summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/quantenna/qtnfmac/commands.c
AgeCommit message (Collapse)Author
2018-08-02qtnfmac: implement basic WoWLAN supportSergey Matyukevich
This patch implements basic WoWLAN support in qtnfmac driver, including processing of WoWLAN features reported by firmware and implementation of cfg80211 suspend/resume/wakeup callbacks. Currently the following WoWLAN triggers are supported: disconnect, magic packet, custom pattern packet. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30qtnfmac: enable multiple SSIDs scan supportAndrey Shevchenko
Enable support for multiple SSIDs scans. Get max number of supported SSIDs from firmware and report to cfg80211 core. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30qtnfmac: implement cfg80211 power management callbackSergei Maksimenko
Implement set_power_mgmt() callback that forwards power saving settings to the device firmware. Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute typesOmer Efrat
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27qtnfmac: enable source MAC address randomization supportAndrey Shevchenko
Enable support for source MAC address randomization of probe request frames. Pass addr/mask randomization parameters to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30qtnfmac: fix bg_scan_period parameter processingAndrey Shevchenko
Do not process bg_scan_period parameter in qtnfmac driver. Pass correct values as is. In the case of invalid values pass default value. Leave further processing to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix firmware command error pathDmitry Lebed
Free command skb if bus state is not QTNF_FW_STATE_ACTIVE. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: decode error codes from firmware repliesIgor Mitsyanko
Introduce a function that will map an error code reported in reply to a firmware command, into one of standard errno codes. Use additional error codes to improve error reporting for MAC address changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: remove redundant 'unlikely' checksSergey Matyukevich
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: modify supported interface combinationsSergey Matyukevich
Update existing code handling configuration of supported interface combinations. Current implementation is not complete since it does not report multiple interface combinations which are incompatible with each other. Instead current implementation packs all the supported combinations into single entry. In fact currently qsr10g wireless card supports the following two distinct interface combinations: 1. STA/repeater: 1 STA and/or 1 AP { { .max = 1, .types = NL80211_IFTYPE_AP}, { .max = 1, .types = NL80211_IFTYPE_STA}, } 2. AP/mBSS { { .max = 8, .types = NL80211_IFTYPE_AP}, } The list of supported configuration is reported by firmware during wireless card bring-up. Communication protocol between firmware and host has been updated accordingly in order to accommodate passing multiple interface combination entries. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: report hardware/firmware information via ethtoolVasily Ulyanov
Enable reporting of qtnfmac hardware and firmware details using ethtool command. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: get more hardware info from cardVasily Ulyanov
Various bits of hardware and firmware versions are useful for debug and troubleshooting. Get more information from the wireless card. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: remove struct qlink_cmd_set_mac_aclVasily Ulyanov
TLV is used to pass ACL data to firmware in start_ap cfg80211 callback. Use the same approach in set_mac_acl cfg80211 callback. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09qtnfmac: support MAC address based access controlVasily Ulyanov
This allows a running AP to blacklist STAs by their MAC addresses respecting the configured policy (either accept or deny unless listed). It can be setup on .start_ap or with .set_mac_acl commands. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09qtnfmac: modify GET_STA_STATS cmd format for back/forward compatibilityIgor Mitsyanko
A set of per-STA statistics can potentially change quite often. To ensure backwards and forward compatibility, modify GET_STA_STATS command format: - introduce two TLV types - first TLV is a variable-sized bitmap of statistics values that are filled by firmware - second TLV is a structure with statistics itself Only values specified in first TLV are valid. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09qtnfmac: fill wiphy's extended capabilitiesVasily Ulyanov
These are needed to inform userspace about features the hardware supports (e.g. BSS Transition Management 802.11v) Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09qtnfmac: add support for radar detection and CACIgor Mitsyanko
Implement two parts of radar handling logic: - cfg80211 .start_radar_detect callback to allow nl80211 to initiate CAC - radar event to allow wlan device to advertize CAC and radar events Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-09qtnfmac: pass complete channel data between driver and firmwareSergey Matyukevich
Center frequency is not enough to describe the channel in HT and VHT modes. For 40MHz and 80MHz channels both primary channel and center frequency should be specified in order to qualify channel completely. This change adds primary channel info into qlink_chandef structure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: pass all CONNECT cmd params to wireless card for processingIgor Mitsyanko
Specifically, following parameters are needed for wireless device configuration but were not available to it before: - HT/VHT capabilities and capabilities masks. - full channel info (not just IEEE number) - BSSID hint - previous BSSID for reassoc request Move Management Frame Protection setting from common encr info structure into STA-specific .connect command parameters. Make sure that all new qlink structure definitions are alignment-safe. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: include HTCAP and VHTCAP into config AP commandIgor Mitsyanko
Include HT/VHT caps directly into command so that they won't have to be searched for in IEs. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: configure and start AP interface with a single commandIgor Mitsyanko
Current logic artificially divides "start AP" procedure into three stages: - generic interface configuration (security, channel etc) - IE's processing - enable AP mode on interface This separation would not allow to do a proper device configuration as first stage needs to use information from IEs that are processed on a second stage. Which means first and second stages have to be meged. In that case there is no point anymore to keep third stage either, so merge all three into a single command. This new command carries all the same info as contained in "struct cfg80211_ap_settings". Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usageIgor Mitsyanko
Data contained within "Append IEs" command (QLINK_CMD_MGMT_SET_APPIE) duplicates QTN_TLV_ID_IE_SET TLV. Convert the command to use that TLV instead. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: extend "IE set" TLV to include frame type infoIgor Mitsyanko
Specifying frame type for "IE set" TLV will allow to use several TLVs in a single message. Modify users accordingly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: get rid of PHYMODE capabilities flagsIgor Mitsyanko
Supported WiFi operation modes are now identified per-band based on HT/VHT capabilities of each band. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: initialize HT/VHT caps "can override" masksIgor Mitsyanko
Information on which HT/VHT capabilities can be overridden is reported per-MAC by wireless device. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: use per-band HT/VHT info from wireless deviceIgor Mitsyanko
HT/VHT capabilities must be reported per each band supported by a radio, not for all bands on a radio. Furthermore, driver better not assume any capabilities and just use whetever is reported by device itself. To support this, convert "get channels" command into "get band info" command. Difference is that it may also carry HT/VHT capabilities along with channels information. While at it, also add "num_bitrates" field to "get band info" command, for future use. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-30qtnfmac: advertise support of inactivity timeoutIgor Mitsyanko
Wireless device may implement a logic to kick-out STA due to inactivity for a certain period of time. This feature needs to be advertised to higher layers if supported. Timeout value is still taken from parameters to START_AP command, nothing changes here. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: make encryption info a part of CONNECT command.Igor Mitsyanko
Encryption info is a constant part of STA settings, no point to pass it as an optional TLV. Remove QTN_TLV_ID_CRYPTO type as it's not used anymore. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: do not cache BSS state in per-VIF structureIgor Mitsyanko
This cached state is used only once immediately after it is initilized, except for BSSID value that is used for events processing. There is no reason in keeping unused data in driver's state. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: get rid of QTNF_STATE_AP_START flagIgor Mitsyanko
QTNF_STATE_AP_START usage is redundant and imposes additional state synchronization maintenance. We may as well leave state checking to network card and upper layers (cfg80211, nl80211 and userspace). Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: get rid of QTNF_STATE_AP_CONFIGIgor Mitsyanko
QTNF_STATE_AP_CONFIG is redundant and its usage can be safely removed. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: pass channel definition to WiFi card on START_AP commandIgor Mitsyanko
Introduce "channel definition" TLV containing full channel description (center frequence for both segments + BW) and pass it to wireless card in a payload to START_AP command. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: pass all AP settings to wireless card for processingIgor Mitsyanko
Modify QLINK START_AP command payload to pass all AP settings contained within struct cfg80211_ap_settings. Make most of settings a constant part of "config AP" command instead of passing it as an optional TLVs. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13qtnfmac: do not cache AP settings in driver structuresIgor Mitsyanko
Cached AP setings are passed to WiFi card right after they are initialized and are never used for anything else. There is no point in keeping them in driver state. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25qtnfmac: remove unused mac::status fieldIgor Mitsyanko
There are no users of this field and it can safely be removed. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25qtnfmac: do not cache CSA chandef infoIgor Mitsyanko
It is never used for anything useful, and all logic is handled by either WiFi card or higher layers. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25qtnfmac: pass VIF info to SendChannel commandIgor Mitsyanko
Do not assume whether wireless device can or can not handle switching several interfaces on a single radio to different channels. Device will handle it itself and will return appropriate error code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25qtnfmac: do not cache channel info from "connect" commandIgor Mitsyanko
This makes no sense because real operational channel is choosen based on AP operation, not on what STA is configured to. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25qtnfmac: retrieve current channel info from EPIgor Mitsyanko
Do not try to cache current operational channel info in driver, this is a potential source of synchronization issues + driver does not really need that info. Introduce GET_CHANNEL command and process it appropriately. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: prepare for AP_VLAN interface type supportSergey Matyukevich
Modify qlink command structures and interface types handling to prepare adding AP_VLAN support to qtnfmac driver. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: fix handling of iftype mask reported by firmwareSergey Matyukevich
Firmware sends supported interface type rather than mask. As a result, types field of ieee80211_iface_limit structure may end up having multiple iftype bits set. This leads to WARN_ON from wiphy_verify_combinations. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: implement cfg80211 channel_switch handlerSergey Matyukevich
This patch implements cfg80211 channel_switch handler enabling CSA channel-switch procedure. Driver performs only basic validation of the requested new channel and then sends command to firmware. Beacon IEs are not sent since beacon update is handled by firmware. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: move current channel info from vif to macSergey Matyukevich
Wireless cfg80211 core supplies channel settings in cfg80211_ap_settings structure for each BSS in multiple BSS configuration. On the other hand all the virtual interfaces on one radio are using the same PHY settings including channel. Move chandef structure from vif to mac structure in order to mantain the only instance of cfg80211_chan_def structure in qtnf_wmac rather than its multiple copies in qtnf_vif. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: implement reporting current channelSergey Matyukevich
Implement current channel reporting functionality. Current operating channel can be obtained either directly using cfg80211 get_channel callback or from stats reported by cfg80211 survey_dump callback. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: implement cfg80211 dump_survey handlerSergey Matyukevich
This patch implements cfg80211 dump_survey handler enabling per-channel survey data reports. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: add missing bus lockSergey Matyukevich
Add missing bus lock into get_mac_chan_info command. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: updates for regulatory supportSergey Matyukevich
On startup driver obtains regulatory rules from firmware and enables them during wiphy registration. Later on regulatory domain change can be requested by host. In this case firmware is notified about the upcoming changes. If the change is valid, then firmware updates hardware channel configuration and host driver receives updated channel info for each band. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-25Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 New features and bug fixes to quite a few different drivers, but nothing really special standing out. What makes me happy that we have now more vendors actively contributing to upstream drivers. In this pull request we have patches from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I still have patches from Marvell and Quantenna pending in patchwork. Now that's something comparing to how things looked 11 years ago in Jeff Garzik's "State of the Union: Wireless" email: https://lkml.org/lkml/2006/1/5/671 Major changes: wil6210 * add low level RF sector interface via nl80211 vendor commands * add module parameter ftm_mode to load separate firmware for factory testing * support devices with different PCIe bar size * add support for PCIe D3hot in system suspend * remove ioctl interface which should not be in a wireless driver ath10k * go back to using dma_alloc_coherent() for firmware scratch memory * add per chain RSSI reporting brcmfmac * add support multi-scheduled scan * add scheduled scan support for specified BSSIDs * add support for brcm43430 revision 0 wlcore * add wil1285 compatible rsi * add RS9113 USB support iwlwifi * FW API documentation improvements (for tools and htmldoc) * continuing work for the new A000 family * bump the maximum supported FW API to 31 * improve the differentiation between 8000, 9000 and A000 families ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-01 09:34:37 +0000