summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/iwl-config.h
AgeCommit message (Collapse)Author
2019-11-20iwlwifi: config: remove max_rx_agg_sizeJohannes Berg
This field isn't set by any configuration, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: dbg_ini: add monitor dumping supportShahar S Matityahu
Allow collecting monitor data in ini debug mode. Implement both SMEM and DRAM monitor regions dumping. For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several DRAM fragments per DBGC. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: add support for single antenna diversityHaim Dreyfuss
There are products which have a single chain with 2 antennas. In these products, we need to inform the FW that the device has the single antenna diversity(SAD) feature. In the future, we will read the active antenna from a BIOS configuration. Currently, we use a default configuration which means that the FW decides which antenna to use. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-08-29iwlwifi: pcie: handle switching killer Qu B0 NICs to C0Luca Coelho
We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-15iwlwifi: pcie: add support for qu c-step devicesLuca Coelho
Add support for C-step devices. Currently we don't have a nice way of matching the step and choosing the proper configuration, so we need to switch the config structs one by one. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: change 0x02F0 fw from qu to quzIhab Zhaika
change the fw of 0x02F0 platform from qu to quz Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: add new cards for 22000 and change wrong structsIhab Zhaika
add few PCI ID'S for 22000 and chainge few cards structs names Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24iwlwifi: add new cards for 22000 and fix struct nameIhab Zhaika
add few PCI ID'S for 22000 and fix the wrong name for one of the structs Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-19iwlwifi: remove unused 0x40C0 PCI device IDsLuca Coelho
This device ID and device type was never released, so we can remove it from the PCI IDs list. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-03iwlwifi: set 512 TX queue slots for AX210 devicesShaul Triebitz
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: add support for quz firmwaresLuca Coelho
Add a new configuration with a new firmware name for quz devices. And, since these devices have the same PCI device and subsystem IDs, we need to add some code to switch from a normal qu firmware to the quz firmware. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: for AX210 device support radio GF4Shaul Triebitz
Add support for radio gf4 (CDB radio). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: add support for 6-7 GHz channelsShaul Triebitz
Add UHB (ultra high band) channels and use 16 bit variables to fit the new channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: rename structs to fit the new namesIhab Zhaika
rename few structs to fit the new marketing names Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: add new cards for 22000 and killer series and change the market nameIhab Zhaika
Add a few PCI ID'S for 22000 and killer series in addition to chainging the marketing name. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: start using B-step for some 9000 devicesLuca Coelho
We don't support A-step for some device combinations anymore. So change them to use B-step, renaming and reorganizing the config structures. Additionally, fix one device that was using the wrong configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: align to new periphery address space for AX210 familyShaul Triebitz
In AX210 family, UMAC periphery address space moved from 0xA00000 to 0xD00000. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: introduce device family AX210Shaul Triebitz
Add new device family AX210. Make the needed changes for this family. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: implement BISR HW workaround for 22260 devicesJohannes Berg
There's a small hardware bug in 22260 devices which thus require a few more delays during initialization. Implement this workaround. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: move config structs to C fileJohannes Berg
Even if they're static const, there's no need to duplicate the structs every time they're included and used. Move them to an appropriate C file instead. Also remove useless parentheses along the way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: update product name for 9260 and 9560Ihab Zhaika
update the product name for the some of the cards from the series of 9260 and 9560 Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: remove support for 9000 A-step devicesLuca Coelho
We don't support 9000 A-step devices anymore, so we can remove support for loading both the a0/a0 and a0/b0 FWs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: add new cards for 22560, 9260 and killer seriesIhab Zhaika
add few PCI ID'S for 22560, 9260 and killer series. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: correct one of the PCI struct namesIhab Zhaika
One of the cfg struct names is mistakenly "iwl22000", when it should be "iwl22560". Chage-Id: If9fbfa4bceef81d028c90c98d47115fbe39da547 Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Fixes: 2f7a3863191a ("iwlwifi: rename the temporary name of A000 to the official 22000") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: add PCI IDs for the 22260 device seriesLuca Coelho
Add new structs and PCI IDs for 22260 devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modulesLuca Coelho
The devices with PCI device ID 0x34F0 are part of the SoC and can be combined with some different external RF modules. The configuration for these devices should reflect that, but are currently mixed up. To avoid confusion with discrete devices, add part of the firmware to be used and the official name of the device to the cfg structs. This is least reorganization possible (without messing things even more) that could be done as a bugfix for this SoC. Further reorganization of this code will be done separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-05Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26iwlwifi: support multiple tfd queue max sizes for different devicesGolan Ben Ami
22560 devices tfd queue max size is 2^16. Allow a configurable max size in the driver for supporting different devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: introduce device family 22560Golan Ben Ami
Device 22560 have many different hw and sw features than 22000 family, so introduce a new family of devices - 22560. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Additionally, support 22560 device csr flags and addresses. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for 22560 devicesLuca Coelho
Add support for the new 22560 family of devices and, while at it, reorganize the 22000 family so it fits better with the new one. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-25iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach
Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-26iwlwifi: make bitfield a u32 instead of u16Luca Coelho
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare it as u16. The compiler doesn't seem to have any problems with that (it probably automatically makes it u32), but it's cleaner to use a type that is long enough for all the flags. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: support new csr addresses for hw addressGolan Ben Ami
In future devices we use different csr addresses for hw addresses. Update csr addresses to support new and legacy devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: cfg: remove unnecessary cfg data in non-dvm devicesLuca Coelho
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: Revert "iwlwifi: pcie: dynamic Tx command queue size"Sara Sharon
This reverts commit dd05f9aab4426ff178b12d601e50d19d336eba30. Shorter TX queues support was added eventually without the need for the parameters this patch added. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-16iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho
Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-02Merge tag 'iwlwifi-next-for-kalle-2017-11-29' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi updates for v4.16 * Rename the temporary name A000 to 22000; * Change in the way we print the firmware version; * Remove some unused code; * Other small improvements; kvalo: There were conflicts, I fixed them with taking into account commit c2c48ddfc8b0 ("iwlwifi: fix firmware names for 9000 and A000 series hw"): CONFLICT (content): Merge conflict in drivers/net/wireless/intel/iwlwifi/iwl-config.h CONFLICT (modify/delete): drivers/net/wireless/intel/iwlwifi/cfg/a000.c deleted in ca495785063c428641cc6df8888afd2587ca6677 and modified in HEAD. Version HEAD of drivers/net/wireless/intel/iwlwifi/cfg/a000.c left in tree.
2017-11-28iwlwifi: rename the temporary name of A000 to the official 22000Luca Coelho
The family name A000 was just a place-holder when we didn't know what the official name would be yet. Now we know that the family name is 22000, so rename all occurrences accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-16iwlwifi: fix PCI IDs and configuration mapping for 9000 seriesLuca Coelho
A lot of PCI IDs were missing and there were some problems with the configuration and firmware selection for devices on the 9000 series. Fix the firmware selection by adding files for the B-steps; add configuration for some integrated devices; and add a bunch of PCI IDs (mostly for integrated devices) that were missing from the driver's list. Without this patch, a lot of devices will not be recognized or will try to load the wrong firmware file. Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2024-05-29 23:28:25 +0000