summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2022-12-08wifi: brcmfmac: introduce BRCMFMAC exported symbols namespaceArend van Spriel
Using a namespace variant to make clear it is only intended to be used by the vendor-specific modules. The symbol will only truly export the symbols when the driver and consequently the vendor-specific part are built as kernel modules. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-8-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add vendor name in revinfo debugfs fileArend van Spriel
Upon probe the driver determines the vendor supporting the device. Expose this information in the revinfo debugfs file. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-7-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support Broadcom BCA firmware apiArend van Spriel
Broadcom BCA division develops its own firmware api and as such will likely diverge over time (or already has). Add support for handling this. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-6-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support for Cypress firmware apiArend van Spriel
Cypress uses the brcmfmac driver and releases firmware which will likely diverge over time (or already has). So adding support for handling that. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-5-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support for vendor-specific firmware apiArend van Spriel
The driver is being used by multiple vendors who develop the firmware api independently. So far the firmware api as used by the driver has not diverged (yet). This change adds framework for supporting multiple firmware apis. The vendor-specific support code has to provide a number of callback operations. Right now it is only attach and detach callbacks so no real functionality as the api is still common. This code only adds WCC variant anyway, which is selected for all devices right now. The vendor-specific part will be built in a separate module when the driver is configured to be built as a module through Kconfig, ie. when CONFIG_BRCMFMAC=m. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-4-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add firmware vendor info in driver infoArend van Spriel
In order to determine the vendor that released a firmware image for a specific device, the device table now sets the vendor identifier in driver info and it is stored in struct brcmf_bus::fwvid during probe. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-3-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add function to unbind device to bus layer apiArend van Spriel
Introduce a new bus callback .remove() which will unbind the device from the driver. This allows the common driver layer to stop handling a device. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-2-arend.vanspriel@broadcom.com
2022-12-01wifi: brcmfmac: Check the count value of channel spec to prevent ↵Minsuk Kang
out-of-bounds reads This patch fixes slab-out-of-bounds reads in brcmfmac that occur in brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count value of channel specifications provided by the device is greater than the length of 'list->element[]', decided by the size of the 'list' allocated with kzalloc(). The patch adds checks that make the functions free the buffer and return -EINVAL if that is the case. Note that the negative return is handled by the caller, brcmf_setup_wiphybands() or brcmf_cfg80211_attach(). Found by a modified version of syzkaller. Crash Report from brcmf_construct_chaninfo(): ================================================================== BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430 Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896 CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0.cold+0x93/0x334 kasan_report.cold+0x83/0xdf brcmf_setup_wiphybands+0x1238/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 Allocated by task 1896: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 kmem_cache_alloc_trace+0x19e/0x330 brcmf_setup_wiphybands+0x290/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888115f24000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1536 bytes inside of 2048-byte region [ffff888115f24000, ffff888115f24800) Memory state around the buggy address: ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Crash Report from brcmf_enable_bw40_2g(): ================================================================== BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0 Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896 CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0.cold+0x93/0x334 kasan_report.cold+0x83/0xdf brcmf_cfg80211_attach+0x3d11/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 Allocated by task 1896: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 kmem_cache_alloc_trace+0x19e/0x330 brcmf_cfg80211_attach+0x3302/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888103787000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1536 bytes inside of 2048-byte region [ffff888103787000, ffff888103787800) Memory state around the buggy address: ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
2022-11-28wifi: b43: remove reference to removed config B43_PCMCIALukas Bulwahn
Commit 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver") removes the config B43_PCMCIA. Clean up the last reference to this removed config B43_PCMCIA in the b43_print_driverinfo() function. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221122131248.23738-1-lukas.bulwahn@gmail.com
2022-11-22wifi: brcmfmac: Use struct_size() in code ralated to struct brcmf_dload_data_leGustavo A. R. Silva
Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count where count is the max number of items the flexible array is supposed to contain. In this particular case, in the open-coded version sizeof(typeof-flex-array-elements) is implicit in _count_ because the type of the flex array data is u8: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h:941: 941 struct brcmf_dload_data_le { 942 __le16 flag; 943 __le16 dload_type; 944 __le32 len; 945 __le32 crc; 946 u8 data[]; 947 }; Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/41845ad3660ed4375f0c03fd36a67b2e12fafed5.1668548907.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: replace one-element array with flexible-array member in ↵Gustavo A. R. Silva
struct brcmf_dload_data_le One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_dload_data_le. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/230 Link: https://github.com/KSPP/linux/issues/79 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/905f5b68cf93c812360d081caae5b15221db09b6.1668548907.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: Use struct_size() and array_size() in code ralated to struct ↵Gustavo A. R. Silva
brcmf_gscan_config Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count where count is the max number of items the flexible array is supposed to contain. Also, use array_size() in call to memcpy(). Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/de0226a549c8d000d8974e207ede786220a3df1a.1668466470.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_gscan_config. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/241 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/7694550aa9a2753a73a687f61af9441c8cf52fd7.1668466470.git.gustavoars@kernel.org
2022-11-18Merge tag 'wireless-next-2022-11-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08wifi: brcmfmac: Avoiding Connection delayPrasanna Kerekoppa
Channel info passed by supplicant is not given to firmware. This causes delay (about 3seconds) due to full scan. Supplicant already provides the channel info for the specific SSID. channel_hint carries this channel info for the connect call back. Patch has been verified on 43012 and 43455. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-4-ian.lin@infineon.com
2022-11-08wifi: brcmfmac: Fix for when connect request is not successWataru Gohda
Currently brcmfmac is expecting to be set for both BRCMF_VIF_STATUS_EAP_SUCCESS and BRCMF_VIF_STATUS_EAP status bit based on dongle event and those bits are cleared to complete connect request successfully. But when connect request is finished unsuccessfully, either BRCMF_VIF_STATUS_EAP_SUCCESS / BRCMF_VIF_STATUS_EAP bits are not cleared depending on how the connect fail event happens. These status bits are carried over to following new connect request and this will lead to generate below kernel warning for some case. Worst case status mismatch happens between dongle and wpa_supplicant. WARNING: ../net/wireless/sme.c:756 __cfg80211_connect_result+0x42c/0x4a0 [cfg80211] The fix is to clear the BRCMF_VIF_STATUS_EAP_SUCCESS / BRCMF_VIF_STATUS_EAP bits during the link down process and add to call link down process when link down event received during BRCMF_VIF_STATUS_CONNECTING as well as BRCMF_VIF_STATUS_CONNECTED state. Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-3-ian.lin@infineon.com
2022-11-08wifi: brcmfmac: correctly remove all p2p vifBrian Henriquez
When deleting a P2P AGO interface we should make sure that relevant entry in bss_idx[] array is removed. We were always removing only 'vif' at P2PAPI_BSSCFG_CONNECTION before, regardless of the number of created P2P AGO interfaces. brcmfmac: correctly remove all p2p vif Signed-off-by: Brian Henriquez <brian.henriquez@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-2-ian.lin@infineon.com
2022-11-04wifi: brcmfmac: Fix potential NULL pointer dereference in ↵Jisoo Jang
'brcmf_c_preinit_dcmds()' This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when ptr which is NULL pointer passed as an argument of strlcpy() in brcmf_c_preinit_dcmds(). This happens when the driver passes a firmware version string that does not contain a space " ", making strrchr() return a null pointer. This patch adds a null pointer check. Found by a modified version of syzkaller. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 1983 Comm: kworker/0:2 Not tainted 5.14.0+ #79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: brcmf_c_preinit_dcmds+0x9f2/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1703/0x1dd0 ? kmemdup+0x43/0x50 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x2aa/0x760 ? usb_probe_device+0x250/0x250 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x46/0x160 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? wait_for_completion+0x290/0x290 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 usb_set_configuration+0xf59/0x16f0 usb_generic_driver_probe+0x82/0xa0 usb_probe_device+0xbb/0x250 ? usb_suspend+0x590/0x590 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? usb_generic_driver_match+0x75/0x90 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? _raw_spin_unlock_irqrestore+0x47/0x50 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 ? kfree+0x14a/0x6b0 ? __usb_get_extra_descriptor+0x116/0x160 usb_new_device.cold+0x49c/0x1029 ? hub_disconnect+0x450/0x450 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_unlock_irq+0x24/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 hub_event+0x248b/0x31c9 ? usb_port_suspend.cold+0x139/0x139 ? check_irq_usage+0x861/0xf20 ? drain_workqueue+0x280/0x360 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x92b/0x1460 ? pwq_dec_nr_in_flight+0x330/0x330 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x95/0xe00 ? __kthread_parkme+0x115/0x1e0 ? process_one_work+0x1460/0x1460 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modulesdd linked in: ---[ end trace c112c68924ddd800 ]--- RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221101183642.166450-1-jisoo.jang@yonsei.ac.kr
2022-11-04wifi: brcmfmac: Fix a typo "unknow"Jonathan Neuschäfer
It should be "unknown". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221101170252.1032085-1-j.neuschaefer@gmx.net
2022-11-04bcma: Use the proper gpio includeLinus Walleij
The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy header <linux/gpio.h> to obtain struct gpio_chip. Instead, include <linux/gpio/driver.h> where this struct is defined. It turns out that the brcm80211 brcmsmac depends on this to bring in the symbol gpio_is_valid(). The driver looks up the BCMA parent GPIO driver and checks that this succeeds, but then it goes on to use the deprecated GPIO call gpio_is_valid() to check the consistency of the .base member of the BCMA GPIO struct. The whole check can be dropped because the bcma_gpio is initialized in the declarations: struct gpio_chip *bcma_gpio = &cc_drv->gpio; And this can never be NULL. Cc: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221028092332.238728-1-linus.walleij@linaro.org
2022-11-04wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()Minsuk Kang
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
2022-11-01wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()Dokyung Song
This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
2022-10-28Kalle Valo says:Jakub Kicinski
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-05brcmfmac: Fix AP interface delete issuePrasanna Kerekoppa
Fixes the ap interface delete issue. Fix is to make sure interface is created with supported version. Patch has been verified by creating and deleting AP interface. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-4-ian.lin@infineon.com
2022-10-05brcmfmac: support station interface creation version 1, 2 and 3Wright Feng
To create virtual station interface for RSDB and VSDB, we add interface creation version 1, 2 and 3 supports The structures of each version are different and only version 3 and later version are able to get interface creating version from firmware side. The patch has been verified two concurrent stations pings test with interface create version 1: 89342(4359b1)-PCIE: 9.40.100 interface create version 2: 4373a0-sdio: 13.10.271 interface create version 3: 4373a0-sdio: 13.35.48 Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-3-ian.lin@infineon.com
2022-10-05brcmfmac: add creating station interface supportWright Feng
With RSDB device, it is able to control two station interfaces concurrently. So we add creating station interface support and allow user to create it via cfg80211. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929050614.31518-2-ian.lin@infineon.com
2022-10-04brcmfmac: dump dongle memory when attaching failedWright Feng
To enhance FW debugging, we add dongle memory dump when hitting attaching failure with PCIE bus. It can help developer to get more information about dongle trap reason and root cause. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-4-ian.lin@infineon.com
2022-10-04brcmfmac: return error when getting invalid max_flowrings from dongleWright Feng
When firmware hit trap at initialization, host will read abnormal max_flowrings number from dongle, and it will cause kernel panic when doing iowrite to initialize dongle ring. To detect this error at early stage, we directly return error when getting invalid max_flowrings(>256). Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-3-ian.lin@infineon.com
2022-10-04brcmfmac: add a timer to read console periodically in PCIE busWright Feng
Currently, host only reads console buffer when receiving mailbox data or hit crash with PCIE bus. Therefore, we add timer in PCIE code to read console buffer periodically to help developer and user check firmware message when there is no data transmission between host and dongle. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929031001.9962-2-ian.lin@infineon.com
2022-10-04brcmfmac: Fix authentication latency caused by OBSS stats surveyRamesh Rangavittal
Auto Channel Select feature of HostAP uses dump_survey to fetch OBSS statistics. When the device is in the middle of an authentication sequence or just at the end of authentication completion, running dump_survey would trigger a channel change. The channel change in-turn can cause packet loss, resulting in authentication delay. With this change, dump_survey won't be run when authentication or association is in progress, hence resolving the issue. Signed-off-by: Ramesh Rangavittal <ramesh.rangavittal@infineon.com> Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-5-ian.lin@infineon.com
2022-10-04brcmfmac: fix CERT-P2P:5.1.10 failureDouble Lo
This patch fix CERT-P2P:5.1.10 failure at step 18 Group formation failed due to chip is under dump survey. Decrease the dump survery duration to pass this certification case. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-4-ian.lin@infineon.com
2022-10-04brcmfmac: fix firmware trap while dumping obss statsWright Feng
When doing dump_survey, host will call "dump_obss" iovar to firmware side. Host need to make sure the HW clock in dongle is on, or there is high probability that firmware gets trap because register or shared memory access failed. To fix this, we disable mpc when doing dump obss and set it back after that. [28350.512799] brcmfmac: brcmf_dump_obss: dump_obss error (-52) [28743.402314] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed [28745.869430] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout [28745.877546] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-3-ian.lin@infineon.com
2022-10-04brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelectionWright Feng
To enable ACS feature in Hostap daemon, dump_survey cfg80211 ops and dump obss survey command in firmware side are needed. This patch is for adding dump_survey feature and adding DUMP_OBSS feature flag to check if firmware supports dump_obss iovar. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220929012527.4152-2-ian.lin@infineon.com
2022-09-27brcmfmac: Remove the call to "dtim_assoc" IOVARRamesh Rangavittal
When STA roams from one AP to another, after roam is complete, host driver tries to get TIM information from firmware. This is no longer supported in the firmware & hence, this call will always fail. This failure results in the below message being displayed on the console all the time when roam is done. ieee80211 phy0: brcmf_update_bss_info: wl dtim_assoc failed (-52) Changes ensure that the host driver will no longer try to get TIM information from firmware. Signed-off-by: Ramesh Rangavittal <ramesh.rangavittal@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-5-ian.lin@infineon.com
2022-09-27brcmfmac: increase dcmd maximum buffer sizeLo(Double)Hsiang Lo
Increase dcmd maximum buffer size to match firmware configuration for new chips. Signed-off-by: Lo(Double)Hsiang Lo <double.lo@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-4-ian.lin@infineon.com
2022-09-27brcmfmac: Support 89459 pcieAlexander Prutskov
Adds support of 89459 chip pcie device and save restore support. Signed-off-by: Alexander Prutskov <alep@cypress.com> Signed-off-by: Joseph chuang <jiac@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-3-ian.lin@infineon.com
2022-09-27brcmfmac: increase default max WOWL patterns to 16Ryohei Kondo
4373 has support of 16 WOWL patterns thus increasing the default value Signed-off-by: Ryohei Kondo <ryohei.kondo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220922104140.11889-2-ian.lin@infineon.com
2022-09-19wifi: brcmfmac: pcie: Add IDs/properties for BCM4378Hector Martin
This chip is present on Apple M1 (t8103) platforms: * atlantisb (apple,j274): Mac mini (M1, 2020) * honshu (apple,j293): MacBook Pro (13-inch, M1, 2020) * shikoku (apple,j313): MacBook Air (M1, 2020) * capri (apple,j456): iMac (24-inch, 4x USB-C, M1, 2020) * santorini (apple,j457): iMac (24-inch, 2x USB-C, M1, 2020) Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDoD-0077ax-AI@rmk-PC.armlinux.org.uk
2022-09-19wifi: brcmfmac: pcie: Support PCIe core revisions >= 64Hector Martin
These newer PCIe core revisions include new sets of registers that must be used instead of the legacy ones. Introduce a brcmf_pcie_reginfo to hold the specific register offsets and values to use for a given platform, and change all the register accesses to indirect through it. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDo8-0077aq-6I@rmk-PC.armlinux.org.uk
2022-09-19wifi: brcmfmac: msgbuf: Increase RX ring sizes to 1024Hector Martin
Newer chips used on Apple platforms have a max_rxbufpost greater than 512, which causes warnings when brcmf_msgbuf_rxbuf_data_fill tries to put more entries in the ring than will fit. Increase the ring sizes to 1024. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDo3-0077ak-2h@rmk-PC.armlinux.org.uk
2022-09-19wifi: brcmfmac: firmware: Allow platform to override macaddrHector Martin
On Device Tree platforms, it is customary to be able to set the MAC address via the Device Tree, as it is often stored in system firmware. This is particularly relevant for Apple ARM64 platforms, where this information comes from system configuration and passed through by the bootloader into the DT. Implement support for this by fetching the platform MAC address and adding or replacing the macaddr= property in nvram. This becomes the dongle's default MAC address. On platforms with an SROM MAC address, this overrides it. On platforms without one, such as Apple ARM64 devices, this is required for the firmware to boot (it will fail if it does not have a valid MAC at all). Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDnx-0077ae-VK@rmk-PC.armlinux.org.uk
2022-09-19wifi: brcmfmac: pcie: Perform firmware selection for Apple platformsHector Martin
On Apple platforms, firmware selection uses the following elements: Property Example Source ============== ======= ======================== * Chip name 4378 Device ID * Chip revision B1 OTP * Platform shikoku DT (ARM64) or ACPI (x86) * Module type RASP OTP * Module vendor m OTP * Module version 6.11 OTP * Antenna SKU X3 DT (ARM64) or ACPI (x86) In macOS, these firmwares are stored using filenames in this format under /usr/share/firmware/wifi: C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt To prepare firmwares for Linux, we rename these to a scheme following the existing brcmfmac convention: brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\ <mod_vendor>-<mod_version>-<antenna_sku>.txt The NVRAM uses all the components, while the firmware and CLM blob only use the chip/revision/platform/antenna_sku: brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin e.g. brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin In addition, since there are over 1000 files in total, many of which are symlinks or outright duplicates, we deduplicate and prune the firmware tree to reduce firmware filenames to fewer dimensions. For example, the shikoku platform (MacBook Air M1 2020) simplifies to just 4 files: brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob brcm/brcmfmac4378b1-pcie.apple,shikoku.bin brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt This reduces the total file count to around 170, of which 75 are symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and 61 NVRAM config files. We also slightly process NVRAM files to correct some formatting issues. To handle this, the driver must try the following path formats when looking for firmware files: brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt * brcm/brcmfmac4378b1-pcie.apple,shikoku.txt * Not relevant for NVRAM, only for firmware/CLM. The chip revision nominally comes from OTP on Apple platforms, but it can be mapped to the PCI revision number, so we ignore the OTP revision and continue to use the existing PCI revision mechanism to identify chip revisions, as the driver already does for other chips. Unfortunately, the mapping is not consistent between different chip types, so this has to be determined experimentally. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDns-0077aY-Qn@rmk-PC.armlinux.org.uk
2022-09-19wifi: brcmfmac: of: Fetch Apple propertiesHector Martin
On Apple ARM64 platforms, firmware selection requires two properties that come from system firmware: the module-instance (aka "island", a codename representing a given hardware platform) and the antenna-sku. We map Apple's module codenames to board_types in the form "apple,<module-instance>". The mapped board_type is added to the DTS file in that form, while the antenna-sku is forwarded by our bootloader from the Apple Device Tree into the FDT. Grab them from the DT so firmware selection can use them. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/E1oZDnn-0077aS-NA@rmk-PC.armlinux.org.uk
generated by cgit (git 2.34.1) at 2025-08-01 20:52:24 +0000