summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c
AgeCommit message (Collapse)Author
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: dbg_ini: add user trigger supportShahar S Matityahu
Allow to fire user trigger in ini mode Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: add a pointer to the trans_cfg directly in transLuca Coelho
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: LTR updatesAlex Malamud
New FW versions introduces LTR feature enablement by default. For such FW versions, driver (mvm/xvt) should not send host command to enable LTR feature, also it should be possible to override LTR configuration through the debugfs. 1. Send LTR feature enablement command only for FW versions which does not advertises SET_LTR_GEN2 capability. 2. Implement ltr_config file in debugfs for LTR configuration override. Signed-off-by: Alex Malamud <alex.malamud@intel.com>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: remove multiple debugfs entriesMordechay Goodstein
Now that we have per station control over amsdu size no need for multiple entries, especially that the old one is misleading due to not setting it for all protocols as a limit. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packetsMordechay Goodstein
The current debugfs entry only limits the max AMSDU for TCP. Add a new debugfs entry to allow setting a fixed AMSDU size for all TX packets, including UDP and ICMP Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: mvm: remove d3_sram debugfs fileJohannes Berg
This debugfs file is really old, and cannot work properly since the unified image support. Rather than trying to make it work, which is difficult now due to multiple images (LMAC/UMAC etc.) just remove it - we no longer need it since we properly do a FW coredump even in D3 cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03iwlwifi: mvm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: dbg_ini: separate between ini and legacy dump flowsShahar S Matityahu
Separate between ini and legacy dump flows to allow adding ini triggers that are not supported in the legacy flow and to increase readabilty. iwl_fw_dbg_ini_collect function is now called with legacy trigger id and _iwl_fw_dbg_ini_collect is called with ini trigger id. Also make the actual dumping function static so that any dump collection will go through iwl_fw_dbg_collect_sync. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: add read debugfs for he_sniffer_paramsLiad Kaufman
Return the AID currently set when reading this debugfs entry. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: reject new beacons when in inject modeSara Sharon
Verify we do not accept new beacon templates while beacon injection is active. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support beacon IE injectionSara Sharon
This is useful for automated tests. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: include configured sniffer AID in radiotapJohannes Berg
In order to make more sense out of the captured radiotap data e.g. when the configured AID changes, add the currently configured AID to the radiotap data as a vendor extension field. This is made race-free by updating the included value from inside the RX path (using a notification wait) for the command response from the firmware, which thus means it's serialized with frame RX. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: implement CSI reportingJohannes Berg
Implement CSI (channel estimation matrix) reporting in the mvm driver, if the firmware has the capability. Currently only a debugfs API is provided as the API is still under discussion. For now, RX aggregation must be disabled to use this feature on data frames as we haven't found a good way to attach the data to A-MPDUs, given complexities with multi-queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: save and export regdb blob from the NVMLuca Coelho
Sometimes we want to debug issues related to the regulatory blob in the NVM. To make that easier, add a debugfs entry to export it together with the other nvm blobs we export. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: clean up LDBG config command usageJohannes Berg
Clean up the LDBG config command to not be called "continuous recording", and while at it actually remove the continuous recording implementation completely since it was only used for store & forward architectures. This also fixes a bug at least in iwl_fw_dbg_buffer_allocation() because what's now "__le32 type" (matching the firmware) used to be "__le16 enable_recording", so the buffer allocation config sub-struct would erroneously have started at the wrong offset. In the other cases this didn't actually lead to a bug as other bytes in pad[] were all zeroes, so accessing the 16-bit value as a 32-bit value wouldn't make a difference (in little endian.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: add support for triggering ini triggersSara Sharon
Add support for ini triggers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: mvm: use match_string() helperYisheng Xie
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: enable sending HE_AIR_SNIFFER command via debugfsShaul Triebitz
In order to receive TB (Trigger Based) PPDU in monitor mode, the Driver must send the HE_AIR_SNIFFER_CONFIG_CMD host command. Enable that via debugfs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: support new rx_mpdu_desc apiGolan Ben Ami
22560 devices use a new rx_mpdu_desc api. Update the code to use the new api. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect U-APSD breaking aggregationJohannes Berg
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-02iwlwifi: avoid collecting firmware dump if not loadedShaul Triebitz
Trying to collect firmware debug data while firmware is not loaded causes various errors (e.g. failing NIC access). This causes even a bigger issue if at that time the HW radio is off. In that case, when later turning the radio on, the Driver fails to read the HW (registers contain garbage values). (It may be that the CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN bit is cleared on faulty NIC access - since the same behavior was seen in HW RFKILL toggling before setting that bit.) Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: define and use if iwl_mvm_has_tlc_offloadEmmanuel Grumbach
This aligns the code with the existing pattern to check if the firmware has a certain capability. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: support internal debug data collection for new devicesGolan Ben Ami
Support internal debug data collection on 9000 and newer devices. The method for finding the base and end address has changed on new HW's, so introduce a new version of debug destination tlv. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: request statistics when reading debugfsJohannes Berg
When statistics are read from debugfs, make sure that they are actually updated from the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: add size checks when printing to a bufferGregory Greenman
Replace sprintf by scnprintf throughout rs code. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: new rate scale API - add debugfs hooksGregory Greenman
This patch adds basic debugfs hooks for rate scaling. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-25iwlwifi: mvm: revert support new Coex firmware APIEmmanuel Grumbach
This new API will not be used, remove the code that supports it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06iwlwifi: mvm: add dbgfs entry for fw infoLiad Kaufman
Add a dbgfs entry for an easy way during runtime to check what FW file was loaded, and get some general FW-related data. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-18iwlwifi: move BT_MBOX_PRINT macro to common headerLuca Coelho
Move the BT_MBOX_PRINT() macro from mvm/debugfs.c to fw/api/coex.h so it can be reused and remove duplicate definition of BT_MBOX_MSG(), keeping only the one already in coex.h. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-18iwlwifi: mvm: support new Coex firmware APIEmmanuel Grumbach
The firmware now adds more information about time sharing with the Bluetooth core. Adapt the API structures and add the new fields in the debugfs hooks. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-18iwlwifi: mvm: remove the corunning supportEmmanuel Grumbach
The corunning block was supposed to help in coex scenarios. It required the driver to configure the firmware based on the coupling between the two antennas of the devices. This was never in use and the configuration sent by the driver has always been blank. Remove all that code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: fix the coex firmware APIEmmanuel Grumbach
The firmware API defined in the header files didn't match the structure that are actually passed by the firmware. The impact could be a decision for MIMO in Tx or Rx in coex scenarios. Fixes: 430a3bbafdc7 ("iwlwifi: mvm: BT Coex - new API") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: don't send CTDP commands via debugfs if not supportedMatt Chen
Fix this issue if it is not supported by the firmware. Fixes: 00f481bd895a ("iwlwifi: mvm: add ctdp operations to debugfs") Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: mvm: add debugfs to force CT-killChaya Rachel Ivgi
CT-kill is a thermal-based "RF-kill", which disables the NIC completely if the temperature gets too high, in order to avoid damage. Add a debugfs entry to simulate high temperatures, in order to test CT-kill flows in the driver without having to physically heat the device up. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: refactor firmware debug codeJohannes Berg
Split out the firmware debug code to be more general, so that it can be used by different subdrivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: track current firmware image in common codeJohannes Berg
Track the current firmware image in the common code instead of in the opmode so that later patches can access it there in a common way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: mvm: update rx statistics cmd apiLiad Kaufman
The API has changed - update the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: create new subdirectory for FW interactionJohannes Berg
There's a lot of mvm code that really should be more generic and part of the iwlwifi module. Start by making a place to keep such code - in the new "fw" subdirectory - and already move the firmware related header files there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: unify external & internal modparam namesJohannes Berg
Where possible (all except for "11n_disable", which isn't valid in C) rename the internal names for module parameters to be the same as the externally visible names, to aid finding their use etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: mvm: change when the BT_COEX is sentEmmanuel Grumbach
The BT_COEX command should not be sent to the INIT firmware image starting from 8000 family. The firmware team also requested to send the BT_COEX command after the PHY_DB_CMD and the PHY_CFG_CMD. While at it: s/iwl_send_bt_init_conf/iwl_mvm_send_bt_init_conf/ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: mvm: Add debugfs entry to retrieve SAR geographic profileHaim Dreyfuss
Add a debugfs entry to get a verbose description of the power settings used in each band with the currently selected SAR geographic profile. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-23iwlwifi: mvm: support new flush APIMordechai Goodstein
This new API allows flushing queues based on station ID and TID in A000 devices. One reason for using this is that tfd_queue_mask is only good for 32 queues, which is not enough for A000 devices. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: mvm: add and use iwl_mvm_device_running()Johannes Berg
This will help refactor this later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2024-05-27 21:56:56 +0000