summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
AgeCommit message (Collapse)Author
2021-10-20mt76: disable BH around napi_schedule() callsFelix Fietkau
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-15mt76: mt76x0e: fix device hang during suspend/resumeLorenzo Bianconi
Similar to usb device, re-initialize mt76x0e device after resume in order to fix mt7630e hang during suspend/resume Reported-by: Luca Trombin <luca.trombin@gmail.com> Fixes: c2a4d9fbabfb9 ("mt76x0: inital split between pci and usb") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/4812f9611624b34053c1592fd9c175b67d4ffcb4.1620406022.git.lorenzo@kernel.org
2021-04-11mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open codedRyder Lee
Use PCI standard defines. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-01-26mt76: move mac_work in mt76_core moduleLorenzo Bianconi
Move mac_work delayed_work and mac_work_count in mt76_phy since it is used by all drivers. This is a preliminary patch to create a common mcu library used by mt7615 and mt7921 drivers Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix memory leak if device probing failsLorenzo Bianconi
Run mt76_free_device instead of ieee80211_free_hw if device probing fails in order to remove the already allocated mt76 workqueue Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code") Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: set interrupt mask register to 0 before requesting irqFelix Fietkau
Avoids spurious interrupts in case the hardware was running already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x0: pci: add mt7610 PCI IDPawel Dembicki
Add mt7610 PCI id found on D-Link DWR-960 to pci_device_id table. Run-tested on D-Link DWR-960 with no-name half-size mPCIE card with mt7610e. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move mt76_get_antenna in mt76_core moduleLorenzo Bianconi
Move mt76_get_antenna in mac80211.c in order to be reused by all drivers. Initialize .get_antenna function pointer for mt76x0, mt7603, mt7615 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20Revert "mt76: mt76x0e: don't use hw encryption for MT7630E"Stanislaw Gruszka
This reverts commit 34b0e9b767bfa09ae233ca0d6ceb299bf2e24600. Since commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") is no longer necessary to disable HW encryption for MT7630E. Disabling HW encryption helped previously because somehow fragmented skb's are not created if mac80211 encrypt frames, so buffer unmap bug of non-linear skbs was not triggered. Now since this bug is properly fixed by commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") , we can enable HW encryption back. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau
Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_resetFelix Fietkau
Reduces code duplication and adds missing bits for USB variants Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: track rx airtime for airtime fairness and surveyFelix Fietkau
Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4Felix Fietkau
This reduces the struct size and is useful for adding more flags later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi
Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-03mt76: mt76x0e: don't use hw encryption for MT7630EStanislaw Gruszka
Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") I can observe firmware hangs on MT7630E on station mode: tx stop functioning after minor activity (rx keep working) and on module unload device fail to stop with messages: [ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop Loading module again results in failure to associate with AP. Only machine power off / power on cycle can make device work again. It's unclear why commit 41634aa8d6db causes the problem, but it is related to HW encryption. Since issue is a firmware hang, that is super hard to debug, just disable HW encryption as fix for the issue. Fixes: 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: remove bogus mutex usageStanislaw Gruszka
mac80211 .start(), .stop() callbacks are never called concurrently with other callbacks. The only concurencly is with mt76 works which we cancel on stop() and schedule on start(). This fixes possible deadlock on cancel_delayed_work_sync(&dev->mac_work) as mac_work also take mutex. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mac_work in mt76_devLorenzo Bianconi
Move mac_work delayed work in mt76_dev data structure since it is used by all drivers and it will be reused adding mac work to mt7615 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_free_device routineLorenzo Bianconi
Move mt76_tx_free in mt76_free_device routine in order to unmap all txwi descriptors at module unload Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: unify set_timStanislaw Gruszka
All mt76 drivers (now also USB drivers) require empty .set_tim callback. Add it to common mt76 module and use on all drivers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skbLorenzo Bianconi
Introduce tx_aligned4_skbs in mt76_driver_ops and move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary patch in order to unify tx dma mapping for mt76x02 and new chipsets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x0: remove mt76x0u_alloc_device routineLorenzo Bianconi
Remove mt76x0u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x0u_probe and in mt76x0e_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: run MAC work every 100msFelix Fietkau
ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-17mt76: move mt76x02_get_txpower to mt76 coreFelix Fietkau
It will be reused by mt7603 later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: add energy detect CCA support to mt76x{0,2}e driversLorenzo Bianconi
Ported from the reference driver. Should fix compliance with ETSI regulatories on preventing transmission while energy detect values are above the threshold. The code has been tested using an ath9k device running tx99 as noise generator Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76x0: pci: fix ACS supportLorenzo Bianconi
Fix Automatic Channel Selection (ACS) support in mt76x0e driver configuring properly MT_CH_TIME_CFG register Fixes: 6250318694ca ("mt76x0: pci: add get_survey support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: replace sta_add/remove ops with common sta_state functionFelix Fietkau
Allows adding unassociated stations from mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
2018-11-30mt76: move mt76x02_bss_info_changed in mt76x02-lib moduleLorenzo Bianconi
Unify drv_bss_info_changed mac80211 callback and remove duplicated code in mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move tx protection routines in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_set_rts_threshold and mt76x02_mac_set_tx_protection routines in mt76x02-lib module and remove duplicated code in mt76x0 and mt76x2 drivers. Remove pci_mac.c and mt76x0/mac.c since now are empty files Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_set_tx_ackto in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_set_tx_ackto and mt76x02_set_coverage_class routines in mt76x02-lib module in order to be reused by mt76x0 driver. This is a preliminary patch to unify drv_bss_info_changed mac80211 callback between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: enable AP supportLorenzo Bianconi
Add missing mac80211 callbacks to mt76x0e_ops data structure and add mt76x02_beacon utility routines in mt76x0_bss_info_changed in order to enable/disable beacon transmission Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_sta_ps in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_sta_ps utility routine in mt76x02_util.c in order to be reused by mt76x0 driver adding AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_get_txpower in mt76x02_util.cLorenzo Bianconi
Move mt76x02_get_txpower utility routine in mt76x02-lib module in order to be reused by mt76x0 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_sw_scan and mt76x02_sw_scan_complete utility routines in mt76x02_util.c in order to be reused by mt76x0 and mt76x2u drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add pre_tbtt_tasklet supportLorenzo Bianconi
Enable/disable pre_tbtt_tasklet in mt76x0 driver in order to add AP support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add missing MODULE_FIRMWARE macroLorenzo Bianconi
Add missing firmware declaration for mt76x0e driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add get_survey supportLorenzo Bianconi
Move mt76x02_update_channel routine in mt76x02-lib module in order to be reused by mt76x0 driver adding get_survey support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: introduce mt76x0_phy_calirate routineLorenzo Bianconi
Add mt76x0_phy_calirate routine in order to perform phy calibration for mt76x0e devices. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: mt76x0e: another fix for the external PA current settingFelix Fietkau
- Use the register number define instead of a magic value - Fix inverted bit test (override needs to be applied if the bit is not set) Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: fix set external PA I/O currentYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/pci.c: In function 'mt76x0e_register_device': drivers/net/wireless/mediatek/mt76/mt76x0/pci.c:107:8: warning: variable 'data' set but not used [-Wunused-but-set-variable] It seems correct value to write is 'data' Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add mt76x0_register_device in mt76x0e_register_deviceLorenzo Bianconi
Run mt76x0_register_device routine in mt76x0e_register_device in order to register the device to the mac80211 layer. Moreover init mt76_driver_ops data structure and register interrupt line Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add missing mac80211 callbacksLorenzo Bianconi
Add missing mac80211 callbacks in mt76x0e_ops data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-04-21 21:51:18 +0000