summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
AgeCommit message (Collapse)Author
2018-01-11brcmfmac: rename brcmf_sdiod_buff_{read,write}() functionsArend Van Spriel
Rename functions to brcmf_sdio_skbuff_{read,write}() as we pass an skbuff to this function. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-11brcmfmac: Remove array of functionsArend Van Spriel
Replace the array of functions with a pair of pointers to the relevant functions. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Clean up interrupt macrosIan Molton
Make it more obvious that this code acually enables interrupts, and provide nice definitions for the bits in the register. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Replace function index with function pointerIan Molton
In preparation for removing the function array, remove all code that refers to function by index and replace with pointers to the function itself. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: replace BUG() with WARN() macro] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Remove func0 from function arrayIan Molton
func0 is not provided by the mmc stack as a function when probing. Instead providing specific access functions to read/write it. This prepares for a patch to remove the actual array entry itself. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: rephrased the commit message] [arend: removed unrelated comment for which separate patch is warranted] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Correctly handle accesses to SDIO func0Ian Molton
Rather than workaround the restrictions on func0 addressing in the driver, set MMC_QUIRK_LENIENT_FN0 Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: stabilise the value of ->sbwad in use for some xfer routines.Ian Molton
The IO functions operate within the Chipcommon IO window. Explicitly set this, rather than relying on the last initialisation IO access to leave it set to the right value by chance. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: remove unnecessary call to brcmf_sdiod_set_backplane_window()Ian Molton
All functions that might require the window address changing call brcmf_sdiod_set_backplane_window() prior to access. Thus resetting the window is not required. Signed-off-by: Ian Molton <ian@mnementh.co.uk> [arend: corrected the driver prefix in the subject] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: Remove brcmf_sdiod_addrprep()Ian Molton
This function has become trivial enough that it may as well be pushed into its callers, which has the side-benefit of clarifying what's going on. Remove it, and rename brcmf_sdiod_set_sbaddr_window() to brcmf_sdiod_set_backplane_window() as it's easier to understand. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: Tidy register definitions a littleIan Molton
Trivial tidy of register definitions. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: Rename / replace old IO functions with simpler ones.Ian Molton
Primarily this patch removes: brcmf_sdiod_f0_writeb() brcmf_sdiod_reg_write() brcmf_sdiod_reg_read() Since we no longer use the quirky method of deciding which function to address via the address being accessed, take the opportunity to rename some IO functions more in line with common kernel code. We also convert those that map directly to sdio_{read,write}*() to macros. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: Clarify if using braces.Ian Molton
Whilst this if () statement is technically correct, it lacks clarity. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: whitespace fixes in brcmf_sdiod_send_buf()Ian Molton
Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: mention function in patch subject] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14brcmfmac: Split brcmf_sdiod_buffrw function up.Ian Molton
This function needs to be split up into separate read / write variants for clarity. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Rename bcmerror to errIan Molton
Trivial cleanup of nasty variable name Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Remove noisy debugging.Ian Molton
If you need debugging this low level, you're doing something wrong. Remove these noisy debug statements so the code is more readable. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Fix asymmetric IO functions.Ian Molton
Unlikely to be a problem, but brcmf_sdiod_regrl() is not symmetric with brcmf_sdiod_regrb() in initializing the data value on stack. Fix that. Signed-off-by: Ian Molton <ian@mnementh.co.uk> [arend: reword the commit message a bit] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Remove brcmf_sdiod_request_data()Ian Molton
This function is obfuscating how IO works on this chip. Remove it and push its logic into brcmf_sdiod_reg_{read,write}(). Handling of -ENOMEDIUM is altered, but as that's pretty much broken anyway we can ignore that. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Remove bandaid for SleepCSRIan Molton
Register access code is not the place for band-aid fixes like this. If this is a genuine problem, it should be fixed further up in the driver stack. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Remove dead IO codeIan Molton
The value passed to brcmf_sdiod_addrprep() is *always* 4 remove this parameter and the unused code to handle it. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Clean up brcmf_sdiod_set_sbaddr_window()Ian Molton
This function sets the address of the IO window used for SDIO accesses onto the backplane of the chip. It currently uses 3 separate masks despite the full mask being defined in the code already. Remove the separate masks and clean up. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Split brcmf_sdiod_regrw_helper() up.Ian Molton
This large function is concealing a LOT of obscure logic about how the hardware functions. Time to split it up. This first patch splits the function into two pieces - read and write, doing away with the rw flag in the process. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Register sizes on hardware are not dependent on compiler typesIan Molton
The 4 IO functions in this patch are incorrect as they use compiler types to determine how many bytes to send to the hardware. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb()Ian Molton
All the other IO functions are the other way round in this driver. Make this one match. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: Add support for CYW4373 SDIO/USB chipsetChi-Hsien Lin
Add support for CYW4373 SDIO/USB chipset. CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support. It's a WiFi/BT combo device. Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21brcmfmac: initialize oob irq data before request_irq()Michał Mirosław
This fixes spin-forever in irq handler when IRQ is already asserted at request_irq() time. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chainPeter S. Housel
An earlier change to this function (3bdae810721b) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Cc: stable@vger.kernel.org # 4.9.x- Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BFMartin Blumenstingl
BCM43455 is a more recent revision of the BCM4345. Some of the BCM43455 got a dedicated SDIO device ID which is currently not supported by brcmfmac. Adding the new sdio_device_id to brcmfmac is enough to get the BCM43455 supported because the chip itself is already supported (due to BCM4345 support in the driver). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: initialize variable in brcmf_sdiod_regrl()Arend Van Spriel
In case of an error the variable returned is uninitialized. The caller will probably check the error code before using it, but better assure it is set to zero. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09brcmfmac: add support for bcm4339 chip with modalias sdio:c00v02D0d4339Arend Van Spriel
The driver already supports the bcm4339 chipset but only for the variant that shares the same modalias as the bcm4335, ie. sdio:c00v02D0d4335. It turns out that there are also bcm4339 devices out there that have a more distiguishable modalias sdio:c00v02D0d4339. Reported-by: Steve deRosier <derosier@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chainFlorian Fainelli
In case brcmf_sdiod_recv_chain() cannot complete a succeful call to brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we should, fix this. Reported-by: coverity (CID 1164856) Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-04brcmfmac: Fix 'did not remove int handler' warningChristian Daudt
brcmf_sdiod_intr_unregister call that removes both func1 and func2 interrupt handlers only called when brcmf_ops_sdio_remove is called for func 1 (which is the 2nd call) but sdio is expecting it to be removed at the end of each sdio_remove call. This is causing 'rmmod bcmrfmac' on a 4356-sdio chip to complain with: WARNING: driver brcmfmac did not remove its interrupt handler! The modification makes calling brcmf_sdiod_intr_unregister multiple times harmless by clearing the variables that track if interrupt handlers have been installed, and then calls it on every brcmf_ops_sdio_remove call instead of just remove for func 1. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-04brcmfmac: Fix kernel oops in failed chip_attachChristian Daudt
When chip attach fails, brcmf_sdiod_intr_unregister is being called but that is too early as sdiodev->settings has not been set yet nor has brcmf_sdiod_intr_register been called. Change to use oob_irq_requested + newly created sd_irq_requested to decide on what to unregister at intr_unregister time. Steps to reproduce problem: - modprobe brcmfmac using buggy FW - rmmod brcmfmac - modprobe brcmfmac again. If done with a buggy firmware, brcm_chip_attach will fail on the 2nd modprobe triggering the call to intr_unregister and the kernel oops when attempting to de-reference sdiodev->settings->bus.sdio which has not yet been set. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-11brcmfmac: Add 4356 sdio supportChristian Daudt
This adds support for the 4356-sdio wireless chip. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06brcmfmac: uninitialized "ret" variableDan Carpenter
There is an error path where "ret" isn't initialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: merge platform data and module paramatersHante Meuleman
Merge module parameters and platform data in one struct. This is the last step to move to the new platform data per device. Now parameters of platform data will be merged with module parameters per device. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: switch to new platform dataHante Meuleman
Platform data is only available for sdio. With this patch a new platform data structure is being used which allows for platform data for any device and configurable per device. This patch only switches to the new structure and adds support for SDIO devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07brcmfmac: move platform data retrieval code to commonHante Meuleman
In preparation of module parameters for all devices the module platform data retrieval is moved from sdio to common. It is still only used for sdio devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-19brcmfmac: fix sdio sg table alloc crashHante Meuleman
With commit 7d34b0560567 ("brcmfmac: Move all module parameters to one place") a bug was introduced causing a null pointer exception. This patch fixes the bug by initializing the sg table till after the settings have been initialized. Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: Move all module parameters to one placeHante Meuleman
Module parameters are defined in several files. Move them in one place and make them device specific or global. This makes it easier to override device specific settings by external data like platform data in the future. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18brcm80211: move under broadcom vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2024-06-10 16:17:49 +0000