summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)Author
2023-12-21wifi: iwlwifi: mvm: send TX path flush in rfkillJohannes Berg
If we want to drop packets, that's surely a good thing to do when we want to enter rfkill. Send this command despite rfkill so we can successfully clean up everything, we need to handle it separately since it has CMD_WANT_SKB, so it's not going to automatically return success when in rfkill. Fixes: d4e3a341b87b ("iwlwifi: mvm: add support for new flush queue response") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Don't mark DFS channels as NO-IRAndrei Otcheretianski
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR. For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while cfg80211 doesn't really expect NO-IR on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Allow DFS concurrent operationAndrei Otcheretianski
AX210 devices allow concurrent P2P operation on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS requestJohannes Berg
The firmware changed their mind, don't set the chains to zero, instead set them to 1 as we normally would for connections to APs that don't use MIMO. Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-18Merge tag 'wireless-next-2023-12-18' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18wifi: iwlwifi: pcie: don't synchronize IRQs from IRQJohannes Berg
On older devices (before unified image!) we can end up calling stop_device from an rfkill interrupt. However, in stop_device we attempt to synchronize IRQs, which then of course deadlocks. Avoid this by checking the context, if running from the IRQ thread then don't synchronize. This wouldn't be correct on a new device since RSS is supported, but older devices only have a single interrupt/queue. Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI") Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
2023-12-12wifi: iwlwifi: mvm: do not send STA_DISABLE_TX_CMD for newer firmwareEmmanuel Grumbach
Newest firmware has completely offloaded this logic and this command will be deprecated soon. Based on a capability bit advertised by the firmware, skip this command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.e64ef70c0133.I9f47cdef2ba45f1f383b70023857376973de3a8c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: remove async command callbackJohannes Berg
There's only one user of this code, which is STA unblock during sleep for uAPSD on really old devices. Instead of having this all through the API with calls up and down, just implemented a special-case CMD_BLOCK_TXQS flag for this, it's only needed in the old gen1 transport. While at it, fix a complain that lockdep would have, as we lock the cmd queue and then the TXQs in the reclaim by using spin_lock_nested(). We no longer need to disable BHs in iwl_trans_pcie_block_txq_ptrs() since it's called with them disabled already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: fw: file: don't use [0] for variable arraysJohannes Berg
This causes fortify warnings when compiled against recent kernels with recent compilers, and generally is not supported in the kernel anymore. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.367a2c77b9be.I4964ec8ca1d30c7c3163f9873814c8205a1a14eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: pcie: get_crf_id() can be voidJohannes Berg
This never returns an error and the return value is never checked anyway, so it can just be void. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.898b7e99206f.I61378115093fe70e6f5baca7f334651e4190eb3b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: pcie: dump CSRs before removalJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.a0e2198e9afd.I3bf737ba5ec1b3013218001e808f6bae0c834543@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: pcie: clean up device removal workJohannes Berg
We shouldn't access the device if we don't hold a reference, and if - after locking - we see that it has no bus, we also can't do anything, in fact, pci_stop_and_remove_bus_device() will be a no-op. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.6c0879e695f7.I1d3ce75ecad32a4cbf1b9dad61bfb7bc7821fdd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: mvm: add a debugfs hook to clear the monitor dataEmmanuel Grumbach
This can be used by the user space when it wants to clear the data we collected so far for privacy reasons. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.d5e97d5ec0d9.I7a5e836e6109e1fce7e6301dba8d1f28e60a5440@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: refactor RX tracingJohannes Berg
When there's not going to be any data in the data event, we don't need to add it at all (unlike the TX version, it has no data at all.) Also combine the tracing into a separate inline so we only call iwl_rx_trace_len() once, which also simplifies things, and lets us have a single place to later add other checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.13325a4848d2.Ic9e7d794fc4aebfe5ac5136b539ee62789f210f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: don't support triggered EHT CQI feedbackMiri Korenblit
EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI. The non-triggered CQI feedback bit was unset in a previous patch, but the triggered CQI feedback bit wasn't. Unset it. Fixes: 0e21ec6edbb5 ("wifi: iwlwifi: nvm: Update EHT capabilities for GL device") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.092528daf59e.I5715769490835819beddb00c91bbc9e806e170cb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: mvm: Correctly report TSF data in scan completeIlan Peer
For an MLO connection, the BSSID of the link used during the scanning should be used (and not the one from the default link). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.1e67dba640c1.I6c4941bfab3a04498370e58b402c64d990c39fbf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: mvm: Use the link ID provided in scan requestIlan Peer
If a valid link ID was provided in the scan request use it instead of picking one of the active links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.84e21c01b79d.Ib5f546d35542c6c561f5b944c08c9b1850f44146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: pcie: avoid a NULL pointer dereferenceAvraham Stern
It possible that while the rx rb is being handled, the transport has been stopped and re-started. In this case the tx queue pointer is not yet initialized, which will lead to a NULL pointer dereference. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: iwlwifi: pcie: add another missing bh-disable for rxq->lockJohannes Berg
Evidently I had only looked at all the ones in rx.c, and missed this. Add bh-disable to this use of the rxq->lock as well. Fixes: 25edc8f259c7 ("iwlwifi: pcie: properly implement NAPI") Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-01wifi: iwlwifi: fw: replace deprecated strncpy with strscpy_padJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Based on the deliberate `sizeof(dest) ... - 1` pattern we can see that both dump_info->dev_human_readable and dump_info->bus_human_readable are intended to be NUL-terminated. Moreover, since this seems to cross the file boundary let's NUL-pad to ensure no behavior change. strscpy_pad() covers both the NUL-termination and NUL-padding, let's use it. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231019-strncpy-drivers-net-wireless-intel-iwlwifi-fw-dbg-c-v2-1-179b211a374b@google.com
2023-11-29Merge tag 'wireless-2023-11-29' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== wireless fixes: - debugfs had a deadlock (removal vs. use of files), fixes going through wireless ACKed by Greg - support for HT STAs on 320 MHz channels, even if it's not clear that should ever happen (that's 6 GHz), best not to WARN() - fix for the previous CQM fix that broke most cases - various wiphy locking fixes - various small driver fixes * tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: use wiphy locked debugfs for sdata/link wifi: mac80211: use wiphy locked debugfs helpers for agg_status wifi: cfg80211: add locked debugfs wrappers debugfs: add API to allow debugfs operations cancellation debugfs: annotate debugfs handlers vs. removal with lockdep debugfs: fix automount d_fsdata usage wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap wifi: avoid offset calculation on NULL pointer wifi: cfg80211: hold wiphy mutex for send_interface wifi: cfg80211: lock wiphy mutex for rfkill poll wifi: cfg80211: fix CQM for non-range use wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta() wifi: mt76: mt7925: fix typo in mt7925_init_he_caps wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config ==================== Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-24wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()Dan Carpenter
This error path should return -EINVAL instead of success. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-12wifi: iwlwifi: fix system commands group orderingMiri Korenblit
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-10-23wifi: iwlwifi: drop NULL pointer check in iwl_mvm_tzone_set_trip_temp()Dmitry Antipov
Since 'tz_device' is an in-place member of 'struct iwl_mvm', it can't be NULL and so relevant check may be dropped. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231003092048.24998-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: bump FW API to 86 for AX/BZ/SC devicesGregory Greenman
Start supporting API version 86 for new devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.e2f720799600.I6e22188a47efe0cbb4e013259955c4019843799f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: read DSM func 2 for specific RF typesDaniel Gabay
By definition, this DSM func is valid only for HR/JF RF types. Until now firmware ignored this bit (if set) on other than the above types, but in future firmware versions sending this bit will lead to firmware 0x3426 assert. Avoid that by verifying the HW in driver first. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.eec3b5d6152f.Ibc7ffe5ef1c156d878f1300c6059c6c91b374114@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: show dump even for pldr_syncJohannes Berg
Worst case it's extra (garbage) data, best case we see why things failed ... Seems the trade-off is better if we print it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.30e614ecd540.I47324f555ebcf22d0dd0afa94e7ca0af53a9fdba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: cycle FW link on chanctx removalJohannes Berg
When the vif is in MLD mode, we'll get a vif links change from non-zero to zero on disassociation, which removes all links in the firmware and adds the 'deflink' the driver/mac80211 has. This causes the firmware to clear some internal state. However, in non-MLD mode, this doesn't happen, and causes some state to be left around in firmware, which can particularly cause trouble with the ref-BSSID in multi-BSSID, leading to an assert later if immediately making a new multi-BSSID connection with a different ref-BSSID. Fix this by removing/re-adding the link in the non-MLD case when the channel is removed from the vif. This way, all of the state will get cleared out, even if we need the deflink, which is more for software architecture purposes than otherwise. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.90c82837ba4d.I341fa30c480f7673b14b48a0e29a2241472c2e13@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: trace full frames with TX status requestJohannes Berg
If upper layers requested a TX status, then the frames are more important, so trace frames in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.0dfb60a2eaec.I3c3e46ed0eb05700a4d05d293f80d727354a402f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: empty overflow queue during flushMiri Korenblit
If a TX queue has no space for new TX frames, the driver will keep these frames in the overflow queue, and during reclaim flow it will retry to send the frames from that queue. But if the reclaim flow was invoked from TX queue flush, we will also TX these frames, which is wrong as we don't want to TX anything after flush. This might also cause assert 0x125F when removing the queue, saying that the driver removes a non-empty queue Fix this by TXing the overflow queue's frames only if we are not in flush queue flow. Fixes: a44509805895 ("iwlwifi: move reclaim flows to the queue file") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: fw: Add support for UATS table in UHBMukesh Sisodiya
Driver need to provide details of VLP, AFC AP type supported for the specific MCC to firmware. Driver will read the UATS (UHB AP type support) table from BIOS and sent to firmware using UATS_TABLE_CMD. Add the support for the same in the driver. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.eb6cf7be17b2.I8977a660564412056d9fd383d57b236cd4b22d00@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: add a print when sending RLC commandMiri Korenblit
Expand RLC logging to simplify the debug. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.ec227229263f.Iea36e64d4092e04ad561beb87002c7bb8c52596f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: debugfs for fw system statsAnjaneyulu
Add debgufs handler for fw system statistics command. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.e77efee7cd85.I99f370f26f94f73e06aec2a8eaf21ebcc82f60a9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: implement new firmware API for statisticsAnjaneyulu
The new firmware API uses a new command and notification, the command configures in which statistics types driver is interested and the notification is sent periodically. An additional change in the API is that most of the statistics data is accumulated and reported by the firmware per MLO link. Implement new command and notification handlers and adjust to per-link statistics. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.8cc7df0ebff2.If1dcb57145841c5b3c68ed112bbfcd0201f7acc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix regdb initializationGregory Greenman
In order to get regulatory domain, driver sends MCC_UPDATE_CMD to the FW. One of the parameters in the response is the status which can tell if the regdomain has changed or not. When iwl_mvm_init_mcc() is called during iwl_op_mode_mvm_start(), then sband is still NULL and channel parameters (i.e. chan->flags) cannot be initialized. When, further in the flow, iwl_mvm_update_mcc() is called during iwl_mvm_up(), it first checks if the regdomain has changed and then skips the update if it remains the same. But, since channel parameters weren't initialized yet, the update should be forced in this codepath. Fix that by adding a corresponding parameter to iwl_mvm_init_fw_regd(). Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.78b2c5b891b0.Iac49d52e0bfc0317372015607c63ea9276bbb188@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: update IGTK in mvmvif upon D3 resumeYedidya Benshimol
During the D3 resume flow, all new rekeys are passed from the FW. Because the FW supports only one IGTK at a time, every IGTK rekey update should be done by removing the last IGTK. The mvmvif holds a pointer to the last IGTK for that reason and thus should be updated when a new IGTK is passed upon resume. Fixes: 04f78e242fff ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow") Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.8ceaf7e5ece7.Ief444f6a2703ed76648b4d414f12bb4130bab36e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: simplify the reorder bufferEmmanuel Grumbach
The firmware / hardware of devices supporting RSS is able to report duplicates and packets that time out inside the reoder buffer. We can now remove all the complex logic that was implemented to keep all the Rx queues more the less synchronized: we used to send a message to all the queues through the firmware to teach the different queues about what is the current SSN every 2048 packets. Now that we rely on the firmware / hardware to detect duplicates, we can completely remove the code that did that in the driver and it has been reported that this code was spuriously dropping legit packets. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.54cf4d3d5956.Ic06a08c9fb1e1ec315a4b49d632b78b8474dab79@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: disable multi rx queue for 9000Emmanuel Grumbach
Multi rx queue allows to spread the load of the Rx streams on different CPUs. 9000 series required complex synchronization mechanisms from the driver side since the hardware / firmware is not able to provide information about duplicate packets and timeouts inside the reordering buffer. Users have complained that for newer devices, all those synchronization mechanisms have caused spurious packet drops. Those packet drops disappeared if we simplify the code, but unfortunately, we can't have RSS enabled on 9000 series without this complex code. Remove support for RSS on 9000 so that we can make the code much simpler for newer devices and fix the bugs for them. The down side of this patch is a that all the Rx path will be routed to a single CPU, but this has never been an issue, the modern CPUs are just fast enough to cope with all the traffic. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.2917eb8b7af9.Iddd7dcf335387ba46fcbbb6067ef4ff9cd3755a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Return success if link could not be removedBenjamin Berg
iwl_mvm_remove_link would return an error if the link could not be removed. However, doing so prevents recovery if a link was not uploaded to the FW in the first place and the link_info was not allocated or fw_link_id is not set. Returning success means that we can still try to continue with adding new links in change_vif_links. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.f89bc05aadf6.Idc8fbd671362d962c02b1df87fa6258733631580@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix size check for fw_link_idGregory Greenman
Check that fw_link_id does not exceed the size of link_id_to_link_conf array. There's no any codepath that can cause that, but it's still safer to verify in case fw_link_id gets corrupted. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.3385bd11f423.I2d30fdb464f951c648217553c47901857a0046c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: pcie: synchronize IRQs before NAPIJohannes Berg
When we want to synchronize the NAPI, which was added in commit 5af2bb3168db ("wifi: iwlwifi: call napi_synchronize() before freeing rx/tx queues"), we also need to make sure we can't actually reschedule the NAPI. Yes, this happens while interrupts are disabled, but interrupts may still be running or pending. Also call iwl_pcie_synchronize_irqs() to ensure we won't reschedule the NAPI. Fixes: 4cf2f5904d97 ("iwlwifi: queue: avoid memory leak in reset flow") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: add support for SNPS DPHYIP region typeDaniel Gabay
Add the required logic for parsing and dumping this new region. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.c859539194e7.I965482de2871e28b09f4572f1aa87ae4e3b366be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix netif csum flagsJohannes Berg
We shouldn't advertise arbitrary checksum flags since we had to remove support for it due to broken hardware. Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.e37327f1a129.Iaee86b00db4db791cd90adaf15384b8c87d2ad49@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: remove set_tim callback for MLD opsJohannes Berg
In new firmware, we don't need this any more and it won't be called any more by mac80211, since powersave handling is all done by firmware. Remove it from the MLD ops. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.1a1ded96ffc2.Ie49d3004acdd6299fb84346c76b2b2b2f195196b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: api: fix center_freq label in PHY diagramJohannes Berg
Somehow I managed to put the EHT line in the wrong place and also didn't indent the center_freq label correctly. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.08ac3cf524c0.I538f424e1ab30f73b0af8381224f377893e15526@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: support link id in SESSION_PROTECTION_NOTIFMiri Korenblit
FW is introducing an API change in which link ID will be used for session protection notif. Add support for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.4c59b149086e.I74fe93a6337f4ec9d1bd6f791d315411ac5b40da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: support link_id in SESSION_PROTECTION cmdMiri Korenblit
FW is introducing an API change in which link ID will be used for session protection cmd. Add support for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.a3cb29ed0617.I85b8a85b0d9186d3dd4d704254e46775b0ccf7de@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: make time_events MLO awareMiri Korenblit
As session protection API is moving to be per link instead of per mac, move the time events to be per link too. Since there is only one concurrent time event per mac, it feels unnecessary to have the time_event as a member of iwl_mvm_link_info. (That way we will have to iterate over all links each time we want to clear a time event, and also we will need mac80211 to tell us the link id when mgd_tx_complete() is called.) So leave this as a member of iwl_mvm_vif, but add the link id to the time_event structure. The link id in time_event will only be maintained and used for: 1. When SESSION_PROTECTION_CMD is supported (before it, we don't have MLO) 2. For time_events of types SESSION_PROTECT_CONF_ASSOC, SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, and SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION (not for aux roc/ Hot Spot time_events). For P2P, non-MLO connections, and pre-MLD API, deflink id, meaning 0, will be used Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.21496bcacb18.I79d037325b4fae4c12a22d9477e53fc9c537ad46@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: add support for activating UNII-1 in WW via BIOSMiri Korenblit
There is a requirement from OEMs to support a new bit in DSM function 8, which will indicate that this device is an indoor one, and that it should activate UNII-1 (5.2GHz) sub band in the World Wide Geo Profile. Add support for this by reading this bit from BIOS and sending it to the FW. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.86d4ad178042.Ief40acc08b5482ff147fd17e74e36f1933e43def@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-22 12:55:48 +0000