summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/efuse.c
AgeCommit message (Collapse)Author
2024-11-06wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failuresGuilherme G. Piccoli
Syzkaller reported a hung task with uevent_show() on stack trace. That specific issue was addressed by another commit [0], but even with that fix applied (for example, running v6.12-rc5) we face another type of hung task that comes from the same reproducer [1]. By investigating that, we could narrow it to the following path: (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and dummy_hcd infrastructure. (b) During the probe of rtl8192cu, the driver ends-up performing an efuse read procedure (which is related to EEPROM load IIUC), and here lies the issue: the function read_efuse() calls read_efuse_byte() many times, as loop iterations depending on the efuse size (in our example, 512 in total). This procedure for reading efuse bytes relies in a loop that performs an I/O read up to *10k* times in case of failures. We measured the time of the loop inside read_efuse_byte() alone, and in this reproducer (which involves the dummy_hcd emulation layer), it takes 15 seconds each. As a consequence, we have the driver stuck in its probe routine for big time, exposing a stack trace like below if we attempt to reboot the system, for example: task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000 Workqueue: usb_hub_wq hub_event Call Trace: __schedule+0xe22/0xeb6 schedule_timeout+0xe7/0x132 __wait_for_common+0xb5/0x12e usb_start_wait_urb+0xc5/0x1ef ? usb_alloc_urb+0x95/0xa4 usb_control_msg+0xff/0x184 _usbctrl_vendorreq_sync+0xa0/0x161 _usb_read_sync+0xb3/0xc5 read_efuse_byte+0x13c/0x146 read_efuse+0x351/0x5f0 efuse_read_all_map+0x42/0x52 rtl_efuse_shadow_map_update+0x60/0xef rtl_get_hwinfo+0x5d/0x1c2 rtl92cu_read_eeprom_info+0x10a/0x8d5 ? rtl92c_read_chip_version+0x14f/0x17e rtl_usb_probe+0x323/0x851 usb_probe_interface+0x278/0x34b really_probe+0x202/0x4a4 __driver_probe_device+0x166/0x1b2 driver_probe_device+0x2f/0xd8 [...] We propose hereby to drastically reduce the attempts of doing the I/O reads in case of failures, restricted to USB devices (given that they're inherently slower than PCIe ones). By retrying up to 10 times (instead of 10000), we got reponsiveness in the reproducer, while seems reasonable to believe that there's no sane USB device implementation in the field requiring this amount of retries at every I/O read in order to properly work. Based on that assumption, it'd be good to have it backported to stable but maybe not since driver implementation (the 10k number comes from day 0), perhaps up to 6.x series makes sense. [0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race") [1] A note about that: this syzkaller report presents multiple reproducers that differs by the type of emulated USB device. For this specific case, check the entry from 2024/08/08 06:23 in the list of crashes; the C repro is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000. Cc: stable@vger.kernel.org # v6.1+ Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com
2024-05-02wifi: rtlwifi: Adjust rtl8192d-common for USBBitterblue Smith
A few of the shared functions need small changes for the USB driver: - firmware loading - efuse reading - rate mask updating - rf register reading - initial gain for scanning Also, add a few macros to wifi.h and initialise rtlhal.interfaceindex for USB devices. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/28100330-f421-4b85-b41b-f1045380cef2@gmail.com
2024-01-19wifi: rtlwifi: Speed up firmware loading for USBBitterblue Smith
Currently it takes almost 6 seconds to upload the firmware for RTL8192CU (and 11 seconds for RTL8192DU). That's because the firmware is uploaded one byte at a time. Also, after plugging the device, the firmware gets uploaded three times before a connection to the AP is established. Maybe this is fine for most users, but when testing changes to the driver it's really annoying to wait so long. Speed up the firmware upload by writing chunks of 64 bytes at a time. This way it takes about 110 ms for RTL8192CU (and about 210 ms for RTL8192DU). PCI devices could upload it in chunks of 4 bytes, but I don't have any to test and commit 89d32c9071aa ("rtlwifi: Download firmware as bytes rather than as dwords") decided otherwise anyway. Allocate memory for the firmware image with kmalloc instead of vzalloc because this memory is passed directly to usb_control_msg(), which can't take memory allocated by vmalloc. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/d9bd4949-6e92-4f35-8b60-3b45f9ad74ab@gmail.com
2020-08-31rtlwifi: Replace RT_TRACE with rtl_dbgLarry Finger
The macro name RT_TRACE makes it seem that it is used for tracing, when is actually used for debugging. Change the name to rtl_dbg. Any Sparse errors exposed by this change were also fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723204244.24457-3-Larry.Finger@lwfinger.net
2019-10-02rtlwifi: Remove set but not used variables 'dataempty','hoffset'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/efuse.c: In function efuse_pg_packet_write: drivers/net/wireless/realtek/rtlwifi/efuse.c:937:24: warning: variable dataempty set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/efuse.c: In function efuse_get_current_size: drivers/net/wireless/realtek/rtlwifi/efuse.c:1202:5: warning: variable hoffset set but not used [-Wunused-but-set-variable] They are not used since commit f1d2b4d338bf ("rtlwifi: rtl818x: Move drivers into new realtek directory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03rtlwifi: remove unused variables 'RTL8712_SDIO_EFUSE_TABLE' and 'MAX_PGPKT_SIZE'YueHaibing
drivers/net/wireless/realtek/rtlwifi/efuse.c:16:31: warning: RTL8712_SDIO_EFUSE_TABLE defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/efuse.c:9:17: warning: MAX_PGPKT_SIZE defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rtlwifi: remove redundant assignment to variable kColin Ian King
The assignment of 0 to variable k is never read once we break out of the loop, so the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25rtlwifi: remove redundant assignment to variable badwordenColin Ian King
The variable badworden is assigned with a value that is never read and it is re-assigned a new value immediately afterwards. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28rtlwifi: Fix all blank line irregularities in main code filesLarry Finger
The types of problems fixed are as follows: WARNING: Missing a blank line after declarations CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Please don't use multiple blank lines There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Remove CamelCase variables from base codeLarry Finger
There are a number of CamelCase variables remaining in the source files of modules rtl_pci, rtl_usb, and rtlwifi. The following checkpatch excettions are also fixed: for_kalle1/0001-rtlwifi-Remove-CamelCase-variables-from-base-code.patch ----------------------------------------------------------------------- CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { WARNING: line over 80 characters #70: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:379: + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != CHECK: No space is necessary after a cast #186: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:396: + status->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #208: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c:335: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #243: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:301: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #252: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:368: + stats.rx_is40mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); CHECK: No space is necessary after a cast #265: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c:475: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); WARNING: Unnecessary space before function pointer arguments #455: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:1462: + void (*writen_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf, WARNING: Unnecessary space before function pointer arguments #483: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:2257: + void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: Replace old-style license informationLarry Finger
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-27rtlwifi: add efuse ops for other componentsPing-Ke Shih
The new component phydm need to access efuse content, so we prepare ops for reference. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: use kcalloc instead of multiplyTobin C. Harding
This is merged by Ping-Ke Shih from commit 85d309d53f7a ("staging: rtlwifi: use kcalloc instead of multiply"), and original commit log is reserved below. checkpatch emits multiple warnings of type WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply Replace two calls to kzalloc() with calls to kcalloc(). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: btcoex: add package_type function to btcoexPing-Ke Shih
The new code handles the package-type of the chip. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtlwifi: Download firmware as bytes rather than as dwordsLarry Finger
The firmware is read from disk as a little-endian byte string. The code that loads the firmware into the device transfers it as 4-byte quantities. The routines that write multi-byte quantities on BE hardware assume that the data are in CPU order, and automatically do the conversion to the LE order required by the device. As a result, the firmware is transmitted incorrectly. Rather than do multiple byte swaps on the data, the download routine is revised to transmit bytes rather than dwords. Although the number of I/O operations is increased, the firmware is not often loaded. All drivers have the same bug, and use essentially the same code to download firmware. These routines have been moved into rtlwifi. Some CamelCase variables have been renamed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: Remove RT_TRACE messages that use DBG_EMERGLarry Finger
These messages are always logged and represent error conditions, thus we can use pr_err(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08rtlwifi: Create common routine to get hardware infoLarry Finger
All of the rtlwifi family of drivers have a similar routine that acquires the hardware info from efuse and initializes a number of variables in the driver's private area. A common routine is created for all drivers to use. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-07-31 01:53:58 +0000