summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2021-12-23Merge tag 'wireless-drivers-next-2021-12-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 Third set of patches for v5.17, and the final one if all goes well. We have Specific Absorption Rate (SAR) support for both mt76 and rtw88. Also iwlwifi should be now W=1 warning free. But otherwise nothing really special this time, business as usual. Major changes: mt76 * Specific Absorption Rate (SAR) support * mt7921: new PCI ids * mt7921: 160 MHz channel support iwlwifi * fix W=1 and sparse warnings * BNJ hardware support * add new killer device ids * support for Time-Aware-SAR (TAS) from the BIOS * Optimized Connectivity Experience (OCE) scan support rtw88 * hardware scan * Specific Absorption Rate (SAR) support ath11k * qca6390/wcn6855: report signal and tx bitrate * qca6390: rfkill support * qca6390/wcn6855: regdb.bin support ath5k * switch to rate table based lookup wilc1000 * spi: reset/enable GPIO support * tag 'wireless-drivers-next-2021-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (148 commits) mt76: mt7921: fix a possible race enabling/disabling runtime-pm wilc1000: Document enable-gpios and reset-gpios properties wilc1000: Add reset/enable GPIO support to SPI driver wilc1000: Convert static "chipid" variable to device-local variable rtw89: 8852a: correct bit definition of dfs_en rtw88: don't consider deep PS mode when transmitting packet ath11k: Fix unexpected return buffer manager error for QCA6390 ath11k: add support of firmware logging for WCN6855 ath11k: Fix napi related hang ath10k: replace strlcpy with strscpy rtw88: support SAR via kernel common API rtw88: 8822c: add ieee80211_ops::hw_scan iwlwifi: mei: wait before mapping the shared area iwlwifi: mei: clear the ownership when the driver goes down iwlwifi: yoyo: fix issue with new DBGI_SRAM region read. iwlwifi: fw: fix some scan kernel-doc iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ iwlwifi: mvm: remove card state notification code iwlwifi: mvm: drop too short packets silently iwlwifi: mvm: fix AUX ROC removal ... ==================== Link: https://lore.kernel.org/r/20211223141108.78808C36AE9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-22codel: remove unnecessary pkt_sched.h includeJakub Kicinski
Commit d068ca2ae2e6 ("codel: split into multiple files") moved all Qdisc-related code to codel_qdisc.h, move the include of pkt_sched.h as well. This is similar to the previous commit, although we don't care as much about incremental builds after pkt_sched.h was touched itself it is included by net/sch_generic.h which is modified ~20 times a year. This decreases the incremental build size after touching pkt_sched.h from 1592 to 617 objects. Fix unmasked missing includes in WiFi drivers. Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221193941.3805147-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-22mt76: mt7921: fix a possible race enabling/disabling runtime-pmLorenzo Bianconi
Fix a possible race enabling/disabling runtime-pm between mt7921_pm_set() and mt7921_poll_rx() since mt7921_pm_wake_work() always schedules rx-napi callback and it will trigger mt7921_pm_power_save_work routine putting chip to in low-power state during mt7921_pm_set processing. Suggested-by: Deren Wu <deren.wu@mediatek.com> Tested-by: Deren Wu <deren.wu@mediatek.com> Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/0f3e075a2033dc05f09dab4059e5be8cbdccc239.1640094847.git.lorenzo@kernel.org
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-19mt76: mt7921s: fix cmd timeout in throughput testDeren Wu
During heavy loading throughtput test, the RX buffer (128) would be exhausted and some RX pkts dropped randomly. Increase buffer size from 128 to 512 (a safer length) to avoid tput degrade or cmd-timeout problem. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921s: fix suspend error with enlarging mcu timeout valueSean Wang
Fix the false positive suspend error that may occur on mt7921s with enlarging mcu timeout value. The reason why we have to enlarge mcu timeout from HZ / 3 to HZ is we should consider the additional overhead caused by running concurrently with btmtksdio (a MT7921 bluetooth SDIO driver) that would compete for the same SDIO bus in process context to complete the suspend procedure. Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921s: make pm->suspended usage consistentSean Wang
Update pm->suspended usage to be consistent with mt7921e driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: fix possible resume failureSean Wang
Fix the possible resume failure due to mt76_connac_mcu_set_hif_suspend timeout. That is because clearing the flag pm->suspended too early opened up a race window, where mt7921_poll_tx/rx scheduled a ps_work to put the device in doze mode, that is unexpected for the device is being resumed from the suspend state and would make the remaining MCU comamnds in resume handler failed to execute. Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: clear pm->suspended in mt7921_mac_reset_workSean Wang
clear pm->suspended in mt7921_mac_reset_work to allow pm runtime can be enabled after wifi reset in any circumstance. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlvLorenzo Bianconi
Rely on le16_add_cpu() in mt76_connac_mcu_add_nested_tlv routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: remove dead definitionsLorenzo Bianconi
to_wcid_lo and to_wcid_hi are no longer used in mt7921/mcu.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: add mu-mimo and ofdma debugfs knobsMeiChia Chiu
Add mu-mimo and ofdma packet counters statistics. The statistics are clear on read. Reviewed-by: Money Wang <Money.Wang@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: introduce mt76_vif in mt7915_vifLorenzo Bianconi
Align mt7915_vif layout to mt7921_vif and mt7615_vif Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: reduce log severity levels for informative messagesTzung-Bi Shih
"ASIC revision" and "Firmware init done" shouldn't be error messages. Reduces the severity levels. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: rely on mt76_connac definitionsLorenzo Bianconi
Remove duplicated mcu definitions in mt7915 mcu.h and reused connac ones. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: rely on MCU_CMD macroLorenzo Bianconi
Similar to mt7915 driver, rely on MCU_CMD macro and do not command definitions directly Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: introduce MCU_CE_CMD macroLorenzo Bianconi
Similar to MCU_EXT_CMD, introduce MCU_CE_CMD for CE commands Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: introduce MCU_UNI_CMD macroLorenzo Bianconi
Similar to MCU_EXT_CMD, introduce MCU_UNI_CMD for unified commands Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: remove MCU_FW_PREFIX bitLorenzo Bianconi
Get rid of MCU_FW_PREFIX bit since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: align MCU_EXT definitions with 7915 driverLorenzo Bianconi
Align MCU_EXT and MCU_FW definitions between mt76_connac and mt7915 driver. This is a preliminary patch to reuse mt76_connac in mt7915 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: introduce MCU_EXT macrosLorenzo Bianconi
Introduce MCU_EXT_CMD and MCU_EXT_QUERY macros in mt76_connac module. This is a preliminary patch to reuse mt76_connac module in mt7915 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: fix network buffer leak by txs missingDeren Wu
TXS in mt7921 may be forwared to tx_done event. Should try to catch TXS information in tx_done event as well. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: in debugfs queue stats, skip wmm index 3 on mt7663Felix Fietkau
The hardware only supports WMM index 0-2 and registers for index 3 return bogus data. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: process txfree and txstatus without allocating skbsFelix Fietkau
Reduces pressure on the memory allocator Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: allow drivers to drop rx packets earlyFelix Fietkau
This can be used to free received events without allocating an extra skb Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7663: disable 4addr capabilityLorenzo Bianconi
4addr is not supported by the offload firmware yet Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: clear mcu error interrupt status on mt7663Felix Fietkau
Should fix issues with error recovery Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdrRyder Lee
Get rid of unsafe access since mt76_insert_ccmp_hdr moves the header. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: move sar_capa configuration in common codeLorenzo Bianconi
Move wiphy SAR capability configuration in mt76 module and remove duplicated code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_bandLorenzo Bianconi
last_ch configuration must not be dependent on the current configured band but it is defined by hw capabilities since the fw always expects the following order: - 2GHz - 5GHz - 6GHz Fixes: 9b2ea8eee42a1 ("mt76: connac: set 6G phymode in single-sku support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921s: fix possible kernel crash due to invalid Rx countSean Wang
Return the proper error code when out-of-range the Rx aggregation count are reported from the hardware that would create the unreasonable extreme large Rx buffer. [ 100.873810] show_stack+0x20/0x2c [ 100.873823] dump_stack+0xc4/0x140 [ 100.873839] bad_page+0x110/0x114 [ 100.873854] check_new_pages+0xf8/0xfc [ 100.873869] rmqueue+0x5a0/0x640 [ 100.873884] get_page_from_freelist+0x124/0x20c [ 100.873898] __alloc_pages_nodemask+0x114/0x2a4 [ 100.873918] mt76s_rx_run_queue+0xd4/0x2e4 [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5] [ 100.873938] mt76s_rx_handler+0xd4/0x2a0 [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5] [ 100.873957] mt76s_txrx_worker+0xac/0x17c [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5] [ 100.873977] mt7921s_txrx_worker+0x5c/0xd8 [mt7921s d0bdbc018082dbc8dc1407614be3c2e7bd64423b] [ 100.874003] __mt76_worker_fn+0xe8/0x170 [mt76 b80af3483a8f9d48e916c12d8dbfaa0d3cd15337] [ 100.874018] kthread+0x148/0x3ac [ 100.874032] ret_from_fork+0x10/0x30 [ 100.874067] Kernel Offset: 0x1fe2000000 from 0xffffffc010000000 [ 100.874079] PHYS_OFFSET: 0xffffffe800000000 [ 100.874090] CPU features: 0x0240002,2188200c Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921s: fix bus hang with wrong privilegeDeren Wu
Accroding to chip hw flow, mt7921s need to re-acquire privilege again before normal running. Otherwise, the bus may be stuck in an abnormal status. Tested-by: Leon Yen <Leon.Yen@mediatek.com> Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: use correct iftype data on 6GHz cap initShayne Chen
Set 6GHz cap to iftype data which is matched to the type of current interface. Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: fix boolreturn.cocci warningChangcheng Deng
./drivers/net/wireless/mediatek/mt76/mt7921/sdio_mac.c: 223: 8-9: WARNING: return of 0/1 in function 'mt7921s_tx_status_data' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: eeprom: tolerate corrected bit-flipsDaniel Golle
mtd_read() returns -EUCLEAN in case of corrected bit-flips. As data was read, don't error out in this case. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7603: improve reliability of tx powersave filteringFelix Fietkau
Leave more time to abort transmissions (which could happen at low CCK rates) Only warn if the last filter command is stuck Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: clear sta powersave flag after notifying driverFelix Fietkau
If the driver has configured the hardware to drop packets for a sta that was in powersave mode, then clearing the flag too early opens up a small race window during which packets could be dropped on wakeup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt7915 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7603: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt7603 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: improve wmm index allocationFelix Fietkau
Typically all AP interfaces on a PHY will share the same WMM settings, while sta/mesh interfaces will usually inherit the settings from a remote device. In order minimize the likelihood of conflicting WMM settings, make all AP interfaces share one slot, and all non-AP interfaces another one. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: improve wmm index allocationFelix Fietkau
Typically all AP interfaces on a PHY will share the same WMM settings, while sta/mesh interfaces will usually inherit the settings from a remote device. In order minimize the likelihood of conflicting WMM settings, make all AP interfaces share one slot, and all non-AP interfaces another one. This also fixes running multiple AP interfaces on MT7613, which only has 3 WMM slots. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: fix unused tx antenna mask in testmodeShayne Chen
The mask variable is assigned but not used after testmode disabled: if (!en) mask = phy->mt76->chainmask; Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921s: fix the device cannot sleep deeply in suspendSean Wang
According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have to be last MCU command to execute in suspend handler and all data traffic have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL starts as well in order that mt7921 can successfully fall into the deep sleep mode. Where we reuse the flag MT76_STATE_SUSPEND and avoid creating another global flag to stop all of the traffic onto the SDIO bus. Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Reported-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: move mt76_connac_mcu_set_hif_suspend to bus-related filesSean Wang
This is a preliminary patch for the following patch ("mt76: mt7921s: fix the device cannot sleep deeply in suspend). mt76_connac_mcu_set_hif_suspend eventually would be handled in each bus-level suspend/resume handler in either mt7921/sdio.c or mt7921/pci.c depending on what type of the bus the device is running on. We can move mt76_connac_mcu_set_hif_suspend to bus-related files to simplify the logic. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: fix decap offload corner case with 4-addr VLAN framesFelix Fietkau
With 4-address mode VLAN frames, an internal header translation step fails, leaving behind an extra 2-byte length field that must be reomved by the driver. Add a check for this condition to fix receiving such packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7915: fix decap offload corner case with 4-addr VLAN framesFelix Fietkau
With 4-address mode VLAN frames, an internal header translation step fails, leaving behind an extra 2-byte length field that must be reomved by the driver. Add a check for this condition to fix receiving such packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt76x02: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt76x02 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: move sar utilities to mt76-core moduleLorenzo Bianconi
Move mt76_get_sar_power and mt76_init_sar_power in the common code. This is a preliminary patch to add sar support to mt76x02 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: honor mt76_connac_mcu_set_rate_txpower return value in ↵Lorenzo Bianconi
mt7921_config Check return code from mt76_connac_mcu_set_rate_txpower() in mt7921_config routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: fix the wiphy's available antennas to the correct valueBo Jiao
the wiphy's available antennas may be incorrect When ext phy's antenna_mask is different from main phy Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-03-25 14:19:53 +0000