summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ralink
AgeCommit message (Collapse)Author
2023-10-03wifi: rt2x00: fix MT7620 low RSSI issueShiji Yang
On Mediatek vendor driver[1], MT7620 (RT6352) uses different RSSI base value '-2' compared to the other RT2x00 chips. This patch introduces the SoC specific base value to fix the low RSSI value reports on MT7620. [1] Found on MT76x2E_MT7620_LinuxAP_V3.0.4.0_P3 ConvertToRssi(). Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB031571CDB146C414A908A66DBCFEA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-09-28wifi: rt2x00: remove redundant check if u8 array element is less than zeroColin Ian King
The check on vga_gain[ch_idx] being less than zero is always false since vga_gain is a u8 array. Clean up the code by removing the check and the following assignment. Cleans up clang scan build warning: drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9704:26: warning: result of comparison of unsigned expression < 0 is always false [-Wtautological-unsigned-zero-compare] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230920121240.120455-1-colin.i.king@gmail.com
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2023-08-23wifi: rt2x00: limit MT7620 TX power based on eeprom calibrationShiji Yang
In the vendor driver, the current channel power is queried from EEPROM_TXPOWER_BG1 and EEPROM_TXPOWER_BG2. And then the mixed value will be written into the low half-word of the TX_ALC_CFG_0 register. The high half-word of the TX_ALC_CFG_0 is a fixed value 0x2f2f. We can't get the accurate TX power. Based on my tests and the new MediaTek mt76 driver source code, the real TX power is approximately equal to channel_power + (max) rate_power. Usually max rate_power is the gain of the OFDM 6M rate, which can be readed from the offset EEPROM_TXPOWER_BYRATE +1. Based on these eeprom values, this patch adds basic TX power control for the MT7620 and limits its maximum TX power. This can avoid the link speed decrease caused by chip overheating. rt2800_config_alc() function has also been renamed to rt2800_config_alc_rt6352() because it's only used by RT6352 (MT7620). Notice: It's still need some work to sync the max channel power to the user interface. This part is missing from the rt2x00 driver framework. If we set the power exceed the calibration value, it won't take effect. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB03159090ED14044215E59FD6BC10A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-08-21wifi: rt2x00: correct MAC_SYS_CTRL register RX mask in R-CalibrationShiji Yang
For MAC_SYS_CTRL register, Bit[2] controls MAC_TX_EN and Bit[3] controls MAC_RX_EN (Bit index starts from 0). Therefore, 0x08 is the correct mask for RX. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB03150B571B67B896A504AC34BC0EA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-06-15wifi: rt2x00: fix the typo in commentsDeming Wang
Fix typo in the description of 'non-succesfull'. Signed-off-by: Deming Wang <wangdeming@inspur.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230612114612.1640-1-wangdeming@inspur.com
2023-04-03wifi: rt2x00: Fix memory leak when handling surveysArmin Wolf
When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter. Fixes: 5447626910f5 ("rt2x00: save survey for every channel visited") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330215637.4332-1-W_Armin@gmx.de
2023-01-16wifi: rt2x00: Remove useless else ifJiapeng Chong
The assignment of the else and else if branches is the same, so the else if here is redundant, so we remove it. ./drivers/net/wireless/ralink/rt2x00/rt2800lib.c:8927:9-11: WARNING: possible condition with no effect (if == else). Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3631 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230106022731.111243-1-jiapeng.chong@linux.alibaba.com
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21wifi: rt2x00: use explicitly signed or unsigned typesJason A. Donenfeld
On some platforms, `char` is unsigned, but this driver, for the most part, assumed it was signed. In other places, it uses `char` to mean an unsigned number, but only in cases when the values are small. And in still other places, `char` is used as a boolean. Put an end to this confusion by declaring explicit types, depending on the context. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.com
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-24wifi: rt2x00: correctly set BBP register 86 for MT7620Daniel Golle
Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set SoC wmac clock registerDaniel Golle
Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set VGC gain for both chains of MT7620Daniel Golle
Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620Daniel Golle
Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: fix HT20/HT40 bandwidth switch on MT7620Daniel Golle
Add missing configuration of the channel bandwidth filter to the channel setup function for MT7620. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move helper functions up in fileDaniel Golle
Move register access helper functions up to the head of the file so they can be used in all functions. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c27baa8efd5c29e2bcb2432925d9cdc5c913a125.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add TX LOFT calibration for MT7620Tomislav Požega
Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d9295a9138a1f552b648aacb84e1419d38f5c896.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620Daniel Golle
The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXIQ calibration for MT7620Tomislav Požega
Add RXIQ calibration found in mtk driver. With old openwrt builds this gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RXDCOC calibration for MT7620Tomislav Požega
Add RXDCOC calibration code from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [fixed typo reported by Serge Vasilugin <vasilugin@yandex.ru>] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add r calibration for MT7620Tomislav Požega
Add r calibration code as found in mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e0c34f233089bec4eb73826bc4f512166ee25934.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add RF self TXDC calibration for MT7620Tomislav Požega
Add TX self calibration based on mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/dbb6e5a0c12d6101477bd09e83253091d21512c9.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: move up and reuse busy wait functionsDaniel Golle
Move bbp_ready and rf_ready busy wait functions up in the code so they can more easily be used. Allow specifying register mask in rf_ready function which is useful for calibration routines which will be added in follow-up commits. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add support for external PA on MT7620Daniel Golle
Implement support for external PA connected to MT7620A. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> [pozega.tomislav@gmail.com: use chanreg and dccal helpers.] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/af2c68ff831816a86fc39b0c10911c129a1f03dc.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: add throughput LED triggerDavid Bauer
This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Tested-by: Christoph Krapp <achterin@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org
2022-09-24wifi: rt2x00: define RF5592 in init_eeprom routineTomislav Požega
Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592 PCIe radio (a single chip 2T2R 802.11abgn solution). Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/d7eccb2c7b8ec4cd360fa2007796abffc35abb0d.1663445157.git.daniel@makrotopia.org
2022-09-19wifi: rt2x00: Fix "Error - Attempt to send packet over invalid queue 2"Hans de Goede
Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver is seeing tx skbs submitted to it with the queue-id set to 2 / set to IEEE80211_AC_BE on a rt2500 card when associating with an access-point. This causes rt2x00queue_get_tx_queue() to return NULL and the following error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2", after which association with the AP fails. This patch works around this by mapping QID_AC_BE and QID_AC_BK to QID_AC_VI when there are only 2 tx_queues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220908173618.155291-2-hdegoede@redhat.com
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-18wifi: rt2x00: fix repeated words in commentsJilin Yuan
Delete the redundant words 'is' and 'with'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220710041442.16177-1-yuanjilin@cdjrlc.com
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-04-23net: remove third argument of usb_maxpacket()Vincent Mailhol
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Oliver Neukum <oliver@neukum.org> CC: David S. Miller <davem@davemloft.net> CC: Jakub Kicinski <kuba@kernel.org> CC: Woojung Huh <woojung.huh@microchip.com> CC: Felix Fietkau <nbd@nbd.name> CC: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> CC: Ryder Lee <ryder.lee@mediatek.com> CC: Kalle Valo <kvalo@kernel.org> CC: Matthias Brugger <matthias.bgg@gmail.com> CC: Stanislaw Gruszka <stf_xl@wp.pl> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-6-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-29rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka
As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/ Reported-and-tested-by: Exuvo <exuvo@exuvo.se> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl
2021-09-21rt2x00: remove duplicate USB device IDKrzysztof Kozlowski
The device 0x043e,0x7a32 is already on the list under CONFIG_RT2800USB_RT55XX. Since it is the sole Arcadyan entry in RT55xx, assume the proper chip is RT55xx, not RT53xx, although this was not confirmed by testing or 3rd party sources. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210917092108.19497-3-krzysztof.kozlowski@canonical.com
2021-06-15rt2x00: do not set timestamp for injected framesStanislaw Gruszka
We setup hardware to insert TSF timestamp for beacon and probe response frames. This is undesired for injected frames, which might want to set their own timestamp values, so disable this setting for injected frames. Tested-by: ZeroBeat <ZeroBeat@gmx.de> Tested-by: n0w1re <n0w1re@protonmail.ch> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210504081220.666939-1-stf_xl@wp.pl
2021-06-15rt2x00: remove leading spaces before tabsHui Tang
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621407345-10625-3-git-send-email-tanghui20@huawei.com
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-08rt2800usb: add Sweex LW163V2 id'sStanislaw Gruszka
Add support for Sweex LW163V2 device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204101902.199590-1-stf_xl@wp.pl
2021-02-08rt2x00: remove duplicate word and fix typo in commentwengjianfeng
remove duplicate word 'we' in comment change 'then' to 'than' in comment Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204005119.18060-1-samirweng1979@163.com
2020-12-08rt2x00: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b0d4c50b803bc38ed370521b9b0a44365cae9386.1605896060.git.gustavoars@kernel.org
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11rt2x00: remove WDS codeJohannes Berg
The ability to reach this code was hidden behind CONFIG_WIRELESS_WDS, which was just removed. Clean up the driver accordingly. Link: https://lore.kernel.org/r/20201109105103.c3248409e449.I74954b87e5bdd23c99a5314d2b265889292a6cb5@changeid Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-07rt2x00: save survey for every channel visitedMarkov Mikhail
rt2800 only gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru> sgruszka: remove unused variable Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104142524.94375-1-stf_xl@wp.pl
2020-08-27rt2x00: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-15-allen.cryptic@gmail.com
generated by cgit (git 2.34.1) at 2025-04-07 05:18:36 +0000