summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2023-03-31wifi: brcmfmac: Fix SDIO suspend/resume regressionHans de Goede
After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card unless WOWL is used"), the wifi adapter by default is turned off on suspend and then re-probed on resume. In at least 2 model x86/acpi tablets with brcmfmac43430a1 wifi adapters, the newly added re-probe on resume fails like this: brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout ieee80211 phy1: brcmf_bus_started: failed: -110 ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110 brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed It seems this specific brcmfmac model does not like being reprobed without it actually being turned off first. And the adapter is not being turned off during suspend because of commit f0992ace680c ("brcmfmac: prohibit ACPI power management for brcmfmac driver"). Now that the driver is being reprobed on resume, the disabling of ACPI pm is no longer necessary, except when WOWL is used (in which case there is no-reprobe). Move the dis-/en-abling of ACPI pm to brcmf_sdio_wowl_config(), this fixes the brcmfmac43430a1 suspend/resume regression and should help save some power when suspended. This change means that the code now also may re-enable ACPI pm when WOWL gets disabled. ACPI pm should only be re-enabled if it was enabled by the ACPI core originally. Add a brcmf_sdiod_acpi_save_power_manageable() to save the original state for this. This has been tested on the following devices: Asus T100TA brcmfmac43241b4-sdio Acer Iconia One 7 B1-750 brcmfmac43340-sdio Chuwi Hi8 brcmfmac43430a0-sdio Chuwi Hi8 brcmfmac43430a1-sdio (the Asus T100TA is the device for which the prohibiting of ACPI pm was originally added) Fixes: 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card unless WOWL is used") Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320122252.240070-1-hdegoede@redhat.com
2023-02-16wifi: brcmfmac: p2p: Introduce generic flexible array frame memberKees Cook
Silence run-time memcpy() false positive warning when processing management frames: memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26) Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via __builtin_dynamic_object_size) doesn't recognize that the union may end with a flexible array, and returns "26" (the fixed size of the union), rather than the remaining size of the allocation. Add an explicit flexible array member and set it as the destination here, so that we get the correct coverage for the memcpy(). [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832 Reported-by: Ard Biesheuvel <ardb@kernel.org> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Brian Henriquez <brian.henriquez@cypress.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: SHA-cyfmac-dev-list@infineon.com Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org [rename 'frame' to 'body'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-13wifi: brcmfmac: change cfg80211_set_channel() name and signatureArend van Spriel
The function cfg80211_set_channel() is an static function in brcmfmac but the name is misleading. Hence rename it with 'brcmf' prefix. Also changing the parameters to avoid additional conversions. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-4-arend.vanspriel@broadcom.com
2023-02-13wifi: brcmfmac: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_tlv. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/253 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y9xjizhMujNEtpB4@work
2023-02-13wifi: brcmfmac: pcie: Perform correct BCM4364 firmware selectionHector Martin
This chip exists in two revisions (B2=r3 and B3=r4) on different platforms, and was added without regard to doing proper firmware selection or differentiating between them. Fix this to have proper per-revision firmwares and support Apple NVRAM selection. Revision B2 is present on at least these Apple T2 Macs: kauai: MacBook Pro 15" (Touch/2018-2019) maui: MacBook Pro 13" (Touch/2018-2019) lanai: Mac mini (Late 2018) ekans: iMac Pro 27" (5K, Late 2017) And these non-T2 Macs: nihau: iMac 27" (5K, 2019) Revision B3 is present on at least these Apple T2 Macs: bali: MacBook Pro 16" (2019) trinidad: MacBook Pro 13" (2020, 4 TB3) borneo: MacBook Pro 16" (2019, 5600M) kahana: Mac Pro (2019) kahana: Mac Pro (2019, Rack) hanauma: iMac 27" (5K, 2020) kure: iMac 27" (5K, 2020, 5700/XT) Also fix the firmware interface for 4364, from BCA to WCC. Fixes: 24f0bd136264 ("brcmfmac: add the BRCM 4364 found in MacBook Pro 15,2") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-5-marcan@marcan.st
2023-02-13wifi: brcmfmac: pcie: Add IDs/properties for BCM4377Hector Martin
This chip is present on at least these Apple T2 Macs: * tahiti: MacBook Pro 13" (2020, 2 TB3) * formosa: MacBook Pro 13" (Touch/2019) * fiji: MacBook Air 13" (Scissor, 2020) Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-4-marcan@marcan.st
2023-02-13wifi: brcmfmac: pcie: Add IDs/properties for BCM4355Hector Martin
This chip is present on at least these Apple T2 Macs: * hawaii: MacBook Air 13" (Late 2018) * hawaii: MacBook Air 13" (True Tone, 2019) Users report seeing PCI revision ID 12 for this chip, which Arend reports should be revision C2, but Apple has the firmware tagged as revision C1. Assume the right cutoff point for firmware versions is revision ID 11 then, and leave older revisions using the non-versioned firmware filename (Apple only uses C1 firmware builds). Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-3-marcan@marcan.st
2023-02-13wifi: brcmfmac: Rename Cypress 89459 to BCM4355Hector Martin
The commit that introduced support for this chip incorrectly claimed it is a Cypress-specific part, while in actuality it is just a variant of BCM4355 silicon (as evidenced by the chip ID). The relationship between Cypress products and Broadcom products isn't entirely clear but given what little information is available and prior art in the driver, it seems the convention should be that originally Broadcom parts should retain the Broadcom name. Thus, rename the relevant constants and firmware file. Also rename the specific 89459 PCIe ID to BCM43596, which seems to be the original subvariant name for this PCI ID (as defined in the out-of-tree bcmdhd driver). Since Cypress added this part and will presumably be providing its supported firmware, we keep the CYW designation for this device. We also drop the RAW device ID in this commit. We don't do this for the other chips since apparently some devices with them exist in the wild, but there is already a 4355 entry with the Broadcom subvendor and WCC firmware vendor, so adding a generic fallback to Cypress seems redundant (no reason why a device would have the raw device ID *and* an explicitly programmed subvendor). Fixes: dce45ded7619 ("brcmfmac: Support 89459 pcie") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-2-marcan@marcan.st
2023-01-17Merge wireless into wireless-nextKalle Valo
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless-next. 96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
2023-01-16wifi: brcmfmac: ensure CLM version is null-terminated to prevent ↵Jisoo Jang
stack-out-of-bounds Fix a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with a CLM version string by memcpy() in brcmf_fil_iovar_data_get(). Ensure buf is null-terminated. Found by a modified version of syzkaller. [ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22 [ 33.021554][ T1896] ================================================================== [ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110 [ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896 [ 33.023852][ T1896] [ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 [ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event [ 33.026581][ T1896] Call Trace: [ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d [ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334 [ 33.028037][ T1896] ? strreplace+0xf2/0x110 [ 33.028403][ T1896] ? strreplace+0xf2/0x110 [ 33.028807][ T1896] kasan_report.cold+0x83/0xdf [ 33.029283][ T1896] ? strreplace+0xf2/0x110 [ 33.029666][ T1896] strreplace+0xf2/0x110 [ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40 [ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0 [ 33.032091][ T1896] ? find_held_lock+0x2d/0x110 [ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260 [ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 33.033582][ T1896] brcmf_attach+0x246/0xd40 [ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50 [ 33.034383][ T1896] ? kmemdup+0x30/0x40 [ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690 [ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 33.035833][ T1896] usb_probe_interface+0x25f/0x710 [ 33.036315][ T1896] really_probe+0x1be/0xa90 [ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0 [ 33.037383][ T1896] driver_probe_device+0x49/0x120 [ 33.037790][ T1896] __device_attach_driver+0x18a/0x250 [ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.042330][ T1896] __device_attach+0x207/0x330 [ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.043515][ T1896] bus_probe_device+0x1a2/0x260 [ 33.043914][ T1896] device_add+0xa61/0x1ce0 [ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660 [ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.045531][ T1896] usb_set_configuration+0x984/0x1770 [ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230 [ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90 [ 33.046931][ T1896] usb_probe_device+0x9c/0x220 [ 33.047434][ T1896] really_probe+0x1be/0xa90 [ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.048134][ T1896] driver_probe_device+0x49/0x120 [ 33.048516][ T1896] __device_attach_driver+0x18a/0x250 [ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.049437][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.049814][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.050164][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.050579][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.050936][ T1896] __device_attach+0x207/0x330 [ 33.051399][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.051888][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.052314][ T1896] bus_probe_device+0x1a2/0x260 [ 33.052688][ T1896] device_add+0xa61/0x1ce0 [ 33.053121][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.053568][ T1896] usb_new_device.cold+0x463/0xf66 [ 33.053953][ T1896] ? hub_disconnect+0x400/0x400 [ 33.054313][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.054661][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.055094][ T1896] hub_event+0x10d5/0x3330 [ 33.055530][ T1896] ? hub_port_debounce+0x280/0x280 [ 33.055934][ T1896] ? __lock_acquire+0x1671/0x5790 [ 33.056387][ T1896] ? wq_calc_node_cpumask+0x170/0x2a0 [ 33.056924][ T1896] ? lock_release+0x640/0x640 [ 33.057383][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.057916][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.058402][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.059019][ T1896] process_one_work+0x873/0x13e0 [ 33.059488][ T1896] ? lock_release+0x640/0x640 [ 33.059932][ T1896] ? pwq_dec_nr_in_flight+0x320/0x320 [ 33.060446][ T1896] ? rwlock_bug.part.0+0x90/0x90 [ 33.060898][ T1896] worker_thread+0x8b/0xd10 [ 33.061348][ T1896] ? __kthread_parkme+0xd9/0x1d0 [ 33.061810][ T1896] ? process_one_work+0x13e0/0x13e0 [ 33.062288][ T1896] kthread+0x379/0x450 [ 33.062660][ T1896] ? _raw_spin_unlock_irq+0x24/0x30 [ 33.063148][ T1896] ? set_kthread_struct+0x100/0x100 [ 33.063606][ T1896] ret_from_fork+0x1f/0x30 [ 33.064070][ T1896] [ 33.064313][ T1896] [ 33.064545][ T1896] addr ffffc90001d6efc8 is located in stack of task kworker/0:2/1896 at offset 512 in frame: [ 33.065478][ T1896] brcmf_c_preinit_dcmds+0x0/0xc40 [ 33.065973][ T1896] [ 33.066191][ T1896] this frame has 4 objects: [ 33.066614][ T1896] [48, 56) 'ptr' [ 33.066618][ T1896] [80, 148) 'revinfo' [ 33.066957][ T1896] [192, 210) 'eventmask' [ 33.067338][ T1896] [256, 512) 'buf' [ 33.067742][ T1896] [ 33.068304][ T1896] Memory state around the buggy address: [ 33.068838][ T1896] ffffc90001d6ee80: f2 00 00 02 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 33.069545][ T1896] ffffc90001d6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.070626][ T1896] >ffffc90001d6ef80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 33.072052][ T1896] ^ [ 33.073043][ T1896] ffffc90001d6f000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074230][ T1896] ffffc90001d6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.074914][ T1896] ================================================================== [ 33.075713][ T1896] Disabling lock debugging due to kernel taint Reviewed-by: Arend van Spriel<arend.vanspriel@broadcom.com> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221230075139.56591-1-jisoo.jang@yonsei.ac.kr
2023-01-16wifi: brcmfmac: fix regression for Broadcom PCIe wifi devicesArend van Spriel
A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only deviceArend van Spriel
When dealing with a device for 2GHz band only the wiphy->bands for 5GHz will be NULL. This would result in a NULL-deref in the brcmf_cfg80211_dump_survey() function. Rework the code with a for-loop to make it easier to add another band. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-3-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid handling disabled channels for survey dumpArend van Spriel
An issue was reported in which periodically error messages are printed in the kernel log: [ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2 [ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing [ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 27.076829] Bluetooth: hci0: BCM: features 0x2f [ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ [ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 [ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 30.590017] Bluetooth: MGMT ver 1.22 [ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52 [ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52 [ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52 [ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52 [ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52 [ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52 [ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52 [ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52 [ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52 [ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52 This happens in brcmf_cfg80211_dump_survey() because we try a disabled channel. When channel is marked as disabled we do not need to fill any other info so bail out. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-2-arend.vanspriel@broadcom.com
2023-01-09brcmfmac: Prefer DT board type over DMI board typeIvan T. Ivanov
The introduction of support for Apple board types inadvertently changed the precedence order, causing hybrid SMBIOS+DT platforms to look up the firmware using the DMI information instead of the device tree compatible to generate the board type. Revert back to the old behavior, as affected platforms use firmwares named after the DT compatible. Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties") [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13 Cc: stable@vger.kernel.org Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-22wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()Zhengchao Shao
After the DMA buffer is mapped to a physical address, address is stored in pktids in brcmf_msgbuf_alloc_pktid(). Then, pktids is parsed in brcmf_msgbuf_get_pktid()/brcmf_msgbuf_release_array() to obtain physaddr and later unmap the DMA buffer. But when count is always equal to pktids->array_size, physaddr isn't stored in pktids and the DMA buffer will not be unmapped anyway. Fixes: 9a1bb60250d2 ("brcmfmac: Adding msgbuf protocol.") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221207013114.1748936-1-shaozhengchao@huawei.com
2022-12-22wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()Zhang Changzhong
The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it. Compile tested only. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1668684782-47422-1-git-send-email-zhangchangzhong@huawei.com
2022-12-22wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()Jisoo Jang
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware version string by memcpy() in brcmf_fil_iovar_data_get(). The patch ensures buf is null-terminated. Found by a modified version of syzkaller. [ 47.569679][ T1897] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43236b for chip BCM43236/3 [ 47.582839][ T1897] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 47.601565][ T1897] ================================================================== [ 47.602574][ T1897] BUG: KASAN: stack-out-of-bounds in strsep+0x1b2/0x1f0 [ 47.603447][ T1897] Read of size 1 at addr ffffc90001f6f000 by task kworker/0:2/1897 [ 47.604336][ T1897] [ 47.604621][ T1897] CPU: 0 PID: 1897 Comm: kworker/0:2 Tainted: G O 5.14.0+ #131 [ 47.605617][ T1897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 47.606907][ T1897] Workqueue: usb_hub_wq hub_event [ 47.607453][ T1897] Call Trace: [ 47.607801][ T1897] dump_stack_lvl+0x8e/0xd1 [ 47.608295][ T1897] print_address_description.constprop.0.cold+0xf/0x334 [ 47.609009][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609434][ T1897] ? strsep+0x1b2/0x1f0 [ 47.609863][ T1897] kasan_report.cold+0x83/0xdf [ 47.610366][ T1897] ? strsep+0x1b2/0x1f0 [ 47.610882][ T1897] strsep+0x1b2/0x1f0 [ 47.611300][ T1897] ? brcmf_fil_iovar_data_get+0x3a/0xf0 [ 47.611883][ T1897] brcmf_c_preinit_dcmds+0x995/0xc40 [ 47.612434][ T1897] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 47.613078][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.613662][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.614208][ T1897] ? lock_acquire+0x19d/0x4e0 [ 47.614704][ T1897] ? find_held_lock+0x2d/0x110 [ 47.615236][ T1897] ? brcmf_usb_deq+0x1a7/0x260 [ 47.615741][ T1897] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 47.616288][ T1897] brcmf_attach+0x246/0xd40 [ 47.616758][ T1897] ? wiphy_new_nm+0x1703/0x1dd0 [ 47.617280][ T1897] ? kmemdup+0x43/0x50 [ 47.617720][ T1897] brcmf_usb_probe+0x12de/0x1690 [ 47.618244][ T1897] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 47.618901][ T1897] usb_probe_interface+0x2aa/0x760 [ 47.619429][ T1897] ? usb_probe_device+0x250/0x250 [ 47.619950][ T1897] really_probe+0x205/0xb70 [ 47.620435][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.621048][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.621595][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.622209][ T1897] driver_probe_device+0x4e/0x150 [ 47.622739][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.623287][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.623796][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.624309][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.624907][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.625437][ T1897] __device_attach+0x23f/0x3a0 [ 47.625924][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.626433][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.627057][ T1897] bus_probe_device+0x1da/0x290 [ 47.627557][ T1897] device_add+0xb7b/0x1eb0 [ 47.628027][ T1897] ? wait_for_completion+0x290/0x290 [ 47.628593][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.629249][ T1897] usb_set_configuration+0xf59/0x16f0 [ 47.629829][ T1897] usb_generic_driver_probe+0x82/0xa0 [ 47.630385][ T1897] usb_probe_device+0xbb/0x250 [ 47.630927][ T1897] ? usb_suspend+0x590/0x590 [ 47.631397][ T1897] really_probe+0x205/0xb70 [ 47.631855][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.632469][ T1897] __driver_probe_device+0x311/0x4b0 [ 47.633002][ T1897] ? usb_generic_driver_match+0x75/0x90 [ 47.633573][ T1897] ? driver_allows_async_probing+0x130/0x130 [ 47.634170][ T1897] driver_probe_device+0x4e/0x150 [ 47.634703][ T1897] __device_attach_driver+0x1cc/0x2a0 [ 47.635248][ T1897] bus_for_each_drv+0x156/0x1d0 [ 47.635748][ T1897] ? bus_rescan_devices+0x30/0x30 [ 47.636271][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.636881][ T1897] ? trace_hardirqs_on+0x46/0x160 [ 47.637396][ T1897] __device_attach+0x23f/0x3a0 [ 47.637904][ T1897] ? device_bind_driver+0xd0/0xd0 [ 47.638426][ T1897] ? kobject_uevent_env+0x287/0x14b0 [ 47.638985][ T1897] bus_probe_device+0x1da/0x290 [ 47.639512][ T1897] device_add+0xb7b/0x1eb0 [ 47.639977][ T1897] ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 [ 47.640612][ T1897] ? kfree+0x14a/0x6b0 [ 47.641055][ T1897] ? __usb_get_extra_descriptor+0x116/0x160 [ 47.641679][ T1897] usb_new_device.cold+0x49c/0x1029 [ 47.642245][ T1897] ? hub_disconnect+0x450/0x450 [ 47.642756][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.643273][ T1897] ? _raw_spin_unlock_irq+0x24/0x30 [ 47.643822][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.644445][ T1897] hub_event+0x1c98/0x3950 [ 47.644939][ T1897] ? hub_port_debounce+0x2e0/0x2e0 [ 47.645467][ T1897] ? check_irq_usage+0x861/0xf20 [ 47.645975][ T1897] ? drain_workqueue+0x280/0x360 [ 47.646506][ T1897] ? lock_release+0x640/0x640 [ 47.646994][ T1897] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 47.647572][ T1897] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 47.648111][ T1897] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 47.648735][ T1897] process_one_work+0x92b/0x1460 [ 47.649262][ T1897] ? pwq_dec_nr_in_flight+0x330/0x330 [ 47.649816][ T1897] ? rwlock_bug.part.0+0x90/0x90 [ 47.650336][ T1897] worker_thread+0x95/0xe00 [ 47.650830][ T1897] ? __kthread_parkme+0x115/0x1e0 [ 47.651361][ T1897] ? process_one_work+0x1460/0x1460 [ 47.651904][ T1897] kthread+0x3a1/0x480 [ 47.652329][ T1897] ? set_kthread_struct+0x120/0x120 [ 47.652878][ T1897] ret_from_fork+0x1f/0x30 [ 47.653370][ T1897] [ 47.653608][ T1897] [ 47.653848][ T1897] addr ffffc90001f6f000 is located in stack of task kworker/0:2/1897 at offset 512 in frame: [ 47.654891][ T1897] brcmf_c_preinit_dcmds+0x0/0xc40 [ 47.655442][ T1897] [ 47.655690][ T1897] this frame has 4 objects: [ 47.656151][ T1897] [48, 56) 'ptr' [ 47.656159][ T1897] [80, 148) 'revinfo' [ 47.656534][ T1897] [192, 210) 'eventmask' [ 47.656953][ T1897] [256, 512) 'buf' [ 47.657410][ T1897] [ 47.658035][ T1897] Memory state around the buggy address: [ 47.658743][ T1897] ffffc90001f6ef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.659577][ T1897] ffffc90001f6ef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.660394][ T1897] >ffffc90001f6f000: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 47.661199][ T1897] ^ [ 47.661625][ T1897] ffffc90001f6f080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 47.662455][ T1897] ffffc90001f6f100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 [ 47.663318][ T1897] ================================================================== [ 47.664147][ T1897] Disabling lock debugging due to kernel taint Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-08wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()Wang Yufen
Fix to return a negative error code instead of 0 when brcmf_chip_set_active() fails. In addition, change the return value for brcmf_pcie_exit_download_state() to keep consistent. Fixes: d380ebc9b6fb ("brcmfmac: rename chip download functions") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1669959342-27144-1-git-send-email-wangyufen@huawei.com
2022-12-08wifi: brcmfmac: introduce BRCMFMAC exported symbols namespaceArend van Spriel
Using a namespace variant to make clear it is only intended to be used by the vendor-specific modules. The symbol will only truly export the symbols when the driver and consequently the vendor-specific part are built as kernel modules. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-8-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add vendor name in revinfo debugfs fileArend van Spriel
Upon probe the driver determines the vendor supporting the device. Expose this information in the revinfo debugfs file. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-7-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support Broadcom BCA firmware apiArend van Spriel
Broadcom BCA division develops its own firmware api and as such will likely diverge over time (or already has). Add support for handling this. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-6-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support for Cypress firmware apiArend van Spriel
Cypress uses the brcmfmac driver and releases firmware which will likely diverge over time (or already has). So adding support for handling that. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-5-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add support for vendor-specific firmware apiArend van Spriel
The driver is being used by multiple vendors who develop the firmware api independently. So far the firmware api as used by the driver has not diverged (yet). This change adds framework for supporting multiple firmware apis. The vendor-specific support code has to provide a number of callback operations. Right now it is only attach and detach callbacks so no real functionality as the api is still common. This code only adds WCC variant anyway, which is selected for all devices right now. The vendor-specific part will be built in a separate module when the driver is configured to be built as a module through Kconfig, ie. when CONFIG_BRCMFMAC=m. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-4-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add firmware vendor info in driver infoArend van Spriel
In order to determine the vendor that released a firmware image for a specific device, the device table now sets the vendor identifier in driver info and it is stored in struct brcmf_bus::fwvid during probe. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-3-arend.vanspriel@broadcom.com
2022-12-08wifi: brcmfmac: add function to unbind device to bus layer apiArend van Spriel
Introduce a new bus callback .remove() which will unbind the device from the driver. This allows the common driver layer to stop handling a device. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221129135446.151065-2-arend.vanspriel@broadcom.com
2022-12-01wifi: brcmfmac: Check the count value of channel spec to prevent ↵Minsuk Kang
out-of-bounds reads This patch fixes slab-out-of-bounds reads in brcmfmac that occur in brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count value of channel specifications provided by the device is greater than the length of 'list->element[]', decided by the size of the 'list' allocated with kzalloc(). The patch adds checks that make the functions free the buffer and return -EINVAL if that is the case. Note that the negative return is handled by the caller, brcmf_setup_wiphybands() or brcmf_cfg80211_attach(). Found by a modified version of syzkaller. Crash Report from brcmf_construct_chaninfo(): ================================================================== BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430 Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896 CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0.cold+0x93/0x334 kasan_report.cold+0x83/0xdf brcmf_setup_wiphybands+0x1238/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 Allocated by task 1896: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 kmem_cache_alloc_trace+0x19e/0x330 brcmf_setup_wiphybands+0x290/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888115f24000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1536 bytes inside of 2048-byte region [ffff888115f24000, ffff888115f24800) Memory state around the buggy address: ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Crash Report from brcmf_enable_bw40_2g(): ================================================================== BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0 Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896 CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0.cold+0x93/0x334 kasan_report.cold+0x83/0xdf brcmf_cfg80211_attach+0x3d11/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 Allocated by task 1896: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 kmem_cache_alloc_trace+0x19e/0x330 brcmf_cfg80211_attach+0x3302/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888103787000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1536 bytes inside of 2048-byte region [ffff888103787000, ffff888103787800) Memory state around the buggy address: ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
2022-11-28wifi: b43: remove reference to removed config B43_PCMCIALukas Bulwahn
Commit 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver") removes the config B43_PCMCIA. Clean up the last reference to this removed config B43_PCMCIA in the b43_print_driverinfo() function. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221122131248.23738-1-lukas.bulwahn@gmail.com
2022-11-22wifi: brcmfmac: Use struct_size() in code ralated to struct brcmf_dload_data_leGustavo A. R. Silva
Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count where count is the max number of items the flexible array is supposed to contain. In this particular case, in the open-coded version sizeof(typeof-flex-array-elements) is implicit in _count_ because the type of the flex array data is u8: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h:941: 941 struct brcmf_dload_data_le { 942 __le16 flag; 943 __le16 dload_type; 944 __le32 len; 945 __le32 crc; 946 u8 data[]; 947 }; Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/41845ad3660ed4375f0c03fd36a67b2e12fafed5.1668548907.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: replace one-element array with flexible-array member in ↵Gustavo A. R. Silva
struct brcmf_dload_data_le One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_dload_data_le. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/230 Link: https://github.com/KSPP/linux/issues/79 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/905f5b68cf93c812360d081caae5b15221db09b6.1668548907.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: Use struct_size() and array_size() in code ralated to struct ↵Gustavo A. R. Silva
brcmf_gscan_config Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count where count is the max number of items the flexible array is supposed to contain. Also, use array_size() in call to memcpy(). Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/de0226a549c8d000d8974e207ede786220a3df1a.1668466470.git.gustavoars@kernel.org
2022-11-22wifi: brcmfmac: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_gscan_config. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/241 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/7694550aa9a2753a73a687f61af9441c8cf52fd7.1668466470.git.gustavoars@kernel.org
2022-11-18Merge tag 'wireless-next-2022-11-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08wifi: brcmfmac: Avoiding Connection delayPrasanna Kerekoppa
Channel info passed by supplicant is not given to firmware. This causes delay (about 3seconds) due to full scan. Supplicant already provides the channel info for the specific SSID. channel_hint carries this channel info for the connect call back. Patch has been verified on 43012 and 43455. Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-4-ian.lin@infineon.com
2022-11-08wifi: brcmfmac: Fix for when connect request is not successWataru Gohda
Currently brcmfmac is expecting to be set for both BRCMF_VIF_STATUS_EAP_SUCCESS and BRCMF_VIF_STATUS_EAP status bit based on dongle event and those bits are cleared to complete connect request successfully. But when connect request is finished unsuccessfully, either BRCMF_VIF_STATUS_EAP_SUCCESS / BRCMF_VIF_STATUS_EAP bits are not cleared depending on how the connect fail event happens. These status bits are carried over to following new connect request and this will lead to generate below kernel warning for some case. Worst case status mismatch happens between dongle and wpa_supplicant. WARNING: ../net/wireless/sme.c:756 __cfg80211_connect_result+0x42c/0x4a0 [cfg80211] The fix is to clear the BRCMF_VIF_STATUS_EAP_SUCCESS / BRCMF_VIF_STATUS_EAP bits during the link down process and add to call link down process when link down event received during BRCMF_VIF_STATUS_CONNECTING as well as BRCMF_VIF_STATUS_CONNECTED state. Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-3-ian.lin@infineon.com
2022-11-08wifi: brcmfmac: correctly remove all p2p vifBrian Henriquez
When deleting a P2P AGO interface we should make sure that relevant entry in bss_idx[] array is removed. We were always removing only 'vif' at P2PAPI_BSSCFG_CONNECTION before, regardless of the number of created P2P AGO interfaces. brcmfmac: correctly remove all p2p vif Signed-off-by: Brian Henriquez <brian.henriquez@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024085215.27616-2-ian.lin@infineon.com
2022-11-04wifi: brcmfmac: Fix potential NULL pointer dereference in ↵Jisoo Jang
'brcmf_c_preinit_dcmds()' This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when ptr which is NULL pointer passed as an argument of strlcpy() in brcmf_c_preinit_dcmds(). This happens when the driver passes a firmware version string that does not contain a space " ", making strrchr() return a null pointer. This patch adds a null pointer check. Found by a modified version of syzkaller. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 1983 Comm: kworker/0:2 Not tainted 5.14.0+ #79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: brcmf_c_preinit_dcmds+0x9f2/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1703/0x1dd0 ? kmemdup+0x43/0x50 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x2aa/0x760 ? usb_probe_device+0x250/0x250 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x46/0x160 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? wait_for_completion+0x290/0x290 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 usb_set_configuration+0xf59/0x16f0 usb_generic_driver_probe+0x82/0xa0 usb_probe_device+0xbb/0x250 ? usb_suspend+0x590/0x590 really_probe+0x205/0xb70 ? driver_allows_async_probing+0x130/0x130 __driver_probe_device+0x311/0x4b0 ? usb_generic_driver_match+0x75/0x90 ? driver_allows_async_probing+0x130/0x130 driver_probe_device+0x4e/0x150 __device_attach_driver+0x1cc/0x2a0 bus_for_each_drv+0x156/0x1d0 ? bus_rescan_devices+0x30/0x30 ? _raw_spin_unlock_irqrestore+0x47/0x50 __device_attach+0x23f/0x3a0 ? device_bind_driver+0xd0/0xd0 ? kobject_uevent_env+0x287/0x14b0 bus_probe_device+0x1da/0x290 device_add+0xb7b/0x1eb0 ? __fw_devlink_link_to_suppliers+0x5a0/0x5a0 ? kfree+0x14a/0x6b0 ? __usb_get_extra_descriptor+0x116/0x160 usb_new_device.cold+0x49c/0x1029 ? hub_disconnect+0x450/0x450 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_unlock_irq+0x24/0x30 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 hub_event+0x248b/0x31c9 ? usb_port_suspend.cold+0x139/0x139 ? check_irq_usage+0x861/0xf20 ? drain_workqueue+0x280/0x360 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x92b/0x1460 ? pwq_dec_nr_in_flight+0x330/0x330 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x95/0xe00 ? __kthread_parkme+0x115/0x1e0 ? process_one_work+0x1460/0x1460 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modulesdd linked in: ---[ end trace c112c68924ddd800 ]--- RIP: 0010:strlen+0x1a/0x90 Code: 23 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 48 b8 00 00 00 00 00 fc ff df 48 89 fa 55 48 89 fd 48 c1 ea 03 53 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 04 84 c0 75 48 80 7d 00 00 RSP: 0018:ffffc90002bfedd8 EFLAGS: 00010296 RAX: dffffc0000000000 RBX: 1ffff9200057fdc1 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000039 R09: ffffed1023549801 R10: ffff88811aa4c007 R11: ffffed1023549800 R12: ffff88800bc68d6c R13: ffffc90002bfef08 R14: ffff88800bc6bc7c R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020546180 CR3: 0000000117ff1000 CR4: 0000000000750ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221101183642.166450-1-jisoo.jang@yonsei.ac.kr
2022-11-04wifi: brcmfmac: Fix a typo "unknow"Jonathan Neuschäfer
It should be "unknown". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221101170252.1032085-1-j.neuschaefer@gmx.net
2022-11-04bcma: Use the proper gpio includeLinus Walleij
The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy header <linux/gpio.h> to obtain struct gpio_chip. Instead, include <linux/gpio/driver.h> where this struct is defined. It turns out that the brcm80211 brcmsmac depends on this to bring in the symbol gpio_is_valid(). The driver looks up the BCMA parent GPIO driver and checks that this succeeds, but then it goes on to use the deprecated GPIO call gpio_is_valid() to check the consistency of the .base member of the BCMA GPIO struct. The whole check can be dropped because the bcma_gpio is initialized in the declarations: struct gpio_chip *bcma_gpio = &cc_drv->gpio; And this can never be NULL. Cc: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221028092332.238728-1-linus.walleij@linaro.org
2022-11-04wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()Minsuk Kang
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
2022-11-01wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()Dokyung Song
This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
2022-10-28Kalle Valo says:Jakub Kicinski
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-04-28 17:53:07 +0000