summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/marvell/mwifiex
AgeCommit message (Collapse)Author
2022-04-06mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queueNiels Dossche
cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx) is held during the function's execution. mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not hold that lock, therefore violating the assertion. Add a lock around the call. Disclaimer: I am currently working on a static analyser to detect missing locks. This was a reported case. I manually verified the report by looking at the code, so that I do not send wrong information or patches. After concluding that this seems to be a true positive, I created this patch. However, as I do not in fact have this particular hardware, I was unable to test it. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220321225515.32113-1-dossche.niels@gmail.com
2022-03-16mwifiex: make read-only array wmm_oui static constColin Ian King
Don't populate the read-only array wmm_oui on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220311225610.10895-1-colin.i.king@gmail.com
2022-03-06wireless: Marvell: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi017@gmail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-08mwifiex: Fix possible ABBA deadlockBrian Norris
Quoting Jia-Ju Bai <baijiaju1990@gmail.com>: mwifiex_dequeue_tx_packet() spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 1432 (Lock A) mwifiex_send_addba() spin_lock_bh(&priv->sta_list_spinlock); --> Line 608 (Lock B) mwifiex_process_sta_tx_pause() spin_lock_bh(&priv->sta_list_spinlock); --> Line 398 (Lock B) mwifiex_update_ralist_tx_pause() spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 941 (Lock A) Similar report for mwifiex_process_uap_tx_pause(). While the locking expectations in this driver are a bit unclear, the Fixed commit only intended to protect the sta_ptr, so we can drop the lock as soon as we're done with it. IIUC, this deadlock cannot actually happen, because command event processing (which calls mwifiex_process_sta_tx_pause()) is sequentialized with TX packet processing (e.g., mwifiex_dequeue_tx_packet()) via the main loop (mwifiex_main_process()). But it's good not to leave this potential issue lurking. Fixes: f0f7c2275fb9 ("mwifiex: minor cleanups w/ sta_list_spinlock in cfg80211.c") Cc: Douglas Anderson <dianders@chromium.org> Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Link: https://lore.kernel.org/linux-wireless/0e495b14-efbb-e0da-37bd-af6bd677ee2c@gmail.com/ Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/YaV0pllJ5p/EuUat@google.com
2021-11-26mwifiex: Ignore BTCOEX events from the 88W8897 firmwareJonas Dreßler
The firmware of the 88W8897 PCIe+USB card sends those events very unreliably, sometimes bluetooth together with 2.4ghz-wifi is used and no COEX event comes in, and sometimes bluetooth is disabled but the coexistance mode doesn't get disabled. This means we sometimes end up capping the rx/tx window size while bluetooth is not enabled anymore, artifically limiting wifi speeds even though bluetooth is not being used. Since we can't fix the firmware, let's just ignore those events on the 88W8897 device. From some Wireshark capture sessions it seems that the Windows driver also doesn't change the rx/tx window sizes when bluetooth gets enabled or disabled, so this is fairly consistent with the Windows driver. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211103205827.14559-1-verdre@v0yd.nl
2021-11-26mwifiex: Ensure the version string from the firmware is 0-terminatedJonas Dreßler
We assume at a few places that priv->version_str is 0-terminated, but right now we trust the firmware that this is the case with the version string we get from it. Let's rather ensure this ourselves and replace the last character with '\0'. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211103201800.13531-4-verdre@v0yd.nl
2021-11-26mwifiex: Add quirk to disable deep sleep with certain hardware revisionJonas Dreßler
The 88W8897 PCIe+USB card in the hardware revision 20 apparently has a hardware issue where the card wakes up from deep sleep randomly and very often, somewhat depending on the card activity, maybe the hardware has a floating wakeup pin or something. This was found by comparing two MS Surface Book 2 devices, where one devices wifi card experienced spurious wakeups, while the other one didn't. Those continuous wakeups prevent the card from entering host sleep when the computer suspends. And because the host won't answer to events from the card anymore while it's suspended, the firmwares internal power saving state machine seems to get confused and the card can't sleep anymore at all after that. Since we can't work around that hardware bug in the firmware, let's get the hardware revision string from the firmware and match it with known bad revisions. Then disable auto deep sleep for those revisions, which makes sure we no longer get those spurious wakeups. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211103201800.13531-3-verdre@v0yd.nl
2021-11-26mwifiex: Use a define for firmware version string lengthJonas Dreßler
Since the version string we get from the firmware is always 128 characters long, use a define for this size instead of having the number 128 copied all over the place. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211103201800.13531-2-verdre@v0yd.nl
2021-11-26mwifiex: Fix skb_over_panic in mwifiex_usb_recv()Zekun Shen
Currently, with an unknown recv_type, mwifiex_usb_recv just return -1 without restoring the skb. Next time mwifiex_usb_rx_complete is invoked with the same skb, calling skb_put causes skb_over_panic. The bug is triggerable with a compromised/malfunctioning usb device. After applying the patch, skb_over_panic no longer shows up with the same input. Attached is the panic report from fuzzing. skbuff: skb_over_panic: text:000000003bf1b5fa len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8 tail:0x844 end:0x840 dev:<NULL> kernel BUG at net/core/skbuff.c:109! invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60 RIP: 0010:skb_panic+0x15f/0x161 Call Trace: <IRQ> ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] skb_put.cold+0x24/0x24 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 </IRQ> Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home
2021-11-17net: annotate accesses to queue->trans_startEric Dumazet
In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28mwifiex: fix division by zero in fw download pathJohan Hovold
Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail. Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: stable@vger.kernel.org # 3.5 Cc: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211027080819.6675-4-johan@kernel.org
2021-10-20wireless: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert wireless from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211018235021.1279697-3-kuba@kernel.org
2021-10-20wireless: use eth_hw_addr_set()Jakub Kicinski
Convert all WiFi drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211018235021.1279697-2-kuba@kernel.org
2021-10-20mwifiex: Deactive host sleep using HSCFG after it was activated manuallyJonas Dreßler
When powersaving (so either wifi powersaving or deep sleep, depending on which state the firmware is in) is disabled, the way the firmware goes into host sleep is different: Usually the firmware implicitely enters host sleep on the next SLEEP event we get when we configured host sleep via HSCFG before. When powersaving is disabled though, there are no SLEEP events, the way we enter host sleep in that case is different: The firmware will send us a HS_ACT_REQ event and after that we "manually" make the firmware enter host sleep by sending it another HSCFG command with the action HS_ACTIVATE. Now waking up from host sleep appears to be different depending on whether powersaving is enabled again: When powersaving is enabled, the firmware implicitely leaves host sleep as soon as it wakes up and sends us an AWAKE event. When powersaving is disabled though, it apparently doesn't implicitely leave host sleep, but instead we need to send it a HSCFG command with the HS_CONFIGURE action and the HS_CFG_CANCEL condition. We didn't do that so far, which is why waking up from host sleep was broken when powersaving is disabled. So add some additional state to mwifiex_adapter where we keep track of whether host sleep was activated manually via HS_ACTIVATE, and if that was the case, deactivate it manually again via HS_CFG_CANCEL. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211016153244.24353-6-verdre@v0yd.nl
2021-10-20mwifiex: Send DELBA requests according to specJonas Dreßler
While looking at on-air packets using Wireshark, I noticed we're never setting the initiator bit when sending DELBA requests to the AP: While we set the bit on our del_ba_param_set bitmask, we forget to actually copy that bitmask over to the command struct, which means we never actually set the initiator bit. Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command struct. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Acked-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211016153244.24353-5-verdre@v0yd.nl
2021-10-20mwifiex: Fix an incorrect commentJonas Dreßler
We're sending DELBA requests here, not ADDBA requests. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211016153244.24353-4-verdre@v0yd.nl
2021-10-20mwifiex: Log an error on command failure during key-material uploadJonas Dreßler
Sometimes the KEY_MATERIAL command can fail with the 88W8897 firmware (when this happens exactly seems pretty random). This appears to prevent the access point from starting, so it seems like a good idea to log an error in that case. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211016153244.24353-3-verdre@v0yd.nl
2021-10-20mwifiex: Don't log error on suspend if wake-on-wlan is disabledJonas Dreßler
It's not an error if someone chooses to put their computer to sleep, not wanting it to wake up because the person next door has just discovered what a magic packet is. So change the loglevel of this annoying message from ERROR to INFO. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211016153244.24353-2-verdre@v0yd.nl
2021-10-18mwifiex: Try waking the firmware until we get an interruptJonas Dreßler
It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the 88W8897 card sometimes ignores or misses when we try to wake it up by writing to the firmware status register. This leads to the firmware wakeup timeout expiring and the driver resetting the card because we assume the firmware has hung up or crashed. Turns out that the firmware actually didn't hang up, but simply "missed" our wakeup request and didn't send us an interrupt with an AWAKE event. Trying again to read the firmware status register after a short timeout usually makes the firmware wake up as expected, so add a small retry loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to check whether the card woke up. The number of tries and timeout lengths for this were determined experimentally: The firmware usually takes about 500 us to wake up after we attempt to read the status register. In some cases where the firmware is very busy (for example while doing a bluetooth scan) it might even miss our requests for multiple milliseconds, which is why after 15 tries the waiting time gets increased to 10 ms. The maximum number of tries it took to wake the firmware when testing this was around 20, so a maximum number of 50 tries should give us plenty of safety margin. Here's a reproducer for those firmware wakeup failures I've found: 1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on) 2) Connect to any wifi network (makes firmware go into wifi powersaving mode, not deep sleep) 3) Make sure bluetooth is turned off (to ensure the firmware actually enters powersave mode and doesn't keep the radio active doing bluetooth stuff) 4) To confirm that wifi powersaving is entered ping a device on the LAN, pings should be a few ms higher than without powersaving 5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and suspends the firmware extremely often 6) Wait until things explode, for me it consistently takes <5 minutes BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Cc: stable@vger.kernel.org Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011133224.15561-3-verdre@v0yd.nl
2021-10-18mwifiex: Read a PCI register after writing the TX ring write pointerJonas Dreßler
On the 88W8897 PCIe+USB card the firmware randomly crashes after setting the TX ring write pointer. The issue is present in the latest firmware version 15.68.19.p21 of the PCIe+USB card. Those firmware crashes can be worked around by reading any PCI register of the card after setting that register, so read the PCI_VENDOR_ID register here. The reason this works is probably because we keep the bus from entering an ASPM state for a bit longer, because that's what causes the cards firmware to crash. This fixes a bug where during RX/TX traffic and with ASPM L1 substates enabled (the specific substates where the issue happens appear to be platform dependent), the firmware crashes and eventually a command timeout appears in the logs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Cc: stable@vger.kernel.org Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl
2021-10-13wireless: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
2021-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28mwifiex: avoid null-pointer-subtraction warningArnd Bergmann
clang complains about some NULL pointer arithmetic in this driver: drivers/net/wireless/marvell/mwifiex/sta_tx.c:65:59: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*local_tx_pd) + hroom)- ^ drivers/net/wireless/marvell/mwifiex/uap_txrx.c:478:53: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] pad = ((void *)skb->data - (sizeof(*txpd) + hroom) - NULL) & Rework that expression to do the same thing using a uintptr_t. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210927121656.940304-1-arnd@kernel.org
2021-09-21mwifiex: Fix copy-paste mistake when creating virtual interfaceJonas Dreßler
The BSS priority here for a new P2P_CLIENT device was accidentally set to an enum that's certainly not meant for this. Since MWIFIEX_BSS_ROLE_STA is 0 anyway, we can just set the bss_priority to 0 instead here. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-10-verdre@v0yd.nl
2021-09-21mwifiex: Properly initialize private structure on interface type changesJonas Dreßler
When creating a new virtual interface in mwifiex_add_virtual_intf(), we update our internal driver states like bss_type, bss_priority, bss_role and bss_mode to reflect the mode the firmware will be set to. When switching virtual interface mode using mwifiex_init_new_priv_params() though, we currently only update bss_mode and bss_role. In order for the interface mode switch to actually work, we also need to update bss_type to its proper value, so do that. This fixes a crash of the firmware (because the driver tries to execute commands that are invalid in AP mode) when switching from station mode to AP mode. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-9-verdre@v0yd.nl
2021-09-21mwifiex: Handle interface type changes from AP to STATIONJonas Dreßler
Looks like this case was simply overseen, so handle it, too. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-8-verdre@v0yd.nl
2021-09-21mwifiex: Allow switching interface type from P2P_CLIENT to P2P_GOJonas Dreßler
It's possible to change virtual interface type between P2P_CLIENT and P2P_GO, the card supports that just fine, and it happens for example when using miracast with the miraclecast software. So allow type changes between P2P_CLIENT and P2P_GO and simply call into mwifiex_change_vif_to_p2p(), which handles this just fine. We have to call mwifiex_cfg80211_deinit_p2p() before though to make sure the old p2p mode is properly uninitialized. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-7-verdre@v0yd.nl
2021-09-21mwifiex: Update virtual interface counters right after setting bss_typeJonas Dreßler
In mwifiex_init_new_priv_params() we update our private driver state to reflect the currently selected virtual interface type. Most notably we set the bss_mode to the mode we're going to put the firmware in. Now after we updated the driver state we actually start talking to the firmware and instruct it to set up the new mode. Those commands can and will sometimes fail, in which case we return with an error from mwifiex_change_vif_to_*. We currently update our virtual interface type counters after this return, which means the code is never reached when a firmware error happens and we never update the counters. Since we have updated our bss_mode earlier though, the counters now no longer reflect the actual state of the driver. This will break things on the next virtual interface change, because the virtual interface type we're switching away from didn't get its counter incremented, and we end up decrementing a 0-counter. To fix this, simply update the virtual interface type counters right after updating our driver structures, so that they are always in sync. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-6-verdre@v0yd.nl
2021-09-21mwifiex: Use helper function for counting interface typesJonas Dreßler
Use a small helper function to increment and decrement the counter of the interface types we currently manage. This makes the code that actually changes and sets up the interface type a bit less messy and also helps avoiding mistakes in case someone increments/decrements a counter wrongly. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-5-verdre@v0yd.nl
2021-09-21mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-typeJonas Dreßler
We currently handle changing from the P2P to the STATION virtual interface type slightly different than changing from P2P to ADHOC: When changing to STATION, we don't send the SET_BSS_MODE command. We do send that command on all other type-changes though, and it probably makes sense to send the command since after all we just changed our BSS_MODE. Looking at prior changes to this part of the code, it seems that this is simply a leftover from old refactorings. Since sending the SET_BSS_MODE command is the only difference between mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and STATION interface type. This does not fix any particular bug and just "looked right", so there's a small chance it might be a regression. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-4-verdre@v0yd.nl
2021-09-21mwifiex: Use function to check whether interface type change is allowedJonas Dreßler
Instead of bailing out in the function which is supposed to do the type change, detect invalid changes beforehand using a generic function and return an error if the change is not allowed. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-3-verdre@v0yd.nl
2021-09-21mwifiex: Small cleanup for handling virtual interface type changesJonas Dreßler
Handle the obvious invalid virtual interface type changes with a general check instead of looking at the individual change. For type changes from P2P_CLIENT to P2P_GO and the other way round, this changes the behavior slightly: We now still do nothing, but return -EOPNOTSUPP instead of 0. Now that behavior was incorrect before and still is, because type changes between these two types are actually possible and supported, which we'll fix in a following commit. Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914195909.36035-2-verdre@v0yd.nl
2021-08-29mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devicesTsuchiya Yuto
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
2021-08-29mwifiex: pcie: add DMI-based quirk implementation for Surface devicesJonas Dreßler
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
2021-08-21mwifiex: make arrays static const, makes object smallerColin Ian King
Don't populate the arrays wpa_oui and wps_oui on the stack but instead them static const. Makes the object code smaller by 63 bytes: Before: text data bss dec hex filename 29453 5451 64 34968 8898 .../wireless/marvell/mwifiex/sta_ioctl.o After: text data bss dec hex filename 29356 5611 64 35031 88d7 ../wireless/marvell/mwifiex/sta_ioctl.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819121651.7566-1-colin.king@canonical.com
2021-08-21mwifiex: usb: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210809211134.GA22488@embeddedor
2021-08-21mwifiex: drop redundant null-pointer check in mwifiex_dnld_cmd_to_fw()Tuo Li
There is no case in which the variable cmd_node->cmd_skb has no ->data, and thus the variable host_cmd is guaranteed to be not NULL. Therefore, the null-pointer check is redundant and can be dropped. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804020305.29812-1-islituo@gmail.com
2021-07-02Merge tag 'asm-generic-unaligned-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-22mwifiex: Avoid memset() over-write of WEP key_materialKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring array fields. When preparing to call mwifiex_set_keyparamset_wep(), key_material is treated very differently from its structure layout (which has only a single struct mwifiex_ie_type_key_param_set). Instead, add a new type to the union so memset() can correctly reason about the size of the structure. Note that the union ("params", 196 bytes) containing key_material was not large enough to hold the target of this memset(): sizeof(struct mwifiex_ie_type_key_param_set) == 60, NUM_WEP_KEYS = 4, so 240 bytes, or 44 bytes past the end of "params". The good news is that it appears that the command buffer, as allocated, is 2048 bytes (MWIFIEX_SIZE_OF_CMD_BUFFER), so no neighboring memory appears to be getting clobbered. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210617171522.3410951-1-keescook@chromium.org
2021-06-11mwifiex: bring down link before deleting interfaceBrian Norris
We can deadlock when rmmod'ing the driver or going through firmware reset, because the cfg80211_unregister_wdev() has to bring down the link for us, ... which then grab the same wiphy lock. nl80211_del_interface() already handles a very similar case, with a nice description: /* * We hold RTNL, so this is safe, without RTNL opencount cannot * reach 0, and thus the rdev cannot be deleted. * * We need to do it for the dev_close(), since that will call * the netdev notifiers, and we need to acquire the mutex there * but don't know if we get there from here or from some other * place (e.g. "ip link set ... down"). */ mutex_unlock(&rdev->wiphy.mtx); ... Do similarly for mwifiex teardown, by ensuring we bring the link down first. Sample deadlock trace: [ 247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds. [ 247.110630] Not tainted 5.12.4 #5 [ 247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.124557] task:rmmod state:D stack: 0 pid: 2119 ppid: 2114 flags:0x00400208 [ 247.133905] Call trace: [ 247.136644] __switch_to+0x130/0x170 [ 247.140643] __schedule+0x714/0xa0c [ 247.144548] schedule_preempt_disabled+0x88/0xf4 [ 247.149714] __mutex_lock_common+0x43c/0x750 [ 247.154496] mutex_lock_nested+0x5c/0x68 [ 247.158884] cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211] [ 247.165769] raw_notifier_call_chain+0x4c/0x78 [ 247.170742] call_netdevice_notifiers_info+0x68/0xa4 [ 247.176305] __dev_close_many+0x7c/0x138 [ 247.180693] dev_close_many+0x7c/0x10c [ 247.184893] unregister_netdevice_many+0xfc/0x654 [ 247.190158] unregister_netdevice_queue+0xb4/0xe0 [ 247.195424] _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211] [ 247.201816] cfg80211_unregister_wdev+0x20/0x2c [cfg80211] [ 247.208016] mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex] [ 247.214174] mwifiex_uninit_sw+0x158/0x1b0 [mwifiex] [ 247.219747] mwifiex_remove_card+0x38/0xa0 [mwifiex] [ 247.225316] mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie] [ 247.231451] pci_device_remove+0x50/0xe0 [ 247.235849] device_release_driver_internal+0x110/0x1b0 [ 247.241701] driver_detach+0x5c/0x9c [ 247.245704] bus_remove_driver+0x84/0xb8 [ 247.250095] driver_unregister+0x3c/0x60 [ 247.254486] pci_unregister_driver+0x2c/0x90 [ 247.259267] cleanup_module+0x18/0xcdc [mwifiex_pcie] Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-wireless/98392296-40ee-6300-369c-32e16cff3725@gmail.com/ Link: https://lore.kernel.org/linux-wireless/ab4d00ce52f32bd8e45ad0448a44737e@bewaar.me/ Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: dave@bewaar.me Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Dave Olsthoorn <dave@bewaar.me> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210515024227.2159311-1-briannorris@chromium.org
2021-05-17mwifiex: re-fix for unaligned accessesArnd Bergmann
A patch from 2017 changed some accesses to DMA memory to use get_unaligned_le32() and similar interfaces, to avoid problems with doing unaligned accesson uncached memory. However, the change in the mwifiex_pcie_alloc_sleep_cookie_buf() function ended up changing the size of the access instead, as it operates on a pointer to u8. Change this function back to actually access the entire 32 bits. Note that the pointer is aligned by definition because it came from dma_alloc_coherent(). Fixes: 92c70a958b0b ("mwifiex: fix for unaligned reads") Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-17mwifiex: Remove unneeded variable: "ret"zuoqilin
Remove unneeded variable: "ret" Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210317063353.1055-1-zuoqilin1@163.com
2021-04-17mwifiex: don't print SSID to logsBrian Norris
There are a few reasons not to dump SSIDs as-is in kernel logs: 1) they're not guaranteed to be any particular text encoding (UTF-8, ASCII, ...) in general 2) it's somewhat redundant; the BSSID should be enough to uniquely identify the AP/STA to which we're connecting 3) BSSIDs have an easily-recognized format, whereas SSIDs do not (they are free-form) 4) other common drivers (e.g., everything based on mac80211) get along just fine by only including BSSIDs when logging state transitions Additional notes on reason #3: this is important for the privacy-conscious, especially when providing tools that convey kernel logs on behalf of a user -- e.g., when reporting bugs. So for example, it's easy to automatically filter logs for MAC addresses, but it's much harder to filter SSIDs out of unstructured text. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225024454.4106485-1-briannorris@chromium.org
2021-02-08mwifiex: Report connected BSS with cfg80211_connect_bss()Yen-lin Lai
When a network is moved or reconfigured on the different channel, there can be multiple BSSes with the same BSSID and SSID in scan result before the old one expires. Then, it can cause cfg80211_connect_result to map current_bss to a bss with the wrong channel. Let mwifiex_cfg80211_assoc return the selected BSS and then the caller can report it cfg80211_connect_bss. Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210201070649.1667209-1-yenlinlai@chromium.org
2021-02-06Merge tag 'wireless-drivers-next-2021-02-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-14mwifiex: pcie: Drop bogus __refdata annotationGeert Uytterhoeven
As the Marvell PCIE WiFi-Ex driver does not have any code or data located in initmem, there is no need to annotate the mwifiex_pcie structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211133835.2970384-1-geert+renesas@glider.be
2020-12-08mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_startZhang Xiaohui
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
generated by cgit (git 2.34.1) at 2025-04-26 01:41:42 +0000