Age | Commit message (Collapse) | Author |
|
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the MediaTek mt76 drivers.
Here is a sorted list of descriptions. It might make the reviewing
process easier.
MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver");
MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver");
MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers");
MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers");
MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x02 helpers");
MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers");
MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers");
MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers");
MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers");
MODULE_DESCRIPTION("MediaTek MT76x helpers");
MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers");
MODULE_DESCRIPTION("MediaTek MT76x USB helpers");
MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers");
MODULE_DESCRIPTION("MediaTek MT7921 core driver");
MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7925 core driver");
MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver");
MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver");
MODULE_DESCRIPTION("MediaTek MT792x core driver");
MODULE_DESCRIPTION("MediaTek MT792x USB helpers");
MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers");
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
|
|
A mouse that uses a USB connection is called a "USB mouse" device (or
"USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi
adapter that connects to the host computer via USB is a "USB wireless"
device, not a "wireless USB" device. (The latter term more properly
refers to a defunct Wireless USB specification, which described a
technology for sending USB protocol messages over an ultra wideband
radio link.)
Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a
"PCIe wireless" device, not a "wireless PCIe" device.
Rephrase the text in the kernel source where the word ordering is
wrong.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
|
|
Run mt76x02_set_ethtool_fwver utility routine in mt76x0u_load_firmware()
in order to report firmware version through ethtool
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
After 'commit ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct
mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for
vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}.
Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine.
Fixes: ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct mt76x02_rate_power")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
tx_rate can't be greater than 3 in mt76x0_phy_get_target_power routine
for cck rates. Get rid of dead code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
- remove stbc, because mt76x0 doesn't support it and mt76x2 uses the same
values as HT/VHT
- reduce vht array to 2 elements, because VHT MCS0-7 are the same as HT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Its layout and code is mt76x02 specific
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops
into mt7615 module in order to allow specifying driver specific
parameter.
This is a preliminary patch to add usb support to mt7921 driver.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Appears to have incorrectly offset 0x120 + 0x12 instead of 12 decimal,
leading to bogus power values being used.
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq
handling, so it must not be called in a pure process context with BH enabled.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
BIT(0) in MT_EE_NIC_CONF_1 is use to notify the driver if the radio RF
switch is controlled through a gpio. Use dev_debug instead of dev_err
to log this info.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Similar to usb device, re-initialize mt76x0e device after resume in order
to fix mt7630e hang during suspend/resume
Reported-by: Luca Trombin <luca.trombin@gmail.com>
Fixes: c2a4d9fbabfb9 ("mt76x0: inital split between pci and usb")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4812f9611624b34053c1592fd9c175b67d4ffcb4.1620406022.git.lorenzo@kernel.org
|
|
There are two variants of TP-Link Archer T2UHP V1, which are US and UN:
https://www.tp-link.com/us/support/download/archer-t2uhp/
https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/
From the driver source code provided by the vendor:
https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver
eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c
45: {USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */
46: {USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */
47: {USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */
eric@eric-VirtualBox:~/src$ lsusb -d 2357:
Bus 001 Device 003: ID 2357:010b TP-Link WiFi
eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u
eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id"
[snip]
eric@eric-VirtualBox:~/src$ ifconfig -a
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 08:00:27:74:d9:ee txqueuelen 1000 (Ethernet)
RX packets 78 bytes 16146 (16.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 75 bytes 8413 (8.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 56 bytes 5496 (5.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 56 bytes 5496 (5.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.106 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::21c7:2d90:e47d:ee48 prefixlen 64 scopeid 0x20<link>
ether 18:d6:c7:1b:6e:3e txqueuelen 1000 (Ethernet)
RX packets 37 bytes 5345 (5.3 KB)
RX errors 0 dropped 7 overruns 0 frame 0
TX packets 77 bytes 10513 (10.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eric@eric-VirtualBox:~/src$ dmesg | tail -n 30
12:51:25.551584 main Log opened 2021-03-01T12:51:25.551572000Z
[ 46.855763] 12:51:25.551995 main OS Product: Linux
[ 46.855838] 12:51:25.552075 main OS Release: 5.4.0-66-generic
[ 46.855897] 12:51:25.552150 main OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021
[ 46.855971] 12:51:25.552207 main Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService
12:51:25.552208 main Process ID: 898
12:51:25.552209 main Package type: LINUX_64BITS_GENERIC
[ 46.858699] 12:51:25.554921 main 6.1.16 r140961 started. Verbose level = 0
[ 46.863116] 12:51:25.559319 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[ 140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00
[ 140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 140.838283] usb 1-2: Product: WiFi
[ 140.838284] usb 1-2: Manufacturer: MediaTek
[ 140.838285] usb 1-2: SerialNumber: 1.0
[ 178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 178.417507] usbcore: registered new interface driver mt76x0u
[ 178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[ 178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000
[ 180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04
[ 181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0
[ 188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c
[ 189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3)
[ 189.618282] wlx18d6c71b6e3e: authenticated
[ 189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3)
[ 189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8)
[ 189.734720] wlx18d6c71b6e3e: associated
[ 190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready
Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use PCI standard defines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mac_work delayed_work and mac_work_count in mt76_phy since it is
used by all drivers. This is a preliminary patch to create a common mcu
library used by mt7615 and mt7921 drivers
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch to properly support mt7915 dbdc
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch to move properly support mt7915 dbdc
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In order to improve parallelism, convert rx path in mt76-usb module to
mt76 workers APIs
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Run mt76_free_device instead of ieee80211_free_hw if device probing
fails in order to remove the already allocated mt76 workqueue
Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code")
Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not free skb inside that function
Preparation for further cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Taking the same approach as initvals_phy.h.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:218:35: warning: ‘mt76x0_dcoc_tab’ defined but not used [-Wunused-const-variable=]
218 | static const struct mt76_reg_pair mt76x0_dcoc_tab[] = {
| ^~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:86:35: warning: ‘mt76x0_bbp_init_tab’ defined but not used [-Wunused-const-variable=]
86 | static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:48:35: warning: ‘mt76x0_mac_reg_table’ defined but not used [-Wunused-const-variable=]
48 | static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:14:35: warning: ‘common_mac_reg_table’ defined but not used [-Wunused-const-variable=]
14 | static const struct mt76_reg_pair common_mac_reg_table[] = {
| ^~~~~~~~~~~~~~~~~~~~
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive and
kept short via AQL, sched_set_fifo_low is used to keep worker priority above
normal tasks
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoids spurious interrupts in case the hardware was running already
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mt76 workqueue from usb to common code in order to be reused adding
low-power support for mt7663 chipset
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MCS8 and MCS9 for mt76x0{u,e} devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add mt7610 PCI id found on D-Link DWR-960 to pci_device_id table.
Run-tested on D-Link DWR-960 with no-name half-size mPCIE card
with mt7610e.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If a MCU timeout occurs before a hw restart completes, another hw restart
is scheduled, and the station state gets corrupted.
To speed up dealing with that, do not issue any MCU commands after the first
timeout, and defer handling timeouts until the reset has completed.
Also ignore errors in MCU commands during start/config to avoid making user
space fail on this condition. If it happens, another restart is scheduled
quickly, and that usually recovers the hardware properly.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c: In function mt76x0_phy_rf_init:
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c:1158:5: warning: variable val set but not used [-Wunused-but-set-variable]
Fixes: 10de7a8b4ab9 ("mt76x0: phy files")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use sta_pre_rcu_remove callback to clear wcid pointer earlier
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce extended utility routines to read/write data o usb bus. New
devices (e.g. mt7663u) will rely on both upper and lower part of the
register address. Add ext parameter to mt76u_init signature in order to
reuse the code adding mt7663u support.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mcu buffer allocation in mt76x2u/mt76x0u drivers since newer
chipsets (e.g. mt7663u) does not rely on synchronous mcu communication
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Starting from 'commit ee8040139ab1 ("mt76: do not overwrite
max_tx_fragments if it has been set")' we can avoid overwriting
max_tx_fragments for mt76x02u devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allow tracking clients of both wiphys separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Adds multiple wiphy support to mt76_get_txpower
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Nothing in the core uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allows keeping per-wiphy state separate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey
This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Current implementation always use default eeprom mac address to
configure device registers even if it is updated using
mt76_eeprom_override. Fix it initializing macaddr filed of mt76_dev data
structure with eeprom mac address and running mt76_eeprom_override
before mt76x02_mac_setaddr
Fixes: d1bc9bf2072c ("mt76: mt76x0: eeprom: add support for MAC address from OF")
Tested-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Move mt76_get_antenna in mac80211.c in order to be reused by all
drivers. Initialize .get_antenna function pointer for mt76x0, mt7603,
mt7615 and mt76x2u drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This reverts commit 34b0e9b767bfa09ae233ca0d6ceb299bf2e24600.
Since commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs")
is no longer necessary to disable HW encryption for MT7630E.
Disabling HW encryption helped previously because somehow fragmented
skb's are not created if mac80211 encrypt frames, so buffer unmap bug
of non-linear skbs was not triggered. Now since this bug is properly
fixed by commit 7bd0650be63c ("mt76: dma: fix buffer unmap with
non-linear skbs") , we can enable HW encryption back.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Convert mt76_is_mmio and mt76_is_usb to rely on mt76_dev instead of
mt76x02_dev since this is a property not strictly related to hw chipset
and it will be more reusable
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
rate controller and throughput are very sensitive to tx status timing.
In order to improve performances when the system is heavily loaded,
substitute stat_work delayed_work with a regular work_struct and create
a mt76u dedicated workqueue for tx status reporting
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
usb drivers are supposed to communicate using usb_interface instead
mt76x{0,2}u is now registering through usb_device. Fix it by passing
usb_intf device to mt76_alloc_device routine.
Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-By: Zero_Chaos <sidhayn@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since mt76x0 does not save the phy calibration data it is not necessary
to wait 350ms in mt76x0_phy_calibrate
Tested-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76x0e driver only supports MAC addresses from
calibration data eeprom. Many routers however do not
have a valid stock address set in this field.
This patch makes it possible to take a MAC address
from OF (e.g. from mtd).
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[adjusted for kernel submission]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|