summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2024-02-22wifi: mt76: Remove redundant assignment to variable tidnoColin Ian King
The variable tidno is being assigned a value that is not being read and is being re-assigned a new value a few statements later. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/net/wireless/mediatek/mt76/agg-rx.c:125:5: warning: Value stored to 'tidno' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177Ming Yen Hsieh
Because the number of channels to be configured is calculated using the %, and it results in 0 when there's an exact division, this leads to some channels not having their tx power configured. Fixes: 7801da338856 ("wifi: mt76: mt7921: enable set txpower for UNII-4") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921: fix suspend issue on MediaTek COB platformMichael Lo
MediaTek's controller driver on COB platform (e.g. MT8188) is capable of controlling power supplies and reset pin of a component (e.g. a WIFI chip) in power-on and power-off process. Due to this optional feature, mt76 need to inform controller that mt76 need to keep power during suspend. Otherwise WIFI will be powered off when system enters suspend process. The "wakeup-source" property was used for the device that need this to go into suspend mode so that mt76 suspend handler doesn't fail and the system is able to enter into a suspend state. An example: wifi: mt7921@0 { wifi0{ reg = <0x0000 0 0 0 0>; wakeup-source; }; }; Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921: fix a potential association failure upon resumingLeon Yen
In multi-channel scenarios, the granted channel must be aborted before suspending. Otherwise, the firmware will be put into a wrong state, resulting in an association failure after resuming. With this patch, the granted channel will be aborted before suspending if necessary. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspendMing Yen Hsieh
Before entering suspend, we need to ensure that all MCU command are completed. In some cases, such as with regd_notifier, there is a chance that CLC commands, will be executed before suspend. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792x: update the country list of EU for ACPI SARMing Yen Hsieh
This patch updates the EU country list to ensure the MTCL table works correctly. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel ↵Ming Yen Hsieh
config from ACPI In some case, the MTCL table will exist, but MTDS table will not. So the SAR will init fail. This patch make MTCL and MTDS can exist with no dependence. Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921: fix incorrect type conversion for CLC commandMing Yen Hsieh
clc->len is defined as 32 bits in length, so it must also be operated on with 32 bits, not 16 bits. Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/ Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925e: fix use-after-free in free_irq()Deren Wu
From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921e: fix use-after-free in free_irq()Deren Wu
From commit a304e1b82808 ("[PATCH] Debug shared irqs"), there is a test to make sure the shared irq handler should be able to handle the unexpected event after deregistration. For this case, let's apply MT76_REMOVED flag to indicate the device was removed and do not run into the resource access anymore. BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e] Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115 CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10 Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x1f/0x190 ? mt7921_irq_handler+0xd8/0x100 [mt7921e] ? mt7921_irq_handler+0xd8/0x100 [mt7921e] kasan_report.cold+0x7f/0x11b ? mt7921_irq_handler+0xd8/0x100 [mt7921e] mt7921_irq_handler+0xd8/0x100 [mt7921e] free_irq+0x627/0xaa0 devm_free_irq+0x94/0xd0 ? devm_request_any_context_irq+0x160/0x160 ? kobject_put+0x18d/0x4a0 mt7921_pci_remove+0x153/0x190 [mt7921e] pci_device_remove+0xa2/0x1d0 __device_release_driver+0x346/0x6e0 driver_detach+0x1ef/0x2c0 bus_remove_driver+0xe7/0x2d0 ? __check_object_size+0x57/0x310 pci_unregister_driver+0x26/0x250 __do_sys_delete_module+0x307/0x510 ? free_module+0x6a0/0x6a0 ? fpregs_assert_state_consistent+0x4b/0xb0 ? rcu_read_lock_sched_held+0x10/0x70 ? syscall_enter_from_user_mode+0x20/0x70 ? trace_hardirqs_on+0x1c/0x130 do_syscall_64+0x5c/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 ? do_syscall_64+0x68/0x80 ? trace_hardirqs_on_prepare+0x72/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CABXGCsOdvVwdLmSsC8TZ1jF0UOg_F_W3wqLECWX620PUkvNk=A@mail.gmail.com/ Fixes: 9270270d6219 ("wifi: mt76: mt7921: fix PCI DMA hang after reboot") Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792x: add the illegal value check for mtcl table of acpiMing Yen Hsieh
The mtcl table provided regulatory information for 5.9/6Ghz channels and configured by platform venders. So, sometimes vendors may write illegal values, and therefore it is necessary to check and add corresponding handling for such cases. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix the wrong data type for scan commandMing Yen Hsieh
For the member of 'struct scan_req_tlv', replace data type of func_mask_ext from 'u8' to '__le32'. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: set page_pool napi pointer for mmio devicesLorenzo Bianconi
In order to recycle skbs in the page_pool "hot" cache in napi_pp_put_page routine, set napi pointer for MMIO devices in mt76_create_page_pool(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: move wed common utilities in wed.cLorenzo Bianconi
Introduce wed.c in order to collect mt76 wed common codebase used by mt7915 and mt7996 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792x: fix ethtool warningGen Xu
Add a missing EHT related field to fix the following ethtool warning: [98179.287352] mt7921e 0003:01:00.0: ei: 74 SSTATS_LEN: 73 Fixes: c74df1c067f2 ("wifi: mt76: mt792x: introduce mt792x-lib module") Signed-off-by: Gen Xu <genxu6@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix HIF_TXD_V2_1 valueBenjamin Lin
Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill TXD values for HW path. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: connac: set correct muar_idx for mt799x chipsetsShayne Chen
The MUAR (multicast unicast address) is an address mapping table that participates in the process of searching WTBL entries. For mt799x chipsets, the default muar index of BMC WTBL is 0xe. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: add locking for accessing mapped registersShayne Chen
A race condition was observed when accessing mapped registers, so add locking to protect against concurrent access. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: remove TXS queue settingPeter Chiu
DMA queue settings of TXS will be initialized by the firmware. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix efuse reading issueStanleyYP Wang
The efuse data starts from the 48th bytes instead of 64th bytes in the returned event skb. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: mark GCMP IGTK unsupportedMichael-CY Lee
Since the FW does not support to handle the integrity and validation of IGTK in GCMP mode, return -EOPNOTSUPP to let it be handled by upper layer. Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix HE beamformer phy cap for station vifHoward Hsu
Set correct beamformer capabilities for station vif in HE PHY capability IE. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: ensure 4-byte alignment for beacon commandsBenjamin Lin
If TLV includes beacon content, its length might not be 4-byte aligned. Make sure the length is aligned before sending beacon commands to FW. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS capsBenjamin Lin
The EHT MCS map subfield of 20 MHz-Only is not present in the EHT capability of AP, so STA does not need to parse the subfield. Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which can be confirmed by checking supported channel width in HE capability. Fixes: 92aa2da9fa49 ("wifi: mt76: mt7996: enable EHT support in firmware") Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: disable AMSDU for non-data framesPeter Chiu
Disable AMSDU for non-data frames to prevent TX token leak issues. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix TWT issuesPeter Chiu
This patch fixes the following TWT issues: - Change table_mask to u16 to support up to 16 TWT stations - Reject TWT flows for duplicated establishment - Fix possible unaligned pointer - Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag - The minimum TWT duration supported by mt7996 chipsets is 64. Reply with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64 Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: check txs format before getting skb by pidPeter Chiu
The PPDU TXS does not include the error bit so it cannot use to report status to mac80211. This patch fixes issue that STA wrongly detects if AP is still alive. Fixes: 2569ea5326e2 ("wifi: mt76: mt7996: enable PPDU-TxS to host") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: support temperature sensorDeren Wu
Allow sensors tool to read radio's temperature, example: mt7925_phy8-pci-3b00 Adapter: PCI adapter temp1: +35.0°C Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: update PCIe DMA settingsDeren Wu
Fix the wrong WFDMA settings to improve TX performance. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: add support to set ifs time by mcu commandMing Yen Hsieh
There's a race between driver and fw on some tx/rx control registers when setting ifs, which will cause accidental hw queue pause problems. Avoid this by setting ifs time with bss_info mcu command. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: add flow to avoid chip bt function failQuan Zhou
A sub-process of Wifi L0.5 reset will make chip common partition enter low power, and have chance lead to Bluetooth host-to-chip command timeout, modify the software flow according to the chip's design to solve the problem. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix the wrong header translation configMing Yen Hsieh
The header translation config should set to broadcast and unicast cases correctly, not only unicast case. And also remove the cmds of wtbl (wlan table) series, because these MCU commands have already been replaced by other commands in mt7925. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix WoW failed in encrypted modeMing Yen Hsieh
When in suspend mode, WoW (Wake-on-WLAN) fails to wake the system remotely due to incorrect encryption mode settings. For the new mt7925 chipset, the old STA_REC_KEY_V2 command will send incorrect parameters to the firmware. Therefore, STA_REC_KEY_V3 has been introduced as a replacement for it. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix fw download failMing Yen Hsieh
Add an address of fw region for fw download. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix wmm queue mappingMing Yen Hsieh
Firmware uses access class index (ACI) for wmm parameters update, so convert mac80211 queue to ACI in mt7925_conf_tx(). Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix mcu query command failHao Zhang
Apply query command type properly to make the chip send the response back. Otherwise, we may see the command timeout in driver side. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix SAP no beacon issue in 5Ghz and 6Ghz bandrong.yan
Driver should configure basic rate and phy mode for SAP mode. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: rong.yan <rong.yan@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7925: fix connect to 80211b mode fail in 2Ghz bandMing Yen Hsieh
Driver should setting correct phy mode to firmware when in legacy mode. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt76x2u: add netgear wdna3100v3 to device tableDacio Romero
Netgear WDNA3100v3 has a chipset that's compatible with the mt76x2u driver and works without modification with the mainline kernel by writing to sysfs. Signed-off-by: Dacio Romero <dacioromero@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt792xu: enable dmashdl supportDeren Wu
dmashdl(DMA scheduler) was disable and may cause packets corruption without propoer resource handling. Enable this to control resources between usb-bus/pse/hardware-ac-queue. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: usb: store usb endpoint in mt76_queueLorenzo Bianconi
Store usb endpoint in mt76_queue structure and rework q2ep routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: usb: create a dedicated queue for psd trafficLorenzo Bianconi
Create a dedicate queue for psd/mgmt traffic and do not rely on voice one. This is a preliminary patch to fix mt7921u/mt7925 usb dmasl configuration. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7996: fix fw loading timeoutLorenzo Bianconi
Fix the following firmware loading error due to a wrong dma register configuration if wed is disabled. [ 8.245881] mt7996e_hif 0001:01:00.0: assign IRQ: got 128 [ 8.251308] mt7996e_hif 0001:01:00.0: enabling device (0000 -> 0002) [ 8.257674] mt7996e_hif 0001:01:00.0: enabling bus mastering [ 8.263488] mt7996e 0000:01:00.0: assign IRQ: got 126 [ 8.268537] mt7996e 0000:01:00.0: enabling device (0000 -> 0002) [ 8.274551] mt7996e 0000:01:00.0: enabling bus mastering [ 28.648773] mt7996e 0000:01:00.0: Message 00000010 (seq 1) timeout [ 28.654959] mt7996e 0000:01:00.0: Failed to get patch semaphore [ 29.661033] mt7996e: probe of 0000:01:00.0 failed with error -11 Suggested-by: Sujuan Chen" <sujuan.chen@mediatek.com> Fixes: 4920a3a1285f ("wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: update mt798x_wmac_adie_patch_7976Peter Chiu
Add support for a newer ADIE version Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: add locking for accessing mapped registersShayne Chen
Sicne the mapping is global, mapped register access needs to be protected against concurrent access, otherwise a race condition might cause the reads or writes to go towards the wrong register Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7915: fix error recovery with WED enabledFelix Fietkau
Do not clear the interrupt mask register on MT7915, since that prevents MCU_CMD interrupts from being reported, thus causing timeouts during the reset sequence. Defer stopping WED until tx/rx processing activity has stopped. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: check txs format before getting skb by pidPeter Chiu
The PPDU TxS does not include the error bit so it cannot use to report status to mac80211. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: disable HW AMSDU when using fixed ratePeter Chiu
When using fixed rate, HW uses txd DW9 to store tx arrivial time if VTA is set. It would overwrite the msdu_id in txd and lead to token pending if amsdu is enable. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: add support to call csa_finish on a linkAditya Kumar Singh
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-06-03 08:58:23 +0000