summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2022-02-24mt76: mt7915: use min_t() to make code cleanerChangcheng Deng
Use min_t() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: fix the muru tlv issueMeiChia Chiu
The muru enable/disable are only set after the first station connection. Without this patch, the firmware couldn't enable muru if the first connected station is non-HE type. Fixes: 16bff457dd33a ("mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: check band idx for bcc eventRyder Lee
Add missing band idx check for DBDC cases. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7615: Fix assigning negative values to unsigned variableYang Li
Smatch reports the following: drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned variable 'def_th' drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned variable 'def_th' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: connac: adjust wlan_idx size from u8 to u16Chad Monroe
Newer chips such as MT7915 require up to 16-bits for this field. Fixes: 49126ac1f8d26 ("mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module") Signed-off-by: Chad Monroe <chad.monroe@smartrg.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: fix endianness warnings in mt7915_mac_tx_free()Lorenzo Bianconi
Fix the following sparse warning in mt7915_mac_tx_free routine: warning: incorrect type in assignment (different base types) expected unsigned int [usertype] *cur_info got restricted __le32 * warning: cast to restricted __le32 Fixes: c17780e7b21ec ("mt76: mt7915: add txfree event v3") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: fix endianness warnings in mt7915_debugfs_rx_fw_monitorLorenzo Bianconi
Fix the following sparse warnings: warning: incorrect type in initializer (different base types) expected restricted __le16 [usertype] msg_type got int warning: incorrect type in assignment (different base types) expected restricted __le32 [usertype] timestamp got unsigned int Fixes: 988845c9361a0 ("mt76: mt7915: add support for passing chip/firmware debug data to user space") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7615: fix compiler warning on frame sizeDeren Wu
The following error is see from the compiler: mt7615/debugfs.c: In function ‘mt7615_ext_mac_addr_read’: mt7615/debugfs.c:465:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] The issue is due to allocating a buffer as string storage. Fix by converting to a dynamical allocation of the buffer. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: initialize smps mode in mt7915_mcu_sta_rate_ctrl_tlv()Peter Chiu
Initialize smps mode to prevent firmware rate adaptation issue. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: introduce band_idx in mt7915_phyBo Jiao
The wfsys of MT7986 has only single adie chip for non-dbdc devices, and it binds to band1 by default. Hence this patch adds band_idx to explicitly configure phy accordingly. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: mt7915: add support for MT7986Bo Jiao
This adds MT7986 SoC integrated multi-band 4x4 WiFi 6/6E. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: mt7921s: fix missing fc type/sub-type for 802.11 pktsDeren Wu
For non-mmio devices, should set fc values to proper txwi config Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Tested-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: mt7915: fix potential memory leak of fw monitor packetsShayne Chen
Free the skb of fw monitor packets. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: mt7915: Fix channel state update error issueBo Jiao
Fix channel state update error issue due to wrong register access for mt7916. Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: fix endianness errors in reverse_frag0_hdr_transLorenzo Bianconi
Fix ht ctl field size in mt{7615,7915,7921}_reverse_frag0_hdr_trans. Fix the following endianness warnings in mt{7615,7915,7921}_reverse_frag0_hdr_trans: drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: expected restricted __le16 [usertype] frame_control drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: expected restricted __le16 [usertype] seq_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: expected restricted __le32 [usertype] qos_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: expected restricted __le32 [usertype] ht_ctrl drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: got unsigned long drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:25: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:38: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: expected unsigned int [usertype] *cur_info drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: got restricted __le32 * drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1451:34: warning: cast to restricted __le32 Fixes: dc5399a50b45f ("mt76: reverse the first fragmented frame to 802.11") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: mt7615: introduce SAR supportLorenzo Bianconi
Add SAR spec support to mt7615 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-23mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDUJohan Almbladh
Before, the hardware would be allowed to transmit injected 802.11 MPDUs as A-MSDU. This resulted in corrupted frames being transmitted. Now, injected MPDUs are transmitted as-is, without A-MSDU. The fix was verified with frame injection on MT7915 hardware, both with and without the injected frame being encrypted. If the hardware cannot do A-MSDU aggregation on MPDUs, this problem would also be present in the TX path where mac80211 does the 802.11 encapsulation. However, I have not observed any such problem when disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode. Therefore this fix is isolated to injected frames only. The same A-MSDU logic is also present in the mt7921 driver, so it is likely that this fix should be applied there too. I do not have access to mt7921 hardware so I have not been able to test that. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-16ieee80211: add EHT 1K aggregation definitionsMordechay Goodstein
We add the fields for parsing extended ADDBA request/respond, and new max 1K aggregation for limit ADDBA request/respond. Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF -> IEEE80211_MAX_AMPDU_BUF_HE. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mt76: redefine mt76_for_each_q_rx to adapt mt7986 changesBo Jiao
Check ndesc of q_rx to avoid potential hole in iteration. This is an intermediate patch to add mt7986 support. Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: dma: initialize skip_unmap in mt76_dma_rx_fillLorenzo Bianconi
Even if it is only a false-positive since skip_buf0/skip_buf1 are only used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in mt76_dma_rx_fill in order to fix the following UBSAN report: [ 13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13 [ 13.924909] load of value 225 is not a valid value for type '_Bool' [ 13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu [ 13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021 [ 13.924915] Call Trace: [ 13.924917] <TASK> [ 13.924920] show_stack+0x52/0x58 [ 13.924925] dump_stack_lvl+0x4a/0x5f [ 13.924931] dump_stack+0x10/0x12 [ 13.924932] ubsan_epilogue+0x9/0x45 [ 13.924934] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 13.924935] ? __iommu_dma_map+0x84/0xf0 [ 13.924939] mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76] [ 13.924949] mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76] [ 13.924954] mt76_dma_init+0xc9/0x150 [mt76] [ 13.924959] ? mt7921_dma_enable+0x110/0x110 [mt7921e] [ 13.924966] mt7921_dma_init+0x1e3/0x260 [mt7921e] [ 13.924970] mt7921_register_device+0x29d/0x510 [mt7921e] [ 13.924975] mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e] [ 13.924980] mt7921_pci_probe+0x43/0x60 [mt7921e] [ 13.924984] local_pci_probe+0x4b/0x90 [ 13.924987] pci_device_probe+0x115/0x1f0 [ 13.924989] really_probe+0x21e/0x420 [ 13.924992] __driver_probe_device+0x115/0x190 [ 13.924994] driver_probe_device+0x23/0xc0 [ 13.924996] __driver_attach+0xbd/0x1d0 [ 13.924998] ? __device_attach_driver+0x110/0x110 [ 13.924999] bus_for_each_dev+0x7e/0xc0 [ 13.925001] driver_attach+0x1e/0x20 [ 13.925003] bus_add_driver+0x135/0x200 [ 13.925005] driver_register+0x95/0xf0 [ 13.925008] ? 0xffffffffc0766000 [ 13.925010] __pci_register_driver+0x68/0x70 [ 13.925011] mt7921_pci_driver_init+0x23/0x1000 [mt7921e] [ 13.925015] do_one_initcall+0x48/0x1d0 [ 13.925019] ? kmem_cache_alloc_trace+0x19e/0x2e0 [ 13.925022] do_init_module+0x62/0x280 [ 13.925025] load_module+0xac9/0xbb0 [ 13.925027] __do_sys_finit_module+0xbf/0x120 [ 13.925029] __x64_sys_finit_module+0x18/0x20 [ 13.925030] do_syscall_64+0x5c/0xc0 [ 13.925033] ? do_syscall_64+0x69/0xc0 [ 13.925034] ? sysvec_reschedule_ipi+0x78/0xe0 [ 13.925036] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 13.925039] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 13.925040] RIP: 0033:0x7fbf2b90f94d [ 13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d [ 13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013 [ 13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441 [ 13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0 [ 13.925053] </TASK> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: do not always copy ethhdr in reverse_frag0_hdr_transLorenzo Bianconi
Do not always copy ethernet header in mt{7615,7915,7921}_reverse_frag0_hdr_trans and use a pointer instead. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector stateFelix Fietkau
Fixes corner cases in enabling/disabling detector Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: fix/rewrite the dfs state handling logicFelix Fietkau
Copy the updated logic from mt7915 to to fix issues in handling DFS radar detector states Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix/rewrite the dfs state handling logicFelix Fietkau
Client mode on DFS channels was broken, because the old code was activating the DFS detector on radar channels while leaving it in CAC state. This was caused by making the decision based on the channel radar flag, instead of hw->conf.radar_enabled. In order to properly deal with the various corner cases, rip out the state handling code and replace it with something that's much easier to reason about. Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt76x02: improve tx hang detectionFelix Fietkau
Instead of checking if any queue has not made progress since the last run, only trigger hang detection if one of the queues has not made any progress in 10 subsequent runs. This should reduce false positive firmware restarts Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76x02: improve mac error check/reset reliabilityFelix Fietkau
On AP mode devices, check beacon tx counters to detect MAC errors. When an error is detected, stop the MAC before resetting it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921s: run sleep mode by defaultSean Wang
Apply sleep mode by default to reduce power consumption as possible. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: sdio: honor the largest Tx buffer the hardware can supportSean Wang
We don't have to create a separate sdio.xmit_buf buffer for each queue. Instead, we just need to create one, reuse it across all queues to reduce memory consumption further. And then we should take it into account the actual the host and the device MMC capability to determine what the appropriate xmit_buf_size can be. Both MT7921S and MT7663 can support up to Tx FIFO size of 0x3fe00 which means the device can receive 511 blocks of block size 512 in a row from the host. So if the driver aggregates the frames as many as possible the the device can support, we can merge multiple MMC requests into a single one to get rid of the overhead of the handling and synchronizing in those unnecessary MMC requests and reduce the SDIO lock contention with the Bluetooth concurrent traffic and finally to have the higher bus utilization with less idle cycle. With the patch, it is helpful for WiFi to have steady throughput performance especially while running Bluetooth concurrently. Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix the nss setting in bitratesMeiChia Chiu
without this change, the fixed MCS only supports 1 Nss. Fixes: 70fd1333cd32f ("mt76: mt7915: rework .set_bitrate_mask() to support more options") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv()Peter Chiu
The maximum max_mpdu_size of mt7915 is 7991, whereas mt7916 can support 11454. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()Peter Chiu
Should use peer's bandwidth instead of chandef->width to get correct mcs_map. Fixes: 76be6c076c077 ("mt76: mt7915: add .set_bitrate_mask() callback") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921s: fix a possible memory leak in mt7921_load_patchLorenzo Bianconi
Always release fw data at the end of mt7921_load_patch routine. Fixes: 78b217580c509 ("mt76: mt7921s: fix bus hang with wrong privilege") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: fix possible memory leak in mt7915_mcu_add_staLorenzo Bianconi
Free allocated skb in mt7915_mcu_add_sta routine in case of failures. Fixes: 89bbd3730f382 ("mt76: mt7915: rework starec TLV tags") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: stop the radar detector after leaving dfs channelXing Song
The radar detctor is used for dfs channel. So it will start after switching to dfs channel and will stop after leaving. The TX will be blocked if radar detctor isn't stopped in non-dfs channel. This patch resets the dfs state to indicate the radar detector needs to be stopped. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_updateLorenzo Bianconi
Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array. Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_updateLorenzo Bianconi
Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array. Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7663s: flush runtime-pm queue after waking up the deviceLorenzo Bianconi
Add missing mt76_connac_pm_dequeue_skbs routine waking up mt7663s device from runtime-pm sleep state. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN)Piotr Dymacz
The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which can be found in several different LG TV models. This module is based on already supported MediaTek MT7663U series. Device from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=310c Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms And dmesg: usbcore: registered new interface driver mt7663u mt7663u 1-1.4:1.2: N9 Firmware Version: 3.1.1, Build Time: 20200604161656 mt7663u 1-1.4:1.2: Region number: 0x4 mt7663u 1-1.4:1.2: Parsing tailer Region: 0 mt7663u 1-1.4:1.2: Region 0, override_addr = 0x00118000 mt7663u 1-1.4:1.2: Parsing tailer Region: 1 mt7663u 1-1.4:1.2: Parsing tailer Region: 2 mt7663u 1-1.4:1.2: Parsing tailer Region: 3 mt7663u 1-1.4:1.2: override_addr = 0x00118000, option = 3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotapLorenzo Bianconi
Remove duplicated DATA4_SU_MU_SPTL_REUSE flag configuration in mt7921_mac_decode_he_radiotap routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotapLorenzo Bianconi
Add missing DATA4_TB_SPTL_REUSE1 he radiotap flag to mt7915_mac_decode_he_radiotap routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: connac: move mt76_connac_lmac_mapping in mt76-connac moduleLorenzo Bianconi
mt76_connac_lmac_mapping is shared between mt7921 and mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enable radar background detectionLorenzo Bianconi
Notify userland the hw supports background radar/CAC detection. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: report radar pattern if detected by rdd2Lorenzo Bianconi
Report radar pattern to mac80211 if detected by the offchannel chain. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce rdd_monitor debugfs nodeLorenzo Bianconi
Introduce rdd_monitor debugfs node in order to dump rdd2 configuration. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: enable radar trigger on rdd2Lorenzo Bianconi
Enable radar trigger for rdd2 in mt7915_radar_trigger. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: introduce mt7915_set_radar_background routineLorenzo Bianconi
Introduce mt7915_mcu_rdd_background_enable and mt7915_mcu_background_chain_ctrl routines to configure rx dfs dedicated chain. This is a preliminary patch to add zero-wait dfs support performing CAC detection on rdd2. Tested-by: Owen Peng <owen.peng@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7915: set bssinfo/starec command when adding interfaceShayne Chen
bssinfo/starec disabled commands are sent during removing interface. However, if we don't set corresponding enabled commands before removing interface, the fw may enter an exception state due to some NULL structs. For example, the following commands can cause fw timeout in our newer chips: ifconfig wlan0/mon0 up ifconfig wlan0/mon0 down Fix this by setting enabled commands once interface added. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: toggle runtime-pm adding a monitor vifLorenzo Bianconi
Toggle runtime-pm and deep-sleep configuration adding/removing a montior vif in order to forward all tx/rx frames to mac80211. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx()Lorenzo Bianconi
Fix the following sparse warning in mt7921_mcu_set_tx routine: drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: expected restricted __le16 [usertype] aifs drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:792:25: got unsigned char [usertype] aifs drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:798:35: warning: incorrect type in assignment (different base types) drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:798:35: expected restricted __le16 [usertype] cw_min Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: sdio: disable interrupt in mt76s_sdio_irqSean Wang
It is unnecessary to keep the interrupt enabled in mt76s_sdio_irq because the driver is already aware of the interrupt, schedules the mt76s_txrx_worker to handle the corresponding actions, and eventually, the interrupt would be enabled again when mt76s_txrx_worker finishes its work. So we can safely disable the interrupt in mt76s_sdio_irq as soon as possible to increase the CPU productivity by dropping the redundant interrupt triggers. Note that sdio lock acquired/released would be handled in sdio_irq_work at mmc driver so we don't take care in mt76s_sdio_irq at function driver. Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-10-03 11:30:11 +0000