summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2014-05-13Merge remote-tracking branch 'iwlwifi-fixes/master' into HEADEmmanuel Grumbach
2014-05-11iwlwifi: remove spurious newline in KconfigJohannes Berg
There's an extra newline that shouldn't be there - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: cause build error on missing newlineJohannes Berg
If a (debug) message is missing a newline, cause build error so we don't keep reintroducing this problem. This also prevents using a non-constant argument as the format string which is a good idea anyway (e.g. for security reasons.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: Disable uAPSD for a DCM clientAvri Altman
A binding object associates virtual MACs to a Phy. Binding object can ask (and get) air time, thus allowing several MACs to share the medium. A binding object can be in either one of 3 states: 1) standalone - A single active MAC 2) Different Channel Mode (DCM) - There are 2 active MACs or more (not necessarily just clients), but each has its own channel. 3) Same Channel Mode (SCM) - There are 2 active MACs or more (not necessarily just clients), that share the same channel. This patch introduces an additional condition for enabling uAPSD: uAPSD should be disabled for a client in DCM. The reason for that is a low latency issue in Miracast. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: Add power management support for P2P DCMAvri Altman
If two clients are active while each one is alone on its channel, and the applicable flags are set, power management should be enabled. This condition is referred to as Different Channel Mode (DCM). Up to now, in DCM power management was supported only on BSS. This patch adds support for P2P power management in DCM as well. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: fix setting channel in monitor modeEmmanuel Grumbach
There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 #4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [<ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [<ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [<ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [<ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [<ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [<ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [<ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [<ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [<ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [<ffffffff810d6cb7>] check_prevs_add+0x977/0x980 [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [<ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80 [<ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0 [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [<ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [<ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [<ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: <stable@vger.kernel.org> [3.13+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: stop sched scan before associationDavid Spinadel
Stop sched scan on bss_info_changed if !idle to avoid sched scan during association. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: notify sched scan complete from stop routineDavid Spinadel
Add an option to notify mac80211 about sched scan complete from iwl_mvm_stop_sched_scan(), to enable this notification when the stop was called from within the driver. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: add channel 14 to the low band listEran Harary
in family 8000: additional channel 14 added to the low band list. now the number of channels in the low band is 15. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: pcie: try to get ownership several timesEmmanuel Grumbach
Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: 8000: add default NVM file name in family 8000Eran Harary
The 8000 family products need a file on the file system which is used as NVM. This file is a must, if no filename is supplied as module parameter, use a default filename. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: dvm: don't use _ni mac80211's callbacksEmmanuel Grumbach
This is not needed since the PCIe layer disables the bottom halves before it calls the op_mode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: add missing trailing newlines to debug messagesJohannes Berg
All messages should have a trailing newline, add all the missing ones. Also make all messages constants, replacing the single one that pointlessly used a variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-07iwlwifi: pcie: disable interrupts upon PCIe allocEmmanuel Grumbach
In case RFKILL is in KILL position, the NIC will issue an interrupt straight away. This interrupt won't be sent because it is masked in the hardware. But if our interrupt service routine is called for another reason (SHARED_IRQ), then we'll look at the interrupt cause and service it. This can cause bad things if we are not ready yet. Explicitly clean the interrupt cause register to make sure we won't service anything before we are ready to. Cc: <stable@vger.kernel.org> [3.14] Reported-and-tested-by: Alexander Monakov <amonakov@gmail.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-07iwlwifi: mvm: rs: enable MCS9 for TxEyal Shapira
After fixes to the rs algorithm reenable MCS9. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: fix sparse warning when _DEBUGFS isn't setEmmanuel Grumbach
Since the declaration of iwl_mvm_fw_error_rxf_dump and iwl_mvm_fw_error_sram_dump is under ifdef CONFIG_IWLWIFI_DEBUGFS, do the same for their implementation. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: implement mac80211's flush callbackEmmanuel Grumbach
This allows mac80211 to flush the Tx queues before it sends critical management frames. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi:mvm: Add AP/GO channel switch supportAndrei Otcheretianski
Publish WIPHY_FLAG_HAS_CHANNEL_SWITCH if the fw supports newly introduced IWL_UCODE_TLV_API_CSA_FLOW. When CSA starts, save the switching vif inside mvm and during the CSA period configure fw with a new beacon after each beacon transmission in order to update the csa counters. Also, handle correctly the CSA unbind-bind flow which is triggered by mac80211 when the actual channel switch happens. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: wait for d0i3 exit in some more ampdu actionsEliad Peller
Some ampdu actions change queues by direct target access. Since the bus is disabled in d0i3, make sure to exit d0i3 before handling these actions. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm/pcie: capture last commands on firmware errorJohannes Berg
When a firmware error occurs, capture the last 32 commands (which are still in memory) in the error dump debugfs file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: do no sched scan while associatedDavid Spinadel
Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: pcie: get rid of q->n_bdJohannes Berg
This variable always tracks a constant value (256) so there's no need to have it. Removing it simplifies code generation, reducing the .text size (by about 240 bytes on x86-64.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: pcie: use bool for iwl_pcie_txq_build_tfd() argumentJohannes Berg
The 'reset' argument is clearly a boolean, so use bool instead of u8 with 0/1 values. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: make LED support optionalJohannes Berg
If there's no LED on the system, it doesn't make a lot of sense to include close to 4k of LED-related code (mostly in mac80211), so instead of forcing LED support into the kernel, don't build iwlwifi/mac80211 LED support if there's no LED class support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: EliadX Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: fix bug in parse_nvm_sectionsEran Harary
The old code checks if hw_section_num is valid while the right thing to do is to check if section[hw_section_num].data is valid. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: select the MAC address according to priorityEran Harary
For family 8000 products, the driver should take the MAC address from the mac_override section and only if this section is empty it should take it from the HW section. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: Prioritize external nvm values on top of the OTP valuesEran Harary
Read first the nvm sections from the OTP, then read the nvm sections from the external file and override the OTP values (if there were any values in the OTP). Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: prevent nic to powered up at driver loadEran Harary
A few devices aren't allowed to be powered up at driver load time. Add "power_up_nic_in_init" flag to iwl_cfg structure to customize the load flow according to the device. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: fix bug with OTP memory sizeEran Harary
OTP size changed in family 7000 and in family 8000. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: remove useless variableJohannes Berg
There's no need to use a variable just to return the result of another function call at the end of a function, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs: choose correct expected tpt tableEyal Shapira
The expected throughput table used when estimating a new column depends on the channel bandwidth. When switching from legacy to siso or mimo the wrong expected throughput table was used as it was chosen based on the the channel bandwidth in legacy which is always 20Mhz. Instead it should be chosen based on the current sta bandwidth which could be also 40Mhz or 80Mhz. When enabling MCS9 this bug leads to a problem where the max expected throughput of the siso or mimo column is 0 as MCS9 isn't supported in 20Mhz. This in turns prevents switching to siso or mimo. Fix this by using the sta bandwidth when deciding which table to choose. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs: avoid TPC while in search cycleEyal Shapira
TPC is a power optimization which should only be attempted when we're in the "stay in column" state after we've locked onto an optimal rate. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs: don't allow TPC when power save is disabledEyal Shapira
Currently we were checking only if the driver power_scheme is set to CAM. TPC shouldn't be enabled also when disabling powersave on the interface (e.g. iw wlan0 set power_save off) which may occur even if power_scheme wasn't set to CAM. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs: overhaul rs_get_best_rateEyal Shapira
rs_get_best_rate determines the optimal rate to try in a new Tx column. Currently we were sometimes trying a too high rate which would lead us to fail and avoid switching to the new column despite it having a potential to be better. Change the logic to try and find the first rate which would exceed the current actual throughput or be more aggressive if the success ratio is good. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: rs: revert changes to search cycle rulesEyal Shapira
Adding more options in the search cycle causes longer search cycles with additional wondering off to non optimal Tx configurations. Reduce the Tx configurations searched to improve throughput in non optimal attenuations. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextEmmanuel Grumbach
2014-05-06Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
2014-05-06iwlwifi: mvm: rs - s/CPTCFG/CONFIGEmmanuel Grumbach
My bad - I forgot to update this when sending the patch upstream. Fixes: 87d5e4155c00 ("iwlwifi: mvm: rs: reinit rs if no tx for a long time") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: BT Coex - fix validity flags during initEmmanuel Grumbach
The commit below introduced a bug in the validity bits in init. Due to that, all the Coex mechanism stopped sending kills to the BT side. Fix that. Fixes: b9fae2d54c9f ("iwlwifi: mvm: BT Coex add support for Co-running block") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-04-13iwlwifi: don't disable SCD chain extension on newer devicesEmmanuel Grumbach
7000 device series have a fix for this hardware feature. Stop disabling it, and get an improvement in Tx throughput. This feature allows the scheduler to fetch more frames on the fly while an A-MPDU is being built - which means that we can get larger A-MPDU. This, of course, give an improvement in the Tx throughput. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: Re-factor enabling uAPSD logicAvri Altman
The driver can enable uAPSD and specify some of its related parameters. This patch organizes this logic in a separate function. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: replace leading spaces by tabsEmmanuel Grumbach
Somehow I added spaces instead of tabs to a few lines in debugfs.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: don't use d3 fw if d0i3 is usedEliad Peller
bail out from the suspend/resume callbacks if d0i3 is used. declare support for ANY wowlan trigger (i.e. normal operation). On resume, we shouldn't execute the d0i3 exit flow (which might disconnect stations, etc.) until mac80211 was resumed. Add new flags to indicate we are in suspend, and call the pending exit work on resume. Since the resume flow can take some time, add a new EXIT_WORK reference type to prevent going back to d0i3 at this stage. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: 7000: bump firmware API version to 9Emmanuel Grumbach
Also warn if an older firmware is loaded. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: Add support for Energy based scan (EBS)Haim Dreyfuss
This patch enables Energy Based Scan (EBS) - intended to detect energy on 5 GHz band channels. Passive scan on this band takes up to 2.64 sec assuming 110mSec per-channel * 24 channels. EBS is designed to detect energy on channels with intensive Wifi activity as well as those where only beacons are transmitted. EBS completes sampling all channels within shortest beacon frame transmission time. Total EBS duration is about 100 msec (typical beacon interval). Detecting Wifi activity on 5 GHz band channels can significantly reduce scan duration thus saving time and power. EBS failure reported by FW disables EBS for current connection. It is re-enabled upon new connection attempt on any WLAN interface. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: BT Coex - send priority tables from iwl_send_bt_init_confEmmanuel Grumbach
Calling iwl_send_bt_init_conf for INIT firmware is not a problem, and calling iwl_send_bt_prio_tbl from iwl_send_bt_init_conf allows us to prepare for new API. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: BT Coex - minor API changeEmmanuel Grumbach
The BT Coex API underwent a minor backward compatible API change. We now need to set an invalid value in the override fields. While at it, add kerneldoc comments on the fields in the command. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: BT Coex - don't use comma operatorEmmanuel Grumbach
This is really not needed. This is a remainder from a C99 initialiser. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit (git 2.34.1) at 2025-04-01 14:17:59 +0000