summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
AgeCommit message (Collapse)Author
2020-02-14mt76: add multiple wiphy support to mt76_get_min_avg_rssiFelix Fietkau
Allow tracking clients of both wiphys separately Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower and antenna mask to struct mt76_phyFelix Fietkau
Adds multiple wiphy support to mt76_get_txpower Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower_conf back to driver specific structsFelix Fietkau
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move channel state to struct mt76_phyFelix Fietkau
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: fix tx power issuesFelix Fietkau
- tx power is stored in the channels after ieee80211_register_hw, so chan->orig_mpwr needs to be updated as well - for non-TSSI devices, mt76x2e needs to use a different target power value from the EEPROM - fix a rounding error in a few places (need to round up, not down) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76: mt76x2: fix 2.4 GHz channel gain settingsFelix Fietkau
AGC register 35, 37 override for the low gain setting should only be done on 5 GHz. Also, 2.4 GHz needs a different value for register 35 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-07mt76: mt76x2: fix external LNA gain settingsFelix Fietkau
Devices with external LNA need different values for AGC registers 8 and 9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-18mt76: mt76x2: avoid running DPD calibration if tx is blockedFelix Fietkau
Doing so could lead to hangs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-17mt76: move mt76x02_phy_get_min_avg_rssi to mt76 coreFelix Fietkau
This will be used by mt7603 as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76: remove wait argument from mt76x02_mcu_calibrateStanislaw Gruszka
We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used for do additional MT_MCU_COM_REG0 register operations, which are needed for mt76x2e devices and we can use appropriate check instead of wait argument. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x02: assure we update gain after scanStanislaw Gruszka
Assure that after we initialize dev->cal.low_gain to -1 this will cause update gain calibration. Otherwise this might or might not happen depending on value of second bit of low_gain and values read from registers in mt76x02_phy_adjust_vga_gain(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x0: pci: add DFS supportLorenzo Bianconi
Introduce dfs support in mt76x0e driver and unlock radar channels Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-30mt76x2u: align channel gain logic to mt76x2 oneLorenzo Bianconi
Update vga tuning algorithm to the one used in mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_band in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_band routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_bw in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x2: move mt76x2_dev in mt76x02_util.hLorenzo Bianconi
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev in order to be shared between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.cLorenzo Bianconi
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since it will be used by mt76x0 driver in order to unify rxwi parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-05mt76x2: move mt76x2 source files to mt76x2 folderLorenzo Bianconi
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-05-31 05:36:49 +0000