summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/base.c
AgeCommit message (Collapse)Author
2019-10-04mac80211: simplify TX aggregation startJohannes Berg
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-04rtlwifi: fix a potential NULL pointer dereferenceKangjie Lu
In case alloc_workqueue fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix all blank line irregularities in main code filesLarry Finger
The types of problems fixed are as follows: WARNING: Missing a blank line after declarations CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Replace old-style license informationLarry Finger
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08rtlwifi: remove set but not used variable 'cmd_seq'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/base.c: In function 'rtl_c2h_content_parsing': drivers/net/wireless/realtek/rtlwifi/base.c:2313:13: warning: variable 'cmd_seq' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01rtlwifi: Don't clear num_rx_inperiod too earlyBernd Edlinger
This patch moves the clearing of rtlpriv->link_info.num_rx_inperiod in rtl_watchdog_wq_callback a few lines down. This is necessary since it is still used in the "AP off" detection code block. Moved clearing of rtlpriv->link_info.num_rx_inperiod as well for consistency. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13rtlwifi: Fix leak of skb when processing C2H_BT_INFOLarry Finger
With commit 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO"), calling rtl_c2hcmd_enqueue() with rtl_c2h_fast_cmd() true, the routine returns without freeing that skb, thereby leaking it. This issue has been discussed at https://github.com/lwfinger/rtlwifi_new/issues/401 and the fix tested there. Fixes: 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO") Reported-and-tested-by: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24rtlwifi: Fix kernel Oops "Fw download fail!!"Ping-Ke Shih
When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun <abacabadabacaba@gmail.com> # 8723DE Tested-by: Shivam Kakkar <shivam543@gmail.com> # 8723BE on 4.18-rc1 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Cc: Stable <stable@vger.kernel.org> # 4.11+ Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-18ieee80211: bump IEEE80211_MAX_AMPDU_BUF to support HEJohannes Berg
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere. This is derived from my internal patch, parts of which Luca had sent upstream. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-29rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFOPing-Ke Shih
In former patch, I enqueu all C2H commands and processed by a workqueue. In case C2H_BT_INFO will issue a H2C command to set BT reg, and wait for a C2H ack. But it is totally impossible that C2H workqueue waits for a C2H command, so kernel log warn rtlwifi: :<0> btmpinfo wait (req_num=0) timeout Since the C2H ack command C2H_BT_MP can be safely processed in interrupt context, add a fast command path to deal with the command. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: access skb->data to get C2H data by macroPing-Ke Shih
The format of C2H data is ID(1 byte) + Length(1 byte) + value, and it is more readable to use macros to access C2H data. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: use sk_buff to queue C2H commandsPing-Ke Shih
We use 'struct rtl_c2hcmd' to store C2H commands originally, and the code is slightly complex to enqueue and dequeue and also wastes time to allocate and memcpy data. Since C2H commands are asynchronous events, they can be processed in work queue, so RX ISR enqueues C2H result in removal of rtl_c2h_packet_handler(). Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove hal_op c2h_content_parsingPing-Ke Shih
Similar to rx_command_packet, we can call rtl_c2h_content_parsing so the hal_op isn't necessary. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove duplicate C2H handlerPing-Ke Shih
Merge duplicate C2H handler and implement the handler in base.c. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove CONNECTION_MONITOR flagPing-Ke Shih
To use keep-alive mechanism in mac80211 stack, since driver supports reporting accurate nullfunc frame tx ack now. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: support accurate nullfunc frame tx ack reportTzu-En Huang
In order to realize the keep-alive mechanism in mac80211 stack, reporting accurate tx ack status for nullfunc frame is added in this commit. If current frame is nullfunc frame, we ask firmware to report by filling TX report bit in TX descriptor. After this frame DMA done, TX interrupt is triggered but TX status is unknown at this moment, so enqueue this skb into tx_report->queue. Finally, C2H report will be received if the frame is transmitted successfully or retried over, and then we report to mac80211 with IEEE80211_TX_STAT_ACK flag only if it's successful. Otherwise, if failure or timeout (one second), we report to mac80211 without this flag. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: remove redundant statement found by static checkerPing-Ke Shih
smatch reports "rtl_is_special_data() warn: inconsistent indenting", but it is an obvious redundant statement so remove it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: Add rate section and its related definition and commentPing-Ke Shih
Add comments to make it to be easier to understand, and add compile time assertions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: Extend tx_power_by_rate_offset size for newer ICPing-Ke Shih
In older design, the TX power is grouped into rate section (smaller array size), but new design groups them into rate (larger array size). Thus, we extend the size for both cases, and add compile time assertion. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: Use 6 bits as sequence number of TX reportPing-Ke Shih
In new design, SW_DEFINE[1:0] of tx desc are used by firmware, and the TX report only contains SW_DEFINE[7:0]. To satisfy with all cases, driver uses SW_DEFINE[7:2] as sequence number. Besides, the format of tx report have been changed, so a new flag RTL_SPEC_EXT_C2H is used to access report. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: Add Support VHT to spec_verPing-Ke Shih
We are going to add 8822be, which is a VHT 2x2 wifi chip, so add VHT flag to replace enumeration of chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: enable mac80211 fast-tx supportPing-Ke Shih
Enable the mac80211 fast-tx feature, since our driver already support hw_flags required by fast-tx and is able to let mac80211 stack to transmit packet through fast-xmit path. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: Add spec_ver to check whether use new rate-id or notPing-Ke Shih
The field spec_ver is IC's specification mask for common code to do proper process to specified IC. This commit add a field new rate ID for new generation IC. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: 8822be has to report vht capability to mac80211Ping-Ke Shih
8822be is 2x2 11ac wifi chip, so report VHT capability to mac80211. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-18rtlwifi: Support A-MSDU in A-MPDU capabilityPing-Ke Shih
Due to the fact that A-MSDU deaggregation is done in software, we set this flag to support the A-MSDU in A-MPDU Signed-off-by: Steven Ting <steventing@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: Use mutex to replace spin_lock to protect IPS and LPSPing-Ke Shih
Enter/leavel IPS and LPS are large critical section, and they can't use sleep function because running in atomic-context, which own a spin_lock. In commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"), it moves LPS functions to thread-context, so this commit can simply change LPS's spin lock to mutex. Considering IPS functions, rtl_ips_nic_on() may be called by TX tasklet (softirq-context) that check whether packet is auth frame. Fortunately, current mac80211 will ask driver to leave IPS using op_config with changed flag IEEE80211_CONF_CHANGE_IDLE, before issuing auth frame, so IPS functions can run in thread-context and use mutex to protect critical section, too. Also, this commit removes some useless spin locks. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Improve debugging by using debugfsPing-Ke Shih
Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0 This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Remove unnecessary parenthesesFrank A. Cancio Bello
This is merged by Ping-Ke Shih from commit a221cb0911b8 ("staging: rtlwifi: Remove unnecessary parentheses"), and original commit log is reserved below. Remove unnecessary parentheses to comply with preferred coding style for the linux kernel and avoid the following checkpatch's message: 'CHECK: Unnecessary parentheses around'. Credits to checkpatch. Signed-off-by: Frank A. Cancio Bello <frank@generalsoftwareinc.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: mark expected switch fall-through in rtl_make_smps_actionGustavo A. R. Silva
This is merged by Ping-Ke Shih from commit 640019bba419 ("staging: rtlwifi: mark expected switch fall-through in rtl_make_smps_action"), and original commit log is reserved below. In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: check for array overflowDan Carpenter
This is merged by Ping-Ke Shih from commit dc33bd4309d2 ("staging: rtlwifi: check for array overflow"), and the original commit log is reserved below. Smatch is distrustful of the "capab" value and marks it as user controlled. I think it actually comes from the firmware? Anyway, I looked at other drivers and they added a bounds check and it seems like a harmless thing to have so I have added it here as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14rtlwifi: always initialize variables given to RT_TRACE()Nicolas Iooss
In rtl_rx_ampdu_apply(), when rtlpriv->cfg->ops->get_btc_status() returns false, RT_TRACE() is called with the values of variables reject_agg and agg_size, which have not been initialized. Always initialize these variables in order to prevent using uninitialized values. This issue has been found with clang. The compiler reported: drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable 'agg_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (rtlpriv->cfg->ops->get_btc_status()) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1671:31: note: uninitialized use occurs here reject_agg, ctrl_agg_size, agg_size); ^~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable 'reject_agg' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (rtlpriv->cfg->ops->get_btc_status()) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/base.c:1671:4: note: uninitialized use occurs here reject_agg, ctrl_agg_size, agg_size); ^~~~~~~~~~ Fixes: 2635664e6e4a ("rtlwifi: Add rx ampdu cfg for btcoexist.") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-08rtlwifi: remove redundant pointer tid_dataColin Ian King
tid_data is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/realtek/rtlwifi/base.c:1581:2: warning: Value stored to 'tid_data' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27rtlwifi: Remove seq_number from rtl_tid_dataPing-Ke Shih
Since mac80211 maintains the sequence number for each STA/TID, driver doesn't need to maintain a copy. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27rtlwifi: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-17rtlwifi: Fix typo in if ... else if ... else constructLarry Finger
The kbuild test robot reports two conditions with no effect (if == else). These are the result of copy and paste typographical errors. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Cc: kbuild-all@01.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Add bw_update parameter for RA mask update.Ping-Ke Shih
- Add new parameter "is_bw_update" to control if current bandwidth setting is updated to FW RA. - After this commit, we keep the same setting as before. - Later, bandwidth update in watchdog is changed to false for 8822BE. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Add TX/RX throughput statistics in periodPing-Ke Shih
The statistic variables use u64 to get higher precision. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Add rtl_get_hal_edca_param() to generate register's format of EDCA.Ping-Ke Shih
Convert from the value of ieee80211_tx_queue_params to Realtek's register value. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Implement rtl_get_tx_hw_rate to yield correct hw_ratePing-Ke Shih
Originally, we get legacy rate only, so we extend to get HT and VHT rate. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Fix MAX MPDU of VHT capabilityPing-Ke Shih
We must choose only one of VHT_CAP among IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895, IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 and IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: Replace hardcode value with macroSouptick Joarder
In _rtl_init_mac80211(), hardcoded value for hw->max_listen_interval and hw->max_rate_tries are replaced by macro and removed the comment. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Uses addr1 instead DA to determine broadcast and multicast addr.Ping-Ke Shih
We should check addr1 to indicate a packet as broadcast or multicast in tx desc. An obvious example, a STA transmit an *unicast* ARP packet where addr1 and DA are the addresses of AP and broadcast respectively. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Fill in_4way field by driverPing-Ke Shih
Because it isn't always correct to use EAPOL to check 4-way, we add a timer to handle exception. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27rtlwifi: kfree entry until after entry->bssid has been accessedColin Ian King
The current code kfree's entry and then dereferences it by accessing entry->bssid. Avoid the dereference-after-free by moving the kfree after the access to entry->bssid. Detected by CoverityScan, CID#1448600 ("Read from pointer after free") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Fill ap_num field by driverPing-Ke Shih
Check beacon and probe_resp frames to know ap_num Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-25Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 New features and bug fixes to quite a few different drivers, but nothing really special standing out. What makes me happy that we have now more vendors actively contributing to upstream drivers. In this pull request we have patches from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I still have patches from Marvell and Quantenna pending in patchwork. Now that's something comparing to how things looked 11 years ago in Jeff Garzik's "State of the Union: Wireless" email: https://lkml.org/lkml/2006/1/5/671 Major changes: wil6210 * add low level RF sector interface via nl80211 vendor commands * add module parameter ftm_mode to load separate firmware for factory testing * support devices with different PCIe bar size * add support for PCIe D3hot in system suspend * remove ioctl interface which should not be in a wireless driver ath10k * go back to using dma_alloc_coherent() for firmware scratch memory * add per chain RSSI reporting brcmfmac * add support multi-scheduled scan * add scheduled scan support for specified BSSIDs * add support for brcm43430 revision 0 wlcore * add wil1285 compatible rsi * add RS9113 USB support iwlwifi * FW API documentation improvements (for tools and htmldoc) * continuing work for the new A000 family * bump the maximum supported FW API to 31 * improve the differentiation between 8000, 9000 and A000 families ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21rtlwifi: btcoexist control to enter/leave LPSPing-Ke Shih
To yield better user experience, have btcoex control LPS's parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Add rx ampdu cfg for btcoexist.Ping-Ke Shih
If RX ampdu is too long, BT will have less time. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Revise special packet notification to be readable format.Ping-Ke Shih
We extend types of special packets to a enumeration from boolean value. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2024-06-08 00:22:48 +0000