Age | Commit message (Collapse) | Author |
|
Originally, we have an active flag to record whether we have set PHY once.
After impending MLO support, there will be dual-PHY and they can be set
individually on Wi-Fi 7 chips. So, we now have active flag per PHY and
handle them individually.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925020119.13170-3-pkshih@realtek.com
|
|
To support MLO, we initialize things on dual HW bands of Wi-Fi 7 chip.
And, each link will indicate which HW band it's bound to. So, in link
control flow, we control major things based on target link's HW band
instead of hardcode like RTW89_PHY_X or RTW89_MAC_X.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925020119.13170-2-pkshih@realtek.com
|
|
compatibility
Read calibration value of PCI RX offset, and set to manual mode as the
value at PCI probe to prevent abnormal calibration results at runtime.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925013901.9835-5-pkshih@realtek.com
|
|
To use manual mode to set value of filter out EQ, read the source value of
filter out EQ coded in gray code, and write to the target register in
binary number. The function to convert from gray code to binary number is
wrong originally, causing unexpected EQ, so fix it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925013901.9835-4-pkshih@realtek.com
|
|
For adaption EQ circuit, this HW design and affected by EIEOS (Electrical
Idle Exit Order Set) amplitude from platform and process from IC, so
disable EQ to improve that.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925013901.9835-3-pkshih@realtek.com
|
|
The PCI settings aren't always persistent after chip suspends, so
reconfigure the settings after chip resumes. Since most of these settings
are the same, consolidate them into a function to avoid missing somewhere.
Fix the missing case of 8922AE resume flow.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240925013901.9835-2-pkshih@realtek.com
|
|
rtw8703b_query_rx_desc(), rtw8723d_query_rx_desc(),
rtw8821c_query_rx_desc(), rtw8822b_query_rx_desc(), and
rtw8822c_query_rx_desc() are almost identical, so replace them all with
a single function, rtw_rx_query_rx_desc().
Also, access the RX descriptor using a struct with __le32 members and
le32_get_bits().
Tested with RTL8811CU, RTL8811AU, and RTL8812AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Ping-Ke Shih <pkshih@realtek.com> # RTL8723DE and RTL8822CE
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/913f1747-38fc-4409-85a4-57bb9cee506b@gmail.com
|
|
_dpk_dgain_read()
The return value of _dpk_dgain_read() is not used afterward, so remove
it safely.
Addresses-Coverity-ID: 1504753 ("Unused value")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-4-pkshih@realtek.com
|
|
For the case of DBCC enabled and fwrole version 0, the local variable
wl_rinfo.dbcc_2g_phy might not be set by following for-loop, leading
uninitialized variable before using.
Addresses-Coverity-ID: 1586724 ("Uninitialized scalar variable")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-3-pkshih@realtek.com
|
|
The return value of ieee80211_probereq_get() might be NULL, so check it
before using to avoid NULL pointer access.
Addresses-Coverity-ID: 1529805 ("Dereference null return value")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240919081216.28505-2-pkshih@realtek.com
|
|
The drv_priv hooked to mac80211 become as below.
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_vif | <---> | rtw89_vif | -------> | rtw89_vif_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_vif_link |
+----------------+
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_sta | <---> | rtw89_sta | -------> | rtw89_sta_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_sta_link |
+----------------+
The relation bewteen mac80211 link_id and our link instance is like below.
|\
(link_id) | \
0 -------- | |
1 -------- | | ------ instance-0 (link_id: X) -> work on HW band 0
2 -------- | |
... | | ------ instance-1 (link_id: Y) -> work on HW band 1
14 -------- | |
| /
|/
N.B. For cases of non-MLD connection, we set our link instance-0
active with link_id 0. So, our code flow can be compatible between
non-MLD connection and MLD connection.
Based on above, we tweak entire driver architecture first. But, we don't
dynamically enable multiple links here. That will be handled separately.
Most of the things changed here are changing flows to iterate all active
links and read bss_conf/link_sta data according to target link. And, for
cases of scan, ROC, WOW, we use instance-0 to deal with the request.
There are some things listed below, which work for now but need to extend
before multiple active links.
1. tx path
select suitable link instance among multiple active links
2. rx path
determine rx link by PPDU instead of always link instance-0
3. CAM
apply MLD pairwise key to any active links dynamically
Besides, PS code cannot easily work along with tweaking architecture. With
supporting MLO flag (currently false), we disable PS first and will fix it
by another commit in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-8-pkshih@realtek.com
|
|
Refactor STA related functions, e.g. add/assoc/disassoc/disconnect/remove
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-7-pkshih@realtek.com
|
|
Refactor VIF related functions, e.g. add/remove/assoc/mapping
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-6-pkshih@realtek.com
|
|
Tweak code to not always access sta->deflink directly. Instead,
according to link_id, read target link_sta from sta->link[].
For now, rtwsta_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-5-pkshih@realtek.com
|
|
Tweak code to not always access vif->bss_conf directly. Instead,
according to link_id, read target bss_conf from vif->link_conf[].
For now, rtwvif_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-4-pkshih@realtek.com
|
|
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_sta_link *sta_to_rtwsta_safe(struct ieee80211_sta *sta)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-3-pkshih@realtek.com
|
|
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_vif_link *vif_to_rtwvif_safe(struct ieee80211_vif *vif)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-2-pkshih@realtek.com
|
|
When removing kernel modules by:
rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core
Driver uses skb_queue_purge() to purge TX skb, but not report tx status
causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue()
to correct this.
Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing
between TX work and purge TX queue, flush and destroy TX work in advance.
wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local
choice (Reason: 3=DEAUTH_LEAVING)
------------[ cut here ]------------
Have pending ack frames!
WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
CPU: 3 PID: 9232 Comm: rmmod Tainted: G C
6.10.1-200.fc40.aarch64 #1
Hardware name: pine64 Pine64 PinePhone Braveheart
(1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
sp : ffff80008c1b37b0
x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0
x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff
x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000
x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000
x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964
x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0
x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000
Call trace:
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
idr_for_each+0x74/0x110
ieee80211_free_hw+0x44/0xe8 [mac80211]
rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio]
sdio_bus_remove+0x44/0x180
device_remove+0x54/0x90
device_release_driver_internal+0x1d4/0x238
driver_detach+0x54/0xc0
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x78
sdio_unregister_driver+0x2c/0x40
rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs]
__do_sys_delete_module.isra.0+0x190/0x338
__arm64_sys_delete_module+0x1c/0x30
invoke_syscall+0x74/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
---[ end trace 0000000000000000 ]---
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALeDE9OAa56KMzgknaCD3quOgYuEHFx9_hcT=OFgmMAb+8MPyA@mail.gmail.com/
Tested-by: Ping-Ke Shih <pkshih@realtek.com> # 8723DU
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-2-pkshih@realtek.com
|
|
These are never modified, so make them const:
card_enable_flow_8703b
card_disable_flow_8703b
rtw8703b_ops
rtw8723d_ops
card_enable_flow_8723d
card_disable_flow_8723d
trans_carddis_to_cardemu_8821c
trans_cardemu_to_act_8821c
trans_act_to_cardemu_8821c
trans_cardemu_to_carddis_8821c
card_enable_flow_8821c
card_disable_flow_8821c
rtw8821c_dig
page_table_8821c
rqpn_table_8821c
prioq_addrs_8821c
rtw8821c_ops
card_enable_flow_8822b
card_disable_flow_8822b
prioq_addrs_8822b
rtw8822b_ops
rtw8822b_edcca_th
card_enable_flow_8822c
card_disable_flow_8822c
prioq_addrs_8822c
rtw8822c_ops
rtw8822c_edcca_th
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/dae7994f-3491-40de-b537-ebf68df084bb@gmail.com
|
|
Update DACK (digital-to-analog converters calibration) log to v2 by
firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-6-pkshih@realtek.com
|
|
Print out IQ signal calibration log from firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-5-pkshih@realtek.com
|
|
TSSI is short for transmitter signal strength indication. Print out the
TSSI log from firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-4-pkshih@realtek.com
|
|
RX DCK stands for receiver DC calibration. The v1 format adds a field to
indicate the calibration is for operation channel or an average value for
all scanning channels. Update the format accordingly, and increase
firmware format sequence to 2.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-3-pkshih@realtek.com
|
|
Firmware needs more time to execute TSSI calibration command. Enlarge
timeout time accordingly, otherwise driver throws messages:
rtw89_8922ae 0000:03:00.0: failed to wait RF TSSI
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-2-pkshih@realtek.com
|
|
Don't populate the read-only arrays params, toshiba_smid1, toshiba_smid2,
samsung_smid and lenovo_smid on the stack at run time, instead make them
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240912135335.590464-1-colin.i.king@gmail.com
|
|
wl_info v7
The counts will be used by MLO, and it is ongoing to add the code, so add
debug message in todo part to avoid warnings reported by clang:
coex.c:6323:23: warning:
variable 'cnt_2g' set but not used [-Wunused-but-set-variable]
6323 | u8 i, mode, cnt = 0, cnt_2g = 0, cnt_5g = 0, ...
| ^
coex.c:6323:35: warning:
variable 'cnt_5g' set but not used [-Wunused-but-set-variable]
6323 | u8 i, mode, cnt = 0, cnt_2g = 0, cnt_5g = 0, ...
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240912021626.10494-1-pkshih@realtek.com
|
|
rtw-next patches for v6.12
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
|
|
Because the loop-expression will do one more time before getting false from
cond-expression, the original code copied one more entry size beyond valid
region.
Fix it by moving the entry copy to loop-body.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240902015803.20420-1-pkshih@realtek.com
|
|
To get more accurate RSSI, this commit includes frequency domain RSSI
info in RSSI calculation. Add correspond physts parsing and macro to
get frequency domain RSSI information for supported IC.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240828055217.10263-3-pkshih@realtek.com
|
|
Use RSSI without subtracting offset as packet detection lower bound and
set an absolute minimal threshold. It's equivalent to setting a higher
noise floor, thereby reducing false alarm and improving interference
endurance.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240828055217.10263-2-pkshih@realtek.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The scan interval option is the period in unit of second for WoWLAN
firmware to do each scan. We get the option from cfg80211 and practice it.
If the interval is too short for firmware to finish one scan, the firmware
will start next scan immediately after finishing one and the WiFi chip
could never enter idle mode to reduce power consumption.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240826090439.17242-5-pkshih@realtek.com
|
|
Enable net-detect in WoWLAN stub of 8922a, and declare net-detect
support up to 8 SSIDs.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240826090439.17242-4-pkshih@realtek.com
|
|
The C2H packet of FW-IPS mode is not handled by driver in the suspend
flow, and lead to WoWLAN firmware fail to enter PS mode and even some
SER happen. So add wait function for H2C of FW-IPS mode to check driver
handle the C2H packet before disabling interrupt and make the net-detect
function work fine.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240826090439.17242-3-pkshih@realtek.com
|
|
Each condition binding to the same wait should be unique. AOAC code misused
the wait of FW offload series and broke the above rule. It added another
macro to generate wait condition of WoWLAN/AOAC, but the results conflict
to the ones of FW offload series. It means that we might be completed
wrongly in logic. We don't want things work/read like this and should
have avoided this.
Fix this by adding another wait which aims for WoWLAN functions.
Fixes: ff53fce5c78b ("wifi: rtw89: wow: update latest PTK GTK info to mac80211 after resume")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240826090439.17242-2-pkshih@realtek.com
|
|
A mac_id as an instance in firmware has to be assigned for each station
including AP and connected stations. Firmware will use the mac_id to
control TX rate and do statistics.
Assignment rule is to assign mac_id to each vif when adding vif.
For station mode, sta->mac_id will reuse vif->mac_id. For AP mode,
dynamically allocate an sta->mac_id to a station, and vif->mac_id is
used to send broadcast/multicast packets which are not belong to
a station. For example,
vif->mac_id sta->mac_id
vif0 (STA mode) 0 0
vif1 (AP mode) 1 2...
By the way, remove unused RTW_BC_MC_MACID, which was planed to send
broadcast/multicast packets on fixed mac_id.
Tested-on RTL8822CE with STA + AP SCC mode.
Link: https://lore.kernel.org/linux-wireless/e4be0a75-43b2-4ae5-9aab-5c4a88e78097@gmail.com/
Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819025248.17939-1-pkshih@realtek.com
|
|
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <stable@vger.kernel.org> # 6.6.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com
|
|
Configure supported link number by chip. And, introduce driver capability
flag for MLO. Driver should depend on runtime FW features and chip info to
determine whether to set the MLO capability flag or not. Once the MLO flag
is set, driver will consider/register/initialize things for MLO usages.
However, we just add the driver MLO capability flag ahead and don't really
set it. Then, we can start to tweak driver architecture for MLO. Some code
should depend on this flag. And after tweaking driver architecture is done,
we will set it based on runtime conditions as mentioned above.
Besides, MLD number supported by HW should be
chip supported mac_id number / chip supported link number
Without driver MLO capability flag, we allocate stations based on supported
mac_id number. With driver MLO capability flag, we allocate stations based
on supported MLD number.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-9-pkshih@realtek.com
|
|
The target enum has been renamed to rtw89_"chanctx"_idx. So for
readability, rename roc_entity_idx to roc_"chanctx"_idx to align.
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-8-pkshih@realtek.com
|
|
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8922A
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-7-pkshih@realtek.com
|
|
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852C
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-6-pkshih@realtek.com
|
|
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852BX
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-5-pkshih@realtek.com
|
|
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852A
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-4-pkshih@realtek.com
|
|
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8851B
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-3-pkshih@realtek.com
|
|
Originally, all chips have implemented rfk_band_changed() and access chan
with hard-code RTW89_CHANCTX_0 in it. But, it's problematic when the chip
supports multiple channels.
So, change the prototype of rfk_band_changed() and pass chan ahead. And,
we will refine the implementation of each chip in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-2-pkshih@realtek.com
|
|
There are many features need the information those record at Wi-Fi role
structure. Implement the corresponding code for using.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240816124614.25592-5-pkshih@realtek.com
|
|
To get Wi-Fi channel & bandwidth information from new Wi-Fi role format.
Bluetooth will negotiate which channel to do TX/RX with connected device.
And Bluetooth will maintain a hopping map, that describe the usable
channels. To avoid the interference from Wi-Fi 2.4GHz/Bluetooth each other,
Bluetooth must not to hop into Wi-Fi channel.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240816124614.25592-4-pkshih@realtek.com
|
|
This version included new introduced Wi-Fi DBCC information related to
WiFi role.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240816124614.25592-3-pkshih@realtek.com
|
|
RTL8852BT
Add the firmware related version code for RTL8852BT version 0.29.90.0.
And add the version 7 report control structure format. Firmware will
collect counters like mailbox count, RF on/off count, and some Bluetooth
related counters into this structure and pass to driver periodically.
It will help to understand how the firmware mechanism working.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240816124614.25592-2-pkshih@realtek.com
|
|
If the PPDU length for VHT rate exceeds 0x40000, calculating the PSDU
length will overflow. TMAC will determine the length to be too small and
as a result, all packets will be sent as ZLD (Zero Length Delimiter).
Fixes: 5f7e92c59b8e ("wifi: rtw89: 8852b: set AMSDU limit to 5000")
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240815134054.44649-1-pkshih@realtek.com
|