summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2012-02-17iwlwifi: SRAM size moves from hw_params to cfgEmmanuel Grumbach
This will allow to set the hw_params after we fetch the uCode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: save ucode capabilities in iwl_fwDon Fry
The capabilities parsed from the ucode file are never saved. Save them in the iwl_fw structure. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: changes args to iwl_nic for firmware operationsDon Fry
Remove the references to iwl_priv from the firmware request and parsing routines. They are generic to the nic. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: the transport knows its stateEmmanuel Grumbach
This allows to handle races such as Tx packets on their way to be sent although the transport has been stopped already. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move event and err pointers to iwl_nicDon Fry
Move the ucode offset pointers to the iwl_nic as they are nic related. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: document the transport layerEmmanuel Grumbach
Fix a few typos in the existing comments too. Enforce the comments with might_sleep. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: send testmode hcmd reply with rx headerAmit Beka
When a host command is sent through testmode, the whole reply (including rx header) is returned to the user, and not only the payload of the rx. Before this commit the length was buggy - the reply contained 4 bytes after the end of the payload. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: fixes to testmode indirect accessAmit Beka
Fixed casting of buffer addressing, and added size to the read method, like in __iwl_read_prph. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: use enhance_sensitivity from iwl_fwEmmanuel Grumbach
Remove another dependency between the nic layer and the iwl_priv struct. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: iwl_set_hw_params returns always 0Emmanuel Grumbach
Remove the return value. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: kill iwl_down and s/__iwl_down/iwl_downEmmanuel Grumbach
iwl_down was just a wrapper around __iwl_down which was called from one place only. Replace it to direct call to iwl_down. Add lockdep warning in iwl_down to ensure it was called with the mutex held. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: change args to ucode routinesDon Fry
Change the prameters to the ucode (de)allocate routines to iwl_nic as they are not transport operations. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: Move ucode pointers to iwl_fwDon Fry
The ucode image is a ucode related thing not a transport one. Move them. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move firmware_loading_complete to iwl_nicDon Fry
Move firmware_loading_complete from iwl_priv to iwl_nic and rename it to more accurately reflect what it does. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move firmware_name to iwl_nicDon Fry
Delete firmware_name from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move fw_index from iwl_priv to iwl_nicDon Fry
Delete fw_index from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move ucode_ver to iwl_nicDon Fry
Delete ucode_ver from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: create iwl_nic structureDon Fry
Create iwl_nic structure and link it together. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: give PCIe its own lockJohannes Berg
Instead of using a global lock, the PCIe transport can use an own lock for its IRQ. This will make it possible to not disable IRQs for the shared lock. The lock is currently used throughout the code but this can be improved even further by splitting up the locking for the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move workqueue to privJohannes Berg
In order to separate the different parts of the driver better, we are reducing the shared data. This moves the workqueue to "priv", and removes it from the transport. To do this, simply use schedule_work() in the transport. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: trace debug messagesJohannes Berg
Make iwlwifi record all debug messages into tracing, even if debug_level is not enabled. Due to the lack of APIs, the debug messages are now recorded up to a max length of 100, the only one above that is the RXON which is not needed if you trace the commands as well as it only dumps the command contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: added reply data to testmode HCMD sendAmit Beka
The testmode command for host command send now replies with a nl80211 message and the response it recieved from the device. This does not change the API directly, but adds a reply to the testmode call. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: testmode new indirect RW APIAmit Beka
Replaced the old SRAM and periphery indirect access functions with a unified indirect memory access functions. These include new IWL_TM_CMDs for buffer read/write/dump which replace the SRAM read/dump commands, but the API for IWL_TM_CMD_INDIRECT_REG read/write will now not be supported (returns error). This also handles writing to periphery registers in 1-3 bytes. Requires the corresponding patch in the library for the API change. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: log as error when error detectedWey-Yi Guy
A lot of error conditions in testmode log as IWL_DEBUG_INFO which is not logged by default. Change it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-06Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi
2012-02-02iwlwifi: range check to testmode direct reg accessAmit Beka
Added a check on the direct register access. Checks that the address is in the lower ragnge (0x0-0x2000), which belongs to CSR, HBUS and FH registers. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: release IRQ in error pathJohannes Berg
smatch correctly complains: iwl-trans-pcie.c +1528 iwl_trans_pcie_start_hw(50) warn: 'trans->irq' was not released on error Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move all ucode routines to iwl-ucode.cDon Fry
The routines dealing with the ucode are spread through several files. Move them all to the same file and create a iwl-ucode.h file with the ucode file definitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move bcast_sta_id init to common routineDon Fry
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: clarify commentDon Fry
change a comment to be a little more clear Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: debug print in tx_queue_set_status is more clearEmmanuel Grumbach
The message was misleading when a queue is deactivated. The fifo number is irrelevant then, so don't print it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: stop_hw replace enable_rfkill_intEmmanuel Grumbach
This trans_ops->stop_hw leaves the RFKILL interrupt enabled, we can call that one instead of enable_rfkill_int. By that, we reduce the numbers of acceesses to the NIC from the upper layers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move hw_rev to transport layerEmmanuel Grumbach
The HW revision is now read by the transport layer in its allocation. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_get_hw_idEmmanuel Grumbach
Get this information from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_get_hw_id_stringEmmanuel Grumbach
Get this information from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_is_pm_supportedEmmanuel Grumbach
Get this information from the transport layer which is now in charge of the APM too. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_apm_configEmmanuel Grumbach
This handler was called from the transport layer only. Merge it to the transport's apm_init. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: consolidate the start_device flowEmmanuel Grumbach
Now there is only one transport function that launch a specific fw: trans_ops->start_fw. This one replaces trans_ops->start_device and trans_ops->kick_nic. The code that actually loads the fw to the device has been moved to the transport specific code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move the RF kill logic from iwl_probe to transportEmmanuel Grumbach
This is another clean up of the proble flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: introduce trans_ops->stop_hwEmmanuel Grumbach
This handler stops the HW and puts it in low power state. It will allow to clean up the flows in the upper layers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move apm_init to start_hwEmmanuel Grumbach
This is transport related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move prepare_card_hw to start_hwEmmanuel Grumbach
Kill the trans_ops->prepare_card_hw which is now useless. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: rename trans_ops->request_irq to trans_ops->start_hwEmmanuel Grumbach
This handler will become thicker, reflect its real role now. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: don't use the bus for ucode fw_desc any moreEmmanuel Grumbach
This is transport related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: remove the pointer to dev from the bus layerEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: give trans to all the read / write functionsEmmanuel Grumbach
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: the read / write register ops move to transportEmmanuel Grumbach
Most of the accesses to the registers are done from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move the bus configuration to transportEmmanuel Grumbach
All the bus configuration is now done in the transport allocation fucntion. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: allocate the transport from the bus layerEmmanuel Grumbach
Change the way we alloc the transport on the way. Since the transport is allocated from a bus specific area, we can give the bus specific parameters (i.e. pci_dev for PCI) to the transport. This will be useful when the bus layer will be killed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit (git 2.34.1) at 2025-05-22 06:40:00 +0000