summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/fw
AgeCommit message (Collapse)Author
2019-11-20iwlwifi: scan: support scan req FW API ver 13Tova Mussai
1. Modify channel config flags to be used for legacy bands channels as well, to indicate SSIDs elements from ssidIEsArray. 2. Add new general flag. 3. Remove ssidNum from probe params. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30iwlwifi: fw api: support new API for scan config cmdAyala Beker
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: rx: use new api to get band from rx mpduTova Mussai
The FW introduce new API to get the band from the rx mpdu, use this new API. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use vzalloc to allocate dumping memory regionsShahar S Matityahu
During dump flow, the driver allocates spaces to store the memory regions that will be included in the dump. These regions can be very large so in order to avoid allocation failure, use vzalloc instead. The kmalloc uses GFP_KERNEL and the driver does not make any use of the fact that the memory is contiguous so the same functionality is maintained. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: add notification for missed VAPLior Cohen
A missed VAP notification will be sent from umac when the station is out of sync with its associated non-transmitted BSSID. The notification will be sent only if the transmitted BSSID is an EMA-AP one. The driver will consider this notification as connection loss. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: use the new session protection commandEmmanuel Grumbach
The firmware has now a new session protection command. This new API allows the firmware to manage the protection needed for association. It'll also remove the event when the association is complete. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: add support for new version for D0I3_END_CMDHaim Dreyfuss
During D3 state there are some flows which requires FW reset. Add new API to support it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: remove old API and some related codeShahar S Matityahu
Remove unused code of the old debug ini API. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support FW response/notification region typeShahar S Matityahu
Allow the driver to collect FW response/notification region type during dump and allow triggering dump collection for a given FW response/notification. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support domain changing via debugfsShahar S Matityahu
Allow to change or read the debug domain bitmap at runtime via fw_dbg_domain debugfs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: implement time point handlingShahar S Matityahu
Calculate active triggers list and implement time points handling. Also allow to override the debug domain via iwl-dbg-cfg.ini by setting FW_DBG_DOMAIN field. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add TLV allocation new API supportShahar S Matityahu
Add new debug TLVs API preprocessing. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use new API in dump infoShahar S Matityahu
Make dump info region use new API. debug_info_tlv_list list will be initialize in a future patch once the driver will start using it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add error tables dumping supportShahar S Matityahu
Allow to collect error table data. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add monitor dumping supportShahar S Matityahu
Allow collecting monitor data in ini debug mode. Implement both SMEM and DRAM monitor regions dumping. For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several DRAM fragments per DBGC. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use new trigger TLV in dump flowShahar S Matityahu
Make dump flow use the new trigger TLV. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use new region TLV in dump flowShahar S Matityahu
Make dump flow use the new region TLV and update the region type enum. Temporarily remove monitor dumping support. Support will be readded in a future patch. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: dbg_ini: fix memory leak in alloc_sgtableNavid Emamdoost
In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: fix ACPI table revision checksLuca Coelho
We can't check for the ACPI table revision validity in the same if where we check if the package was read correctly, because we return PTR_ERR(pkg) and if the table is not valid but the pointer is, we would return a valid pointer as an error. Fix that by moving the table checks to a separate if and return -EINVAL if it's not valid. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: remove iwl_fw_cancel_dumps functionShahar S Matityahu
Use cancel_delayed_work_sync on the dump workers only in case of unloading the op mode. In any other case use iwl_fw_flush_dumps or iwl_fw_dbg_stop_sync (depends if the op mode mutex is held or not). This way, the driver will wait until debug data is collected in all cases but op mode unloading. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: remove periodic triggerShahar S Matityahu
Remove periodic trigger functionality. After moving to the new API we will add periodic trigger functionality that matches the new API. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: fix dump structs docShahar S Matityahu
Fix the documentation of struct iwl_fw_ini_monitor_dump and iwl_fw_ini_error_dump_range. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: fw api: add DRAM buffer allocation commandShahar S Matityahu
Add support code to be able to use the DRAM buffer allocation command, which allows us to send information about a buffer to the firmware to use it with the DBGC hardware. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: remove apply point, switch to time point APIShahar S Matityahu
Remove the "apply points" mechanism as preparation for the changed debug API where this is now a "time point" instead. Use a new API across the code at the trigger points ("time points"), but don't yet implement it since that requires some more preparation. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add iwl_tlv_array_len()Shahar S Matityahu
Allows to easily calculate array length at the end of a TLV. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: add support for single antenna diversityHaim Dreyfuss
There are products which have a single chain with 2 antennas. In these products, we need to inform the FW that the device has the single antenna diversity(SAD) feature. In the future, we will read the active antenna from a BIOS configuration. Currently, we use a default configuration which means that the FW decides which antenna to use. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: handle BAR_FRAME_RELEASE (0xc2) notificationJohannes Berg
In prior hardware generations (e.g. 9000 series), we received the BAR frame with fake NSSN information to handle releasing frames from the reorder buffer for the default queue, the other queues were getting the FRAME_RELEASE notification in this case. With multi-TID block-ack, the firmware no longer sends us the BAR frame because the fake RX is quite big (just the metadata is around 48 bytes or so). Instead, it now sends us one (or multiple) special release notifications (0xc2). The hardware consumes these as well, but only generates the FRAME_RELEASE (0xc3) for queues other than the default queue. We thus need to handle them in the same way we handle the normal FRAME_RELEASE. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add sta_id to WOWLAN_CONFIG_CMDHaim Dreyfuss
WoWlan feature within the FW uses the station id for various of reasons. Thus we need to add this information to the command. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add a pointer to the trans_cfg directly in transLuca Coelho
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: use regions ops array instead of switch case in dump flowShahar S Matityahu
Make a static regions ops array and use it instead of switch case when determining what op to use to collect a region. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: make a single ops struct for paging collectShahar S Matityahu
Needed for future changes. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: move tx fifo data into fw runtimeShahar S Matityahu
Needed for future changes. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: use linked list for dump TLVs during dump creationShahar S Matityahu
Avoid iterating over dump TLVs twice for size calculation by using linked list to store the dump TLVs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: separate cfg and dump flows to different modulesShahar S Matityahu
separate configuration flows and dump collection flows. make ini configuration flows be in iwl-dbg-tlv.c and dump related flows in dbg.c to better reflect their logical difference. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg: align wrt log prints to the same formatShahar S Matityahu
Align wrt log prints to the driver coding style Remove the ext field from the log and print it at the beginning of the apply point. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: remove debug flow TLVShahar S Matityahu
Debug flow TLV was removed from the FW. Remove the TLV from the driver as well. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: verify debug TLVs at allocation phaseShahar S Matityahu
Reimplement debug TLV allocation flow. The driver will check the validity of the debug TLVs prior allocating space for them. Any malformed or unsupported TLV will be skipped. The TLV specific checks will be added in later patches. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: dbg_ini: use function to check if ini dbg mode is onShahar S Matityahu
use iwl_trans_dbg_ini_valid function instead of a boolean value check if dbg_ini mode is on. It is needed for a future patch. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: api: fix FTM struct documentationJohannes Berg
The real name is struct iwl_tof_range_req_ext_cmd, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: support per-platform antenna gainGil Adam
TX power limits as defined in the OTP assume the worst case scenario in terms of the platform's atenna gain, but most platforms are below that value so they can use more TX power without passing the regulatory limit. If the platform indicates in the BIOS that it indeed has lower gain, and the geographic location allows it, higher TX power can be used. The driver reads the PPAG (Per-Platform Antenna Gain) data from BIOS (if it exists), validates it and sends the appropriate command to the FW. This flow happens once at FW init, in case of suspend/resume there is no need to read again from BIOS as we save those values during init, so just send the PPAG command again to FW. Signed-off-by: Gil Adam <gil.adam@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: stop passing bogus gfp flags arguments to dma_alloc_coherentChristoph Hellwig
dma_alloc_coherent is not just the page allocator. The only valid arguments to pass are either GFP_ATOMIC or GFP_ATOMIC with possible modifiers of __GFP_NORETRY or __GFP_NOWARN. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-05-30 21:09:09 +0000