summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
AgeCommit message (Collapse)Author
2023-07-25wifi: mt76: mt7996: use correct phy for background radar eventStanleyYP Wang
If driver directly uses the band_idx reported from the radar event to access mt76_phy array, it will get the wrong phy for background radar. Fix this by adjusting the statement. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: connac: add support to set ifs time by mcu commandPeter Chiu
There's a race between driver and fw on some tx/rx control registers when setting ifs, which will cause accidental hw queue pause problems. Avoid this by setting ifs time with bss_info mcu command. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info commandPeter Chiu
The bmc_tx_wlan_idx should be the wlan_idx of the current bss rather than peer AP's wlan_idx, otherwise there will appear some frame decryption problems on station mode. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: connac: add support for dsp firmware downloadPeter Chiu
Add FW_START_WORKING_PDA_DSP for the indication of starting DSP firmware download, which is for phy-related control. The firmware is transparent to the driver, but it's necessary for the firmware download process. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add full system reset knobs into debugfsRyder Lee
Add testing points into debugfs to trigger firmware assert and enable full system recovery. Also rename knob "fw_ser" to a clear-cut name "sys_recovery". Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: enable p2p supportSean Wang
Introduce p2p-go/p2p-client support to mt7921 driver CONNECTION_P2P_GC/GO is not supported with the current firmware so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go respectively to make it work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_set_pm()Peter Chiu
Currently using BSS_INFO_PS command will sometimes cause packet drop in hw rx queue. Temporarily remove this function until finding the cause. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix pointer calculation in ie countdown eventPeter Chiu
Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not include the length of general rxd. It only includes the length of firmware event rxd. Use skb->length to get the correct length. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()Ryder Lee
Those capabilities have been added into ieee80211_bss_conf. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: Remove unneeded semicolonYang Li
./drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3136:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4059 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add EHT beamforming supportMeiChia Chiu
Add mt7996_mcu_sta_bfer_eht() and related capability checks. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: enable EHT support in firmwareShayne Chen
Add sta_rec_eht command and extend phymode setting. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add variants supportShayne Chen
There are variants of mt7996 which are different from eht supported and wtbl size limit. Get the hw caps with CHIP_CONFIG command. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: avoid mcu_restart function pointerLorenzo Bianconi
Run mt7996_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exitLorenzo Bianconi
Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: fix POWER_CTRL command name typoShayne Chen
Fix typo MCU_UNI_CMD_POWER_CREL to MCU_UNI_CMD_POWER_CTRL. Fixes: 779d34de055e ("wifi: mt76: connac: add more unified command IDs") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlvLorenzo Bianconi
Fix the following sparse warnings in mt7996_mcu_sta_he_tlv routine: warning: incorrect type in assignment (different base types) expected unsigned char got restricted __le16 [usertype] warning: incorrect type in assignment (different base types) expected unsigned char got restricted __le16 [usertype] Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7996: check return value before accessing free_block_numRyder Lee
Check return value of mt7996_mcu_get_eeprom_free_block() first before accessing free_block_num. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected()Ryder Lee
Coverity message: using tainted "r->band_idx" variable as an index into an array "(*dev).mt76.phys". Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527812 ("Insecure data handling") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown()Ryder Lee
Coverity message: using tainted "hdr->band" variable as an index into an array "(*dev).mt76.phys". Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527797 ("Insecure data handling") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add support to configure spatial reuse parameter setRyder Lee
The SPR parameter set comprises OBSS PD threshold for SRG and non SRG and Bitmap of BSS color and partial BSSID. This adds support to configure fields of SPR element to firmware. User can disable firmware SR algorithms by turning sr_scene_detect off. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devicesShayne Chen
The driver first supports Filogic 680 PCI device, which is a Wi-Fi 7 chipset supporting concurrent tri-band operation at 6 GHz, 5 GHz, and 2.4 GHz with 4x4 antennas on each band. Currently, mt7996 only supports tri-band HE or older mode. EHT mode and more variants of Filogic 680 support will be introduced in further patches. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-08-01 01:04:55 +0000