summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi
AgeCommit message (Collapse)Author
2017-10-02rtlwifi: rtl8821ae: Fix connection lost problemLarry Finger
In commit 40b368af4b75 ("rtlwifi: Fix alignment issues"), the read of REG_DBI_READ was changed from 16 to 8 bits. For unknown reasonsi this change results in reduced stability for the wireless connection. This regression was located using bisection. Fixes: 40b368af4b75 ("rtlwifi: Fix alignment issues") Reported-and-tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.11+ Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-07rtlwifi: btcoexist: Fix antenna selection codeLarry Finger
In commit 87d8a9f35202 ("rtlwifi: btcoex: call bind to setup btcoex"), the code turns on a call to exhalbtc_bind_bt_coex_withadapter(). This routine contains a bug that causes incorrect antenna selection for those HP laptops with only one antenna and an incorrectly programmed EFUSE. These boxes are the ones that need the ant_sel module parameter. Fixes: 87d8a9f35202 ("rtlwifi: btcoex: call bind to setup btcoex") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.13+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-07rtlwifi: btcoexist: Fix breakage of ant_sel for rtl8723beLarry Finger
In commit bcd37f4a0831 ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done"), there is an additional error when the module parameter ant_sel is used to select the auxilary antenna. The error is that the antenna selection is not checked when writing the antenna selection register. Fixes: bcd37f4a0831 ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.12+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-31rtlwifi: rtl8723be: fix duplicated code for different branchesGustavo A. R. Silva
Refactor code in order to avoid identical code for different branches. Addresses-Coverity-ID: 1248728 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24rtlwifi: rtl8821ae: fix spelling mistake: "faill" -> "failed"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24rtlwifi: make a couple arrays largerDan Carpenter
This is a static checker fix. "cal_num" is 10. We're declaring the tx_dt[] and rx_td[] arrays as 3 element arrays. The static checker complains that we do: tx_dt[cal] = (vdf_y[1]>>20)-(vdf_y[0]>>20); "cal" is the iterator and it is in the 0-9 range so it looks like we could corrupt memory. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24rtlwifi: btcoex: 23b 1ant: fix duplicated code for different branchesGustavo A. R. Silva
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Addresses-Coverity-ID: 1415177 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8192cu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rtlwifi: constify rate_control_ops structureBhumika Goyal
rate_control_ops structure is only passed as an argument to the function ieee80211_rate_control_{register/unregister}. This argument is of type const, so declare the structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-07Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03rtlwifi: Replace hardcode value with macroSouptick Joarder
In _rtl_init_mac80211(), hardcoded value for hw->max_listen_interval and hw->max_rate_tries are replaced by macro and removed the comment. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192ee: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 1899 928 0 2827 b0b realtek/rtlwifi/rtl8192ee/sw.o File size After adding 'const': text data bss dec hex filename 1963 864 0 2827 b0b realtek/rtlwifi/rtl8192ee/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8188ee: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 3090 912 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o File size After adding 'const': text data bss dec hex filename 3154 848 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8723be: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 3032 912 0 3944 f68 realtek/rtlwifi/rtl8723be/sw.o File size After adding 'const': text data bss dec hex filename 3096 848 0 3944 f68 realtek/rtlwifi/rtl8723be/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8723ae: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2775 912 0 3687 e67 realtek/rtlwifi/rtl8723ae/sw.o File size After adding 'const': text data bss dec hex filename 2839 848 0 3687 e67 realtek/rtlwifi/rtl8723ae/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8821ae: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2491 960 0 3451 d7b realtek/rtlwifi/rtl8821ae/sw.o File size After adding 'const': text data bss dec hex filename 2587 864 0 3451 d7b realtek/rtlwifi/rtl8821ae/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192se: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2817 1040 0 3857 f11 realtek/rtlwifi/rtl8192se/sw.o File size After adding 'const': text data bss dec hex filename 3009 848 0 3857 f11 realtek/rtlwifi/rtl8192se/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192de: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2833 945 12 3790 ece realtek/rtlwifi/rtl8192de/sw.o File size After adding 'const': text data bss dec hex filename 2929 849 12 3790 ece realtek/rtlwifi/rtl8192de/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: Fix fallback firmware loadingSven Joachim
Commit f70e4df2b384 ("rtlwifi: Add code to read new versions of firmware") added code to load an old firmware file if the new one is not available. Unfortunately that code is never reached because request_firmware_nowait() does not wait for the firmware to show up and returns 0 even if the file is not there. Use the existing fallback mechanism introduced by commit 62009b7f1279 ("rtlwifi: rtl8192cu: Add new firmware") instead. Fixes: f70e4df2b384 ("rtlwifi: Add code to read new versions of firmware") Cc: stable@vger.kernel.org Signed-off-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapterMalcolm Priestley
_rtl_pci_find_adapter fail path will jump to label fail3 for unsupported adapter types. However, on course for fail3 there will be call rtl_deinit_core before rtl_init_core. For the inclusion of checking pci_iounmap this fail can be moved to fail2. Fixes [ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi] Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-28rtlwifi: rtl8821ae: Fix HW_VAR_NAV_UPPER operationDan Carpenter
The cast here is wrong. We want to cast the pointer but we accidentally do a no-op cast of the value. We normally want to set us_nav_upper to WIFI_NAV_UPPER_US (30000) but because of this bug we instead set it to 184 on little endian systems and 0 on big endian ones. Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Fix memory leak when firmware request failsSouptick Joarder
This patch will fix memory leak when firmware request fails Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Remove unused dummy functionSouptick Joarder
Removing unused dummy function Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: remove dummy function callSouptick Joarder
_rtl92cu_init_usb_aggregation() can be removed as it is dummy one Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: move IS_HARDWARE_TYPE_xxx checker to wifi.hPing-Ke Shih
Use rtlpriv instead of rtlhal as argument, so driver and btcoex use the same definitions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Uses addr1 instead DA to determine broadcast and multicast addr.Ping-Ke Shih
We should check addr1 to indicate a packet as broadcast or multicast in tx desc. An obvious example, a STA transmit an *unicast* ARP packet where addr1 and DA are the addresses of AP and broadcast respectively. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Rename rtl_desc92_rate to rtl_desc_ratePing-Ke Shih
This is a common enumeration, so we use a common name. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Update 8723be new phy parameters and its parser.Ping-Ke Shih
There are new PHY table values for the RTL8723BE. The changes require new parsing code. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: add amplifier type for 8812aePing-Ke Shih
With correct amplifier_type, the phy praser can choose correct parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Add board type for 8723be and 8192eePing-Ke Shih
With correct board_type, the phy praser can choose correct parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Add BT_MP_INFO to c2h handler.Ping-Ke Shih
We use H2C to ask BT's status, and C2H will return the status. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rtlwifi: Fill in_4way field by driverPing-Ke Shih
Because it isn't always correct to use EAPOL to check 4-way, we add a timer to handle exception. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27rtlwifi: kfree entry until after entry->bssid has been accessedColin Ian King
The current code kfree's entry and then dereferences it by accessing entry->bssid. Avoid the dereference-after-free by moving the kfree after the access to entry->bssid. Detected by CoverityScan, CID#1448600 ("Read from pointer after free") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21Revert "rtlwifi: btcoex: rtl8723be: fix ant_sel not work"Larry Finger
This reverts commit f95d95a7cd5514549dcf6ba754f0ee834cce3e1f. With commit f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work"), the kernel has a NULL pointer dereference oops. This content and the proper fix will be included in a later patch. Fixes: f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-19rtlwifi: remove useless codeGustavo A. R. Silva
Remove useless local variables last_read_point and last_txw_point and the code related. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-28rtlwifi: Add in_4way field for btcoexistPing-Ke Shih
If wifi is in 4way, btcoex give wifi higher priority to use antenna. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Fill ap_num field by driverPing-Ke Shih
Check beacon and probe_resp frames to know ap_num Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Add ap_num field for btcoexistPing-Ke Shih
If there are many AP (dirty environment), we use another strategy set to resolve coex issue. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Add return value to btc_set.Ping-Ke Shih
We will use return value to handle error case. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Update some cases in btc_get function -- roam, 5G, AP mode, and ↵Ping-Ke Shih
return value. Return value may be false in some situations. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Modify power mode parameters of 8723be and 8821ae.Ping-Ke Shih
Change the parameters suggested by FW. awake int: 2 smart_ps: 2 or 0 ps_mode: 2 (MAX -- every DTIM) Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Do IQK only once to reduce wifi occupy antennaPing-Ke Shih
Modify 8723be and 8192e only. 8812/8821 do IQK in DM, so we may do it later. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-28rtlwifi: Fix a2dp choppy while BT RSSI stays on threshold.Ping-Ke Shih
In this case, BTC asks to enter/leave PS mode frequently to cause A2DP choppy. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-25Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 New features and bug fixes to quite a few different drivers, but nothing really special standing out. What makes me happy that we have now more vendors actively contributing to upstream drivers. In this pull request we have patches from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I still have patches from Marvell and Quantenna pending in patchwork. Now that's something comparing to how things looked 11 years ago in Jeff Garzik's "State of the Union: Wireless" email: https://lkml.org/lkml/2006/1/5/671 Major changes: wil6210 * add low level RF sector interface via nl80211 vendor commands * add module parameter ftm_mode to load separate firmware for factory testing * support devices with different PCIe bar size * add support for PCIe D3hot in system suspend * remove ioctl interface which should not be in a wireless driver ath10k * go back to using dma_alloc_coherent() for firmware scratch memory * add per chain RSSI reporting brcmfmac * add support multi-scheduled scan * add scheduled scan support for specified BSSIDs * add support for brcm43430 revision 0 wlcore * add wil1285 compatible rsi * add RS9113 USB support iwlwifi * FW API documentation improvements (for tools and htmldoc) * continuing work for the new A000 family * bump the maximum supported FW API to 31 * improve the differentiation between 8000, 9000 and A000 families ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21rtlwifi: btcoexist control to enter/leave LPSPing-Ke Shih
To yield better user experience, have btcoex control LPS's parameters. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: add btc_is_bt_lps_on() for btcoexistPing-Ke Shih
If LPS is controlled by btcoex, this function tell driver LPS is on or off. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Add rx ampdu cfg for btcoexist.Ping-Ke Shih
If RX ampdu is too long, BT will have less time. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Add btcoex record_pwr_modePing-Ke Shih
Add btcoex record pwr mode to control LPS's parameters and share time with BT. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Revise special packet notification to be readable format.Ping-Ke Shih
We extend types of special packets to a enumeration from boolean value. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-04-25 10:50:59 +0000