summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
AgeCommit message (Collapse)Author
2018-02-25rtlwifi: rtl8723be: Fix loss of signalLarry Finger
In commit c713fb071edc ("rtlwifi: rtl8821ae: Fix connection lost problem correctly") a problem in rtl8821ae that caused loss of signal was fixed. That same problem has now been reported for rtl8723be. Accordingly, the ASPM L1 latency has been increased from 0 to 7 to fix the instability. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-08wireless: use ARRAY_SIZEJérémy Lefaure
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is not always useful to use a variable to store this constant calculated at compile time. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07rtlwifi: Convert individual interrupt results to structLarry Finger
With the RTL8822BE and later devices, the number of interrupt vectors has grown from 2 to 4. At this point, saving and passing those vectors in a struct makes more sense than using individual scaler variables. In two of the drivers, code to process the second of the interrupt registers was included, but commented out. This patch removes those useless sections. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-08rtlwifi: rtl_pci: Extend recognized interrupt parameters from two to four ISRPing-Ke Shih
8822be checks H2CQ by int_d, so we extend to four ISR. Also, irq_mask is extended to four. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Remove unused cur_rfstate variablesChristos Gkekas
Clean up unused cur_rfstate variables in rtl8188ee, rtl8723ae, rtl8723be and rtl8821ae. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: Add bw_update parameter for RA mask update.Ping-Ke Shih
- Add new parameter "is_bw_update" to control if current bandwidth setting is updated to FW RA. - After this commit, we keep the same setting as before. - Later, bandwidth update in watchdog is changed to false for 8822BE. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13rtlwifi: rtl8192ee: Make driver support 64bits DMA.Ping-Ke Shih
1. Both 32-bit and 64-bit use the same TX/RX buffer desc layout 2. Extend set_desc() and get_desc() to set and get 64-bit address 3. Remove directive DMA_IS_64BIT 4. Add module parameter to turn on 64-bit dma Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-07Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-28rtlwifi: Add board type for 8723be and 8192eePing-Ke Shih
With correct board_type, the phy praser can choose correct parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21Revert "rtlwifi: btcoex: rtl8723be: fix ant_sel not work"Larry Finger
This reverts commit f95d95a7cd5514549dcf6ba754f0ee834cce3e1f. With commit f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work"), the kernel has a NULL pointer dereference oops. This content and the proper fix will be included in a later patch. Fixes: f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Do IQK only once to reduce wifi occupy antennaPing-Ke Shih
Modify 8723be and 8192e only. 8812/8821 do IQK in DM, so we may do it later. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: rtl8723be: fix ant_sel not workPing-Ke Shih
To make ant_sel work, we should call power_on_setting to set antenna correctly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-18rtlwifi: fix spelling mistake: "Pairwiase" -> "Pairwise"Colin Ian King
trivial fixes to spelling mistakes in RT_TRACE messages. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-08rtlwifi: Move items out of rtl_pci_priv and rtl_usb_privLarry Finger
In commit 6773386f977c ("rtlwifi: rtl8192c-common: Fix "BUG: KASAN:"), a BUG detected when CONFIG_KASAN=y was fixed by reordering the layouts of struct rtl_pci_priv, and struct rtl_usb_priv so that the variables used by both PCI and USB drivers have the same offsets in both structs. The better fix of relocating the critical variables into struct rtl_priv was deferred as these changes do not have to be applied to stable kernels. This change also removes CamelCase variables with pLed0 => pled0. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: fix ant_sel codePing-Ke Shih
When ant_sel is set, we need to fill single_ant_path to select correct antenna path. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: btcoex: add package_type function to btcoexPing-Ke Shih
The new code handles the package-type of the chip. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: move btcoex's ant_num declarationPing-Ke Shih
File halbtcoutsrc.c is a better place for routine rtl_get_hwpg_ant_num() than file rtl_btc.c. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: rtl8723be: btcoexist: Add single_ant_pathPing-Ke Shih
Some devices with RTL8732BE wifi/Bluetooth adapters are shipped with only a single antenna. On a subset of these, the EEPROM is incorectly coded to indicate the wrong connection. The resulting problems have been fixed for wifi. This change handles them for BT. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: rtl8723be: Remove all instances of DBG_EMERGLarry Finger
This is a step toward eliminating the RT_TRACE macros. Those calls that have DBG_EMERG as the level are always logged, and they represent error conditions, thus they are replaced with pr_err(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-30rtlwifi: Replace local debug macro RT_ASSERTLarry Finger
This macro can be replaced with WARN_ONCE. In addition to using a standard debugging macro for these critical errors, we also get a stack dump. In rtl8821ae/hw.c, a senseless comment was removed, and an incorrect indentation was fixed. This patch also fixes two places in each of rtl8192ee, rtl8723be, and rtl8821ae where the logical condition was incorrect. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27rtlwifi: Add HAL_DEF_WOWLAN case to *_get_hw() routinesLarry Finger
Only rtl8821ae implements WOWLAN; however, the other drivers may receive a call requesting information about this mode. The other drivers need to ignore the request rather than logging that the default branch of the switch statement has been reached. Reported by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27rtlwifi: Add switch variable to 'switch case not processed' messagesJoe Perches
Help along debugging by showing what switch/case variable is not being processed in these messages. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08rtlwifi: rtl8723be: Convert driver to use common hardware info routineLarry Finger
The driver for RTL8723BE chips is converted to use the common routine for getting the hardware information. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08rtlwifi: Fix typo in printkMasanari Iida
This patch fix spelling typos found in drivers/net/wireless/realtek. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-08rtlwifi: Add missing newlines to RT_TRACE callsJoe Perches
RT_TRACE does not add a newline to the end of a message and always emits at KERN_DEBUG so these are susceptible to message interleaving from other processes without the newline. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-16rtlwifi: fix error handling in *_read_adapter_info()Arnd Bergmann
There are nine copies of the _rtl88ee_read_adapter_info() function, and most but not all of them cause a build warning in some configurations: rtl8192de/hw.c: In function '_rtl92de_read_adapter_info': rtl8192de/hw.c:1767:12: error: 'hwinfo' may be used uninitialized in this function [-Werror=maybe-uninitialized] rtl8723ae/hw.c: In function '_rtl8723e_read_adapter_info.constprop': rtlwifi/rtl8723ae/hw.c:1654:12: error: 'hwinfo' may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem is that when rtlefuse->epromtype is something other than EEPROM_BOOT_EFUSE, the rest of the function uses undefined data, resulting in random behavior later. Apparently, in some drivers, the problem was already found and fixed but the fix did not make it into the others. This picks one approach to deal with the problem and applies identical code to all 9 files, to simplify the later consolidation of those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8723be: Add antenna select module parameterLarry Finger
A number of new laptops have been delivered with only a single antenna. In principle, this is OK; however, a problem arises when the on-board EEPROM is programmed to use the other antenna connection. The option of opening the computer and moving the connector is not always possible as it will void the warranty in some cases. In addition, this solution breaks the Windows driver when the box dual boots Linux and Windows. A fix involving a new module parameter has been developed. This commit adds the new parameter and implements the changes needed for the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.0+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2024-06-20 02:36:32 +0000