurs. Symptoms seen & fix tested in both debug & non-debug modes on TP-Link Archer C7 v2 platform. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-29ath6kl: spell "distribution" correctly in a comment.Nik Nyby
This fixes two misspellings of "distribution" in a comment. Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: extend struct htt_mgmt_tx_dec for qca99x0Raja Mani
HTT_H2T_MSG_TYPE_MGMT_TX msg in 10.4 firmware carries additional 4 byte in htt_mgmt_tx_desc where it tells to firmware that at what rate mgmt frame has to go out in the air. It's an optional parameter, setting this field to zero will force firmware to choose auto rate and send the frame out. Those 4 byte info is missed out in the current code and 10.4 firmware ended up reading some junk in those 4 byte and sometime malfunctioning. Fix it by adding 4 byte in struct htt_mgmt_tx_desc. Non 10.4 firmware will not process those four byte. So, adding 4 byte at the end of struct htt_mgmt_tx_desc will not create any impact on other chipset. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: add TCP/UDP Checksum offload support for QCA99x0Manikanta Pubbisetty
The patch adds support to offload TCP/UDP checksum calculations for QCA99x0. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: fix wrong initialization of struct channelManinder Singh
chandef is initialized with NULL and on the very next line, we are using it to get channel, which is not correct. Channel should be initialized after obtaining chandef. Found by cppcheck: ath/ath10k/mac.c:839]: (error) Possible null pointer dereference: chandef Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: add support for qca99x0 Rx descriptorsPeter Oh
QCA99X0 chip has an extra 4 bytes in rx_msdu_start, 20 bytes in rx_msdu_end and 20 bytes in rx_ppdu_end structure which are used in htt_rx_desc and HTT Rx ring offset setup. This is necessary for correct Rx for QCA99X0 or Rx descriptors will be overwritten and corrupted. With this patch QCA988X and QCA6174 will have extra 44 bytes padding in Rx descriptor layout which is harmless. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: redefine rx_ppdu_end_common structure to cover qca99x0Peter Oh
rx_ppdu_end_common structure is valid for both of qca998x and qca6174, but not for qca99x0 since it has new additional members. Hence update the common structure to cover qca99x0 as well. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: update tx path to support QCA99X0Peter Oh
Since QCA99X0 uses fragmentation descriptor differently from other ones on tx path, we need to handle it separately. QCA99X0 is using 48 bits for address and 16 bits for length out of 2 dword and each values have to be programmed by frag desc base addr + msdu id, so that hardware can retrieve corresponding frag data. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: delay device access after cold resetVasanthakumar Thiagarajan
It is observed that during cold reset pcie access right after a write operation to SOC_GLOBAL_RESET_ADDRESS causes Data Bus Error and system hard lockup. The reason for bus error is that pcie needs some time to get back to stable state for any transaction during cold reset. Add delay of 20 msecs after write of SOC_GLOBAL_RESET_ADDRESS to fix this issue. This patch is tested on QCA988X. This is also tested on QCA99X0 which is WIP. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-21ath9k: export HW random number generatorMiaoqing Pan
We measured the FFT-based entropy in 3 ways, Shannon entropy, collision entropy, and directly measured min-entropy. Just to be conservative, we recommend the estimated min-Entropy to be 10 bits per 16-bit value. Analysis was done by Jacobson,David(djacobso@qti.qualcomm.com). Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21ath9k: Fix register definitions for QCA956xMiaoqing Pan
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21ath9k: fix moredata flag endianness in cabq txMichal Kazior
While compiling ath9k with some extra flags I've found that: ath9k/xmit.c +2473 ## 16: warning: restricted __le16 degrades to integer ath9k/xmit.c +2474 ## 36: warning: invalid assignment: &= ath9k/xmit.c +2474 ## 36: left side has type restricted __le16 ath9k/xmit.c +2474 ## 36: right side has type int There's no way for frame ftype/stype to be mistreated as the offending 'moredata' flag when considering cab queue. This could've however theoretically led sometimes to increased power consumption on connected stations as they would keep their Rx active waiting for frames that would never come. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21ath9k: make DMA stop related messages debug-onlyFelix Fietkau
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21Merge ath-next from ath.git.Kalle Valo
Major changes in ath10k: * enable VHT for IBSS * initial work to support qca99x0 and the corresponding 10.4 firmware branch
2015-07-11ath9k_hw: fix device ID check for AR956xFelix Fietkau
Because of the missing return, the macVersion value was being overwritten with an invalid register read Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ath9k: DFS - add pulse chirp detection for FCCZefir Kurtisi
FCC long pulse radar (type 5) requires pulses to be checked for chirping. This patch implements chirp detection based on the FFT data provided for long pulses. A chirp is detected when a set of criteria defined by FCC pulse characteristics is met, including * have at least 4 FFT samples * max_bin index moves equidistantly between samples * the gradient is within defined range The chirp detection has been tested with reference radar generating devices and proved to work reliably. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ath9k: DFS - consider ext_channel pulses only in HT40 modeZefir Kurtisi
The chip reports radar pulses on extension channel even if operating in HT20 mode. This patch adds a sanity check for HT40 mode before it feeds pulses on extension channel to the pattern detector. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-11ath10k: tweak interface combinationsMichal Kazior
Concurrent AP/GO operation on different channels isn't really supported well by the firmware so it's better to remove it from being advertised. Also tune the way station and p2p client interface limits are expressed to allow station + 2x p2p client or station + p2p client + p2p go. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix per-vif queue lockingMichal Kazior
Whenever any vdev was supposed to be paused all Tx queues were stopped (except offchannel) instead of only these associated with the given vdev. This caused subtle issues with multi-channel/multi-vif scenarios, e.g. authentication of station vif could sometimes fail depending on fw tx pause request timing. Fixes: b4aa539dd8f2 ("ath10k: implement tx pause wmi event") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: update vdev ps state on startMichal Kazior
Psmode can be forcefully enabled when vdev isn't started. It isn't guaranteed that mac80211 will re-issue psmode setting after vdev is started unless actual bss_conf.ps value has changed. Even if this doesn't fix any problems now it may prevent future breakage. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix hw roc expiration notifcationMichal Kazior
The expiration function must not be called when roc is explicitly cancelled by mac80211. However since fcf9844636be ("ath10k: fix hw roc expiration") the notification was never sent when roc actually expired. This fixes some P2P connection setup issues. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: limit multi-vif ps more aggresivellyMichal Kazior
Further testing proved that multi-channel AP+STA on QCA6174 with RM.2.0-00088 should have powersave force-disabled to avoid beacon misses/skipping on either side which in turn could disrupt communication. Since AP never has arvif->ps don't even bother checking it. Other combinations may be broken as well so disallow powersave with multivif outright unless firmware advertises otherwise. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: don't set cck/ofdm scan flagsMichal Kazior
mac80211 already does provide complete IEs for Probe Requests for hw scan and ath10k firmware was appending duplicate Supported Rates IEs unnecessarily. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: Fix target to cpu address conversion logicVasanthakumar Thiagarajan
In commit 418ca5992e2f ("ath10k: Make target cpu address to CE address conversion chip specific") mask 0x7fff is added by mistake instead of 0x7ff. Fix this regression. Fixes: 418ca5992e2f ("ath10k: Make target cpu address to CE address conversion chip specific") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-05-04 11:23:11 +0000