summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
AgeCommit message (Collapse)Author
2019-05-01mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_completeLorenzo Bianconi
Do not enable/disable pre_tbtt_tasklet tasklet in mt76x02_sw_scan/mt76x02_sw_scan_complete since it is already done setting the operating channel. Do run tbtt_tasklet while the device is offchannel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move beacon_mask in mt76_devLorenzo Bianconi
Move beacon_mask in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move beacon_int in mt76_devLorenzo Bianconi
Move beacon_int in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: add skb pointer to mt76_tx_infoLorenzo Bianconi
Pass skb pointer to tx_prepare_skb through mt76_tx_info data structure. This is a preliminary patch to properly support dma error path for new chipsets (e.g. 7615) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: make beacon slots bigger for USBStanislaw Gruszka
Since we sent PS buffered frames via beacon memory we need to make beacon slots bigger. That imply we will also need to decrease number of slots as beacon SRAM memory is limited to 8kB. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02u: implement pre TBTT work for USBStanislaw Gruszka
Program beacons data and PS buffered frames on TBTT work for USB. We do not have MT_TXQ_PSD queue available via USB endpoints. The way we can send PS broadcast frames in timely manner before PS stations go sleep again is program them in beacon data area. Hardware do not modify those frames since TXWI is properly configured. mt76x02_mac_set_beacon() already handle this and free no longer used frames. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02u: implement beacon_opsStanislaw Gruszka
Add implementation of beacon_ops for USB and exit function to stop the timer if running when device is removed. Still no actual work on pre tbtt event. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce beacon_opsStanislaw Gruszka
Enabling/disableing TBTT and beacon will be diffrent for USB. Introduce beacon_ops to encapsulate that and implement it for MMIO. USB implementation is noop for now. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: add hrtimer for pre TBTT for USBStanislaw Gruszka
Add timer and work for pre TBTT for USB devices. For now code doesn't do anyting useful, just add hrtimer which synchronize with hardware MT_TBTT_TIMER. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_tx_info data structureLorenzo Bianconi
Add mt76_tx_info as auxiliary data structure to pass values to tx_prepare_skb pointer. This is a preliminary patch to add support for new chipsets (e.g. mt7615) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move mt76x02_insert_hdr_pad in mt76-core moduleLorenzo Bianconi
Move mt76x02_insert_hdr_pad in m76-core and rename it in mt76_insert_hdr_pad in order to be used in mt76_dma_tx_queue_skb. This is a preliminary patch in order to properly support tx dma mapping for new chipsets (e.g. mt7615) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_sw_queue data structureLorenzo Bianconi
Introduce mt76_sw_queue data structure in order to support new chipsets (e.g. mt7615) that have a shared hardware queue for all traffic identifiers. mt76_sw_queue will be used to track outstanding packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: remove mt76_queue dependency from tx_complete_skb function pointerLorenzo Bianconi
Remove mt76_queue dependency from tx_complete_skb function pointer and rely on mt76_tx_qid instead. Remove flush from tx_complete_skb signature. This is a preliminary patch to introduce mt76_sw_queue support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: remove mt76_queue dependency from tx_prepare_skb function pointerLorenzo Bianconi
Remove mt76_queue dependency from tx_prepare_skb function pointer and rely on mt76_tx_qid instead. This is a preliminary patch to introduce mt76_sw_queue support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76x02: fix hdr pointer in write txwi for USBStanislaw Gruszka
Since we add txwi at the begining of skb->data, it no longer point to ieee80211_hdr. This breaks settings TS bit for probe response and beacons. Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76x02u: remove bogus check and comment paddingStanislaw Gruszka
In mt76x02u_skb_dma_info() pad is always non-zero. Patch removes bogus check and add comments to the function. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-17mt76: fix tx status reporting for non-probing framesFelix Fietkau
On MT76x2, the hardware does not report tx status in the FIFO register, if the packet id is 0. Change the allocation of packet IDs to use 0 for no-ack packets, 1 for non-probing packets and 2-255 for packets with tx status requested. Fixes rate control issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: add support for reporting tx status with skbFelix Fietkau
MT76x2/MT76x0 has somewhat unreliable tx status reporting, and for that reason the driver currently does not report per-skb tx ack status at all. This breaks things like client idle polling, which relies on the tx ack status of a transmitted nullfunc frame. This patch adds code to report skb-attached tx status if requested by mac80211 or the rate control module. Since tx status is polled from a simple FIFO register, the code needs to account for the possibility of tx status events getting lost. The code keeps a list of skbs for which tx status is required and passes them to mac80211 once tx status has been filled in and the DMA queue is done with it. If a tx status event is not received after one second, the status rates are cleared, and a succesful ACK is indicated to avoid spurious disassoc during assoc or client polling. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: reserve enough room for USB tx skbsStanislaw Gruszka
Reserve enough room for USB skb, so we don not need to check the room every time we send frame. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mac.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.cLorenzo Bianconi
Move mt76x02u_tx_complete_skb and mt76x02u_remove_dma_hdr since they are used just by usb code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: rename mt76x02_util.h in mt76x02.hLorenzo Bianconi
Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: usb: use mt76x02u_tx_prepare_skb to fill txwiLorenzo Bianconi
Use mt76x02u_tx_prepare_skb routine to fill txwi in mt76x2u and mt76x0u driver and remove duplicated code. Moreover add static qualifier to mt76x02_mac_tx_rate_val and mt76x02_mac_fill_txwi routines Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: use skb_pad() instead of __skb_pad()Hauke Mehrtens
mt76 uses __skb_pad() with free_on_error set to true, this is the same as calling skb_pad(). This patch does not change any functionality, but it makes it easier to backport this driver in backports, because skb_pad() is also available in older kernel versions. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.hLorenzo Bianconi
Introduce mt76x02_dma.h header file to contain mt76x02 dma related definitions Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-19mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.cLorenzo Bianconi
Move mt76u_skb_dma_info routine in mt76x02-usb module and rename it in mt76x02u_skb_dma_info. Moreover move mt76x02u_set_txinfo in mt76x02_usb_core.c. This is a preliminary patch to move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in mt76x02-lib module since other chipsets (e.g. mt7603) use different dma definitions Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2024-07-06 00:20:59 +0000